Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Catalytic reactions addition

Figure 1 shows experimental reaction curves obtained in the absence of added catalyst and in the presence of various colloidal catalysts. The reaction has a pronounced induction period in the absence of added catalyst, and the curve shows the typical shape expected for an auto-catalytic reaction. Addition of colloidal silver, gold, palladium, and silver sulfide markedly decrease the magnitude of the induction period. [Pg.111]

Phosphine oxides are also solvents whose basic properties may be involved in catalytic reactions. Addition of HI or I2 to Ru3(CO)12 in phosphine oxide solvents gives catalyst solutions active for CO hydrogenation, but with remarkable selectivity and activity for ethanol production (193). Tri- -propylphosphine oxide [p BH —0.5 (45)] is a sufficiently strong base to promote the reduction of Ru3(CO)l2 under H2/CO according to the following reaction ... [Pg.398]

In a homogeneous catalytic reaction addition of external ligand changes the rate as [ligand] = 0.01, 0.005, 0.0033, and 0.0025 mmol/1, rate = 5, 10, 15, 20 mmol/(l, min). What will be the rate with a very large excess ( 1 mmol/ 1) of ligand ... [Pg.34]

The use of the new system at ambient pressure and at moderate temperatures allows to follow the reaction kinetics by analysing the concentration of educts and products as a function of time. Batch experiments showed that there is a marked induction period of slow reaction progress (Fig. 18.6) [22, 60, 63]. The systems exhibit the characteristics of an auto-catalytic reaction. Addition of new monomer up to the original starting concentration during the conversion of the monomer does not result in a new induction period but shortly after completion of the reaction the system answers to another addition of monomer with a new induction period [14, 64]. In steady state experiments the polymerization was proceeding over days with constant reaction rate, i. e. without decrease of the catalyst s activity. The re-... [Pg.357]

This goal might well be achieved by introducing an auxiliary that aids the coordination to the catalyst. After completion of the Diels-Alder reaction and removal of the auxiliary the desired adduct is obtained. This approach is summarised in Scheme 4.6. Some examples in which a temporary additional coordination site has been introduced to aid a catalytic reaction have been reported in the literature and are described in Section 4.2.1. Section 4.2.2 relates an attempt to use (2-pyridyl)hydrazone as coordinating auxiliary for the Lewis-acid catalysed Diels-Alder reaction. [Pg.111]

The most useful reaction of Pd is a catalytic reaction, which can be carried out with only a small amount of expensive Pd compounds. The catalytic cycle for the Pd(0) catalyst, which is understood by the combination of the aforementioned reactions, is possible by reductive elimination to generate Pd(0), The Pd(0) thus generated undergoes oxidative addition and starts another catalytic cycle. A Pd(0) catalytic species is also regenerated by /3-elimination to form Pd—H which is followed by the insertion of the alkene to start the new catalytic cycle. These relationships can be expressed as shown. [Pg.9]

As a typical example, the catalytic reaction of iodobenzene with methyl acrylate to afford methyl cinnamate (18) is explained by the sequences illustrated for the oxidative addition, insertion, and /3-elimination reactions. [Pg.9]

TT-Aliylpalladium chloride reacts with a soft carbon nucleophile such as mal-onate and acetoacetate in DMSO as a coordinating solvent, and facile carbon-carbon bond formation takes place[l2,265], This reaction constitutes the basis of both stoichiometric and catalytic 7r-allylpalladium chemistry. Depending on the way in which 7r-allylpalladium complexes are prepared, the reaction becomes stoichiometric or catalytic. Preparation of the 7r-allylpalladium complexes 298 by the oxidative addition of Pd(0) to various allylic compounds (esters, carbonates etc.), and their reactions with nucleophiles, are catalytic, because Pd(0) is regenerated after the reaction with the nucleophile, and reacts again with allylic compounds. These catalytic reactions are treated in Chapter 4, Section 2. On the other hand, the preparation of the 7r-allyl complexes 299 from alkenes requires Pd(II) salts. The subsequent reaction with the nucleophile forms Pd(0). The whole process consumes Pd(ll), and ends as a stoichiometric process, because the in situ reoxidation of Pd(0) is hardly attainable. These stoichiometric reactions are treated in this section. [Pg.61]

Several Pd(0) complexes are effective catalysts of a variety of reactions, and these catalytic reactions are particularly useful because they are catalytic without adding other oxidants and proceed with catalytic amounts of expensive Pd compounds. These reactions are treated in this chapter. Among many substrates used for the catalytic reactions, organic halides and allylic esters are two of the most widely used, and they undergo facile oxidative additions to Pd(0) to form complexes which have o-Pd—C bonds. These intermediate complexes undergo several different transformations. Regeneration of Pd(0) species in the final step makes the reaction catalytic. These reactions of organic halides except allylic halides are treated in Section 1 and the reactions of various allylic compounds are surveyed in Section 2. Catalytic reactions of dienes, alkynes. and alkenes are treated in other sections. These reactions offer unique methods for carbon-carbon bond formation, which are impossible by other means. [Pg.125]

In addition, a catalytic version of Tt-allylpalladium chemistry has been devel-oped[6,7]. Formation of the Tr-allylpalladium complexes by the oxidative addition of various allylic compounds to Pd(0) and subsequent reaction of the complex with soft carbon nucleophiles are the basis of catalytic allylation. After the reaction, Pd(0) is reformed, and undergoes oxidative addition to the allylic compounds again, making the reaction catalytic.-In addition to the soft carbon nucleophiles, hard carbon nucleophiles of organometallic compounds of main group metals are allylated with 7r-allylpalladium complexes. The reaction proceeds via transmetallation. These catalytic reactions are treated in this chapter. [Pg.290]

Mainly allylic esters are used as the substrates for the catalytic reactions. In addition, the allylic compounds shown are known to react with Pd(0) to form TT-allylpalladium complexes. Even allylic nitro compounds[8,9] and sul-fones[KM2] are used for the allylation. The reactivities of these allylic compounds arc very different. [Pg.291]

Furthermore, the catalytic allylation of malonate with optically active (S)-( )-3-acetoxy-l-phenyl-1-butene (4) yields the (S)-( )-malonates 7 and 8 in a ratio of 92 8. Thus overall retention is observed in the catalytic reaction[23]. The intermediate complex 6 is formed by inversion. Then in the catalytic reaction of (5 )-(Z)-3-acetoxy-l-phenyl-l-butene (9) with malonate, the oxidative addition generates the complex 10, which has the sterically disfavored anti form. Then the n-a ir rearrangement (rotation) of the complex 10 moves the Pd from front to the rear side to give the favored syn complex 6, which has the same configuration as that from the (5 )-( )-acetate 4. Finally the (S)-( )-mal-onates 7 and 8 are obtained in a ratio of 90 10. Thus the reaction of (Z)-acetate 9 proceeds by inversion, n-a-ir rearrangement and inversion of configuration accompanied by Z to isomerization[24]. [Pg.293]

Mercaptals, CH2CH(SR)2, are formed in a like manner by the addition of mercaptans. The formation of acetals by noncatalytic vapor-phase reactions of acetaldehyde and various alcohols at 35°C has been reported (67). Butadiene [106-99-0] can be made by the reaction of acetaldehyde and ethyl alcohol at temperatures above 300°C over a tantala—siUca catalyst (68). Aldol and crotonaldehyde are beheved to be intermediates. Butyl acetate [123-86-4] has been prepared by the catalytic reaction of acetaldehyde with 1-butanol [71-36-3] at 300°C (69). [Pg.51]

In addition to ready thermal decomposition, 1,2-dioxetanes are also rapidly decomposed by transition metals (39), amines, and electron-donor olefins (10). However, these catalytic reactions are not chemiluminescent as determined by the temperature drop kinetic method. [Pg.265]

Catalytic Properties. In zeoHtes, catalysis takes place preferentially within the intracrystaUine voids. Catalytic reactions are affected by aperture size and type of channel system, through which reactants and products must diffuse. Modification techniques include ion exchange, variation of Si/A1 ratio, hydrothermal dealumination or stabilization, which produces Lewis acidity, introduction of acidic groups such as bridging Si(OH)Al, which impart Briimsted acidity, and introducing dispersed metal phases such as noble metals. In addition, the zeoHte framework stmcture determines shape-selective effects. Several types have been demonstrated including reactant selectivity, product selectivity, and restricted transition-state selectivity (28). Nonshape-selective surface activity is observed on very small crystals, and it may be desirable to poison these sites selectively, eg, with bulky heterocycHc compounds unable to penetrate the channel apertures, or by surface sdation. [Pg.449]

Direct Chlorination of Ethylene. Direct chlorination of ethylene is generally conducted in Hquid EDC in a bubble column reactor. Ethylene and chlorine dissolve in the Hquid phase and combine in a homogeneous catalytic reaction to form EDC. Under typical process conditions, the reaction rate is controlled by mass transfer, with absorption of ethylene as the limiting factor (77). Ferric chloride is a highly selective and efficient catalyst for this reaction, and is widely used commercially (78). Ferric chloride and sodium chloride [7647-14-5] mixtures have also been utilized for the catalyst (79), as have tetrachloroferrate compounds, eg, ammonium tetrachloroferrate [24411-12-9] NH FeCl (80). The reaction most likely proceeds through an electrophilic addition mechanism, in which the catalyst first polarizes chlorine, as shown in equation 5. The polarized chlorine molecule then acts as an electrophilic reagent to attack the double bond of ethylene, thereby faciHtating chlorine addition (eq. 6) ... [Pg.417]

In addition to the catalytic reactions the resins may be cross-linked by agents which link across the epoxy molecules. These reactions may be via the epoxy ring or through the hydroxyl groups. Two examples of the former are ... [Pg.752]

Rubisco exists in three forms an inactive form designated E a carbamylated, but inactive, form designated EC and an active form, ECM, which is carbamylated and has Mg at its active sites as well. Carbamylation of rubisco takes place by addition of COg to its Lys ° e-NHg groups (to give e—NH—COO derivatives). The COg molecules used to carbamylate Lys residues do not become substrates. The carbamylation reaction is promoted by slightly alkaline pH (pH 8). Carbamylation of rubisco completes the formation of a binding site for the Mg that participates in the catalytic reaction. Once Mg binds to EC, rubisco achieves its active CM form. Activated rubisco displays a Ai, for CO2 of 10 to 20... [Pg.732]

The reverse reaction (formation of metal alkyls by addition of alkenes to M-H) is the basis of several important catalytic reactions such as alkene hydrogenation, hydroformylation, hydroboration, and isomerization. A good example of decomposition by y3-elimination is the first-order intramolecular reaction ... [Pg.926]

This class of substrate is the only real problematic substrate for the AE reaction. The enantioseleetivity of the AE reaction with this class of substrate is often variable. In addition, rates of the catalytic reactions are often sluggish, thus requiring stoichiometric loadings of Ti/tartrate. Some representative product epoxides from AE reaction of 3Z-substituted allyl alcohols are shown below. [Pg.55]

When naphthyl amines e.g. 23) are used in the Bucherer carbazole synthesis, they are converted by the catalytic action of aqueous bisulfite into tetralonesulfonic acid derivative 13 by the Bucherer reaction. Addition of NaHSOs gives an enamine, which tautomerises to the imine 24 24 is hydrolysed to keto form 13 and subsequent Bucherer carbazole synthesis follows to afford the benzocarbazole product 20. ... [Pg.112]

Catalytic enantioselective addition to imines, in particular, aza-Diels-Alder reaction 99CRV1069. [Pg.216]

A rather unexpected discovery was made in connection to these investigations [49]. When the 1,3-dipolar cycloaddition reaction of la with 19b mediated by catalyst 20 (X=I) was performed in the absence of MS 4 A a remarkable reversal of enantioselectivity was observed as the opposite enantiomer of ench-21 was obtained (Table 6.1, entries 1 and 2). This had not been observed for enantioselective catalytic reactions before and the role of molecular sieves cannot simply be ascribed to the removal of water by the MS, since the application of MS 4 A that were presaturated with water, also induced the reversal of enantioselectivity (Table 6.1, entries 3 and 4). Recently, Desimoni et al. also found that in addition to the presence of MS in the MgX2-Ph-BOX-catalyzed 1,3-dipolar addition shown in Scheme 6.17, the counter-ion for the magnesium catalyst also strongly affect the absolute stereoselectivity of the reac-... [Pg.224]

Heterogeneous catalytic systems offer the advantage that separation of the products from the catalyst is usually not a problem. The reacting fluid passes through a catalyst-filled reactor m the steady state, and the reaction products can be separated by standard methods. A recent innovation called catalytic distillation combines both the catalytic reaction and the separation process in the same vessel. This combination decreases the number of unit operations involved in a chemical process and has been used to make gasoline additives such as MTBE (methyl tertiai-y butyl ether). [Pg.226]


See other pages where Catalytic reactions addition is mentioned: [Pg.112]    [Pg.178]    [Pg.116]    [Pg.97]    [Pg.112]    [Pg.178]    [Pg.116]    [Pg.97]    [Pg.204]    [Pg.938]    [Pg.2709]    [Pg.4]    [Pg.6]    [Pg.8]    [Pg.16]    [Pg.37]    [Pg.516]    [Pg.311]    [Pg.48]    [Pg.177]    [Pg.249]    [Pg.601]    [Pg.223]    [Pg.51]    [Pg.129]    [Pg.232]    [Pg.126]    [Pg.288]    [Pg.1046]    [Pg.229]    [Pg.182]   
See also in sourсe #XX -- [ Pg.104 ]




SEARCH



Catalytic additives

© 2024 chempedia.info