Complex metal chlorides

A few authors have mentioned that the use of chloride metal complexes gives a reproducible amount of grafted metal Benvenutti et al. [34] for the grafting of SbCU on silica in CCI4 at the solvent-reflux temperature, Lindblad and Lindfors [36] for the grafting of WOCU on silica at 473 K, Haukka and Lakomaa [26] for the grafting of TiCU on silica at 450 K and 723 K. 

The central ions in (oxy)chloride metal complexes are in a high oxidation state that is preserved during anchoring (Eq. 5) and grafting. Therefore, these grafted catalysts are mainly used to catalyze oxidation reactions, e.g. oxidative dehydrogenation of ethylbenzene [31], oxidation of acrolein [29], methanol [10], and 0-xylene [30, 37],... 

Less systematically studied have been chloride metal complexes and those containing alkoxidc ligands. Some studies suggest that they arc less reliable for obtaining species as well-defined as with allyl precursors. However, recent works [26, 27, 36, 42-44, 71] devoted to the anchoring/grafting in vapor phase (CVD) (see Sections C and D), show that a well-defined supported phase may be obtained when each preparation parameter is carefully controlled and a systematic procedure is used. 

However, one must be aware that (oxy)chloride metal complexes are only used for the preparation of grafted ions in a rather high oxidation state whereas alkoxide and allyl precursors can provide ions in various oxidation states (Figs. 3-5). 

All the early literature concerning thiazoles mentions numerous metallic complex-salts formed by addition to the thiazole of the aqueous solution of the metal salt and that could be used for identification purposes. The most usual complexes so obtained are platinum double salts, for example, (4-methylthiazole HC1)2 PtCU (m.p. deep 204°C) (25), or mercuric chloride derivatives, for example, 2,4-dimethyl-thiazole 2 HgCl (m.p. deep 176-177°C) (458). 

Acylation. Aliphatic amine oxides react with acylating agents such as acetic anhydride and acetyl chloride to form either A[,A/-diaLkylamides and aldehyde (34), the Polonovski reaction, or an ester, depending upon the polarity of the solvent used (35,36). Along with a polar mechanism (37), a metal-complex-induced mechanism involving a free-radical intermediate has been proposed. 

Comparable with the chloride system, complex ions of the form M2 ThX3] (A =Br [44490-064], M = (CH3) N, (C2H3) N X = I [44490-18-8], M = (C2H3) N, (CH3)3C3H3N) are known where the metal center is octahedral. Additional information on thorium bromides and iodides can be found in the hterature (81). 

The advantages of titanium complexes over other metallic complexes is high selectivity, which can be readily adjusted by proper selection of ligands. Moreover, they are relative iaert to redox processes. The most common synthesis of chiral titanium complexes iavolves displacement of chloride or alkoxide groups on titanium with a chiral ligand, L ... 

Condensation of vinyl chloride with formaldehyde and HCl (Prins reaction) yields 3,3-dichloro-l-propanol [83682-72-8] and 2,3-dichloro-l-propanol [616-23-9]. The 1,1-addition of chloroform [67-66-3] as well as the addition of other polyhalogen compounds to vinyl chloride are cataly2ed by transition-metal complexes (58). In the presence of iron pentacarbonyl [13463-40-6] both bromoform [75-25-2] CHBr, and iodoform [75-47-8] CHl, add to vinyl chloride (59,60). Other useful products of vinyl chloride addition reactions include 2,2-di luoro-4-chloro-l,3-dioxolane [162970-83-4] (61), 2-chloro-l-propanol [78-89-7] (62), 2-chloropropionaldehyde [683-50-1] (63), 4-nitrophenyl-p,p-dichloroethyl ketone [31689-13-1] (64), and p,p-dichloroethyl phenyl sulfone [3123-10-2] (65). 

Arsonium salts have found considerable use in analytical chemistry. One such use involves the extraction of a metal complex in aqueous solution with tetraphenyiarsonium chloride in an organic solvent. Titanium(IV) thiocyanate [35787-79-2] (157) and copper(II) thiocyanate [15192-76-4] (158) in hydrochloric acid solution have been extracted using tetraphenyiarsonium chloride in chloroform solution in this manner, and the Ti(IV) and Cu(II) thiocyanates deterrnined spectrophotometricaHy. Cobalt, palladium, tungsten, niobium, and molybdenum have been deterrnined in a similar manner. In addition to their use for the deterrnination of metals, anions such as perchlorate and perrhenate have been deterrnined as arsonium salts. Tetraphenyiarsonium permanganate is the only known insoluble salt of this anion. 

Organic Halides. Alkyl halides and aiyl halides, activated by election withdrawing groups (such as NO2) in the ortho or para positions, react with alkyleneamines to form mono- or disubstituted derivatives. Product distribution is controlled by reactant ratio, metal complexation or choice of solvent (16,17). Mixing methylene chloride [75-09-2J and EDA reportedly causes a mnaway reaction (18). 

A number of attempts to produce tire refractory metals, such as titanium and zirconium, by molten chloride electrolysis have not met widr success with two exceptions. The electrolysis of caesium salts such as Cs2ZrCl6 and CsTaCle, and of the fluorides Na2ZrF6 and NaTaFg have produced satisfactoty products on the laboratory scale (Flengas and Pint, 1969) but other systems have produced merely metallic dusts aird dendritic deposits. These observations suggest tlrat, as in tire case of metal deposition from aqueous electrolytes, e.g. Ag from Ag(CN)/ instead of from AgNOj, tire formation of stable metal complexes in tire liquid electrolyte is the key to success. 

Thermodynamic data show that the stabilities of the caesium chloride-metal chloride complexes are greater than the conesponding sodium and potassium compounds, and tire fluorides form complexes more readily tlrair the chlorides, in the solid state. It would seem that tire stabilities of these compounds would transfer into tire liquid state. In fact, it has been possible to account for the heats of formation of molten salt mixtures by the assumption that molten complex salts contain complex as well as simple anions, so tlrat tire heat of formation of the liquid mixtures is tire mole fraction weighted product of the pure components and the complex. For example, in the CsCl-ZrCU system the heat of formation is given on each side of tire complex compound composition, the mole fraction of the compound... 

The purity of ionic liquids is a key parameter, especially when they are used as solvents for transition metal complexes (see Section 5.2). The presence of impurities arising from their mode of preparation can change their physical and chemical properties. Even trace amounts of impurities (e.g., Lewis bases, water, chloride anion) can poison the active catalyst, due to its generally low concentration in the solvent. The control of ionic liquid quality is thus of utmost importance. 

Attempts have been made to catalyze the arrangement of 3-oxaquadricyclane to oxepins with transition-metal complexes.1 32 1 35 When dimethyl 2,4-dimethyl-3-oxaquadricyclane-l,5-dicarboxylate is treated with bis(benzonitrile)dichloroplatinum(II) or dicarbonylrhodium chloride dimer, an oxepin with a substitution pattern different from that following thermolysis is obtained as the main product. Instead of dimethyl 2,7-dimethyloxepin-4,5-dicarboxylate, the product of the thermal isomerization, dimethyl 2,5-dimethyloxepin-3,4-dicarboxylate (12), is formed due to the cleavage of a C O bond. This transition metal catalyzed cleavage accounts also for the formation of a 6-hydroxyfulvene [(cyclopentadienylidene)methanol] derivative (10-15%) and a substituted phenol (2-6%) as minor products.135 The proportion of reaction products is dependent on solvent, catalyst, and temperature. 

The major problem of these diazotizations is oxidation of the initial aminophenols by nitrous acid to the corresponding quinones. Easily oxidized amines, in particular aminonaphthols, are therefore commonly diazotized in a weakly acidic medium (pH 3, so-called neutral diazotization) or in the presence of zinc or copper salts. This process, which is due to Sandmeyer, is important in the manufacture of diazo components for metal complex dyes, in particular those derived from l-amino-2-naphthol-4-sulfonic acid. Kozlov and Volodarskii (1969) measured the rates of diazotization of l-amino-2-naphthol-4-sulfonic acid in the presence of one equivalent of 13 different sulfates, chlorides, and nitrates of di- and trivalent metal ions (Cu2+, Sn2+, Zn2+, Mg2+, Fe2 +, Fe3+, Al3+, etc.). The rates are first-order with respect to the added salts. The highest rate is that in the presence of Cu2+. The anions also have a catalytic effect (CuCl2 > Cu(N03)2 > CuS04). The mechanistic basis of this metal ion catalysis is not yet clear. 

With regard to the mechanism of these Pd°-catalyzed reactions, little is known in addition to what is shown in Scheme 10-62. In our opinion, the much higher yields with diazonium tetrafluoroborates compared with the chlorides and bromides, and the low yields and diazo tar formation in the one-pot method using arylamines and tert-butyl nitrites (Kikukawa et al., 1981 a) indicate a heterolytic mechanism for reactions under optimal conditions. The arylpalladium compound is probably a tetra-fluoroborate salt of the cation Ar-Pd+, which dissociates into Ar+ +Pd° before or after addition to the alkene. An aryldiazenido complex of Pd(PPh3)3 (10.25) was obtained together with its dediazoniation product, the corresponding arylpalladium complex 10.26, in the reaction of Scheme 10-64 by Yamashita et al. (1980). Aryldiazenido complexes with compounds of transition metals other than Pd are discussed in the context of metal complexes with diazo compounds (Zollinger, 1995, Sec. 10.1). 

Samsonova and Nikiforov, 1984), and porphyrin and phthalocyanine metal complexes (Becker et al., 1985a, 1986b Becker and Grossmann, 1990) were tested. That a series of relatively simple anions such as the oxalate monoanion, tetraphenyl bor-anate (Ph4B ), bromide, chloride, and even tetrafluoroborate can act as donors is, at least for the last mentioned anion, surprising, but Becker et al. (1985 b) were able to trap aryl radicals and in some cases also donor radicals (Cl, COO ) by spin trapping with nitrosodurene and phenyl-tert-butylnitrone. The photochemical effect is postulated to be due to ion pairs ArNJ X-. 

Reactions. The reduction of arylazoquinoxalines to quinoxalinamines has been covered in Section 6.3.1. The only other reaction reported recently is the formation of metal complexes. Although 6,6, 7,7 -tetraoctyloxy-2,2 -biquinoxaline and palladium chloride formed a complex (306) that proved too insoluble for analytical... 

---