Catalysts cycloaddition

Another conceptually unique approach in alkene aziridination has come from Johnston s labs. These workers shrewdly identified organic azides as nitrene equivalents when these compounds are in the amide anion/diazonium resonance form. Thus, when a range of azides were treated with triflic acid and methyl vinyl ketone at 0 °C, the corresponding aziridines were obtained, in synthetically useful yields. In the absence of the Bronsted acid catalyst, cycloaddition is observed, producing triazolines. The method may also be adapted, through the use of unsaturated imi-des as substrates, to give anti-aminooxazolidinones (Scheme 4.25) [32]. 

By palladium (O)-catalyzed carbonylation of l,2-diaza-l,3-buta-dienes. Boeckman et al. (01OL3651) (Scheme 42) reported that stable l-(l,2-diphenylethenyl)-2-phenyldiazene 180 when treated with 10 or 1 mol% of Pd(Ph3P)4 or Pd(dppe)2 catalysts, respectively, in toluene under 1 or 2 atm of carbon monoxide, at room temperature or 100 °C for 0.25-30 h, afforded pyrazol-3-one 184 in excellent yields. Although no intermediates were detected, by analogy to the previously studied cyclopalladation of azobenzene, the mechanism shown in Scheme 42 was proposed. The mechanism involves formation of a cr-complex 181 between 180 and Pd(0)-catalyst, cycloaddition by n—>-n isomerization to... 

Cycloaddition of COj with the dimethyl-substituted methylenecyclopropane 75 proceeds smoothly above 100 °C under pressure, yielding the five-membered ring lactone 76. The regiocheraistry of this reaction is different from that of above-mentioned diphenyl-substituted methylenecyclopropanes 66 and 67[61], This allylic lactone 76 is another source of trimethylenemethane when it is treated with Pd(0) catalyst coordinated by dppe in refluxing toluene to generate 77, and its reaction with aldehydes or ketones affords the 3-methylenetetrahy-drofuran derivative 78 as expected for this intermediate. Also, the lactone 76 reacts with a, /3-unsaturated carbonyl compounds. The reaction of coumarin (79) with 76 to give the chroman-2-one derivative 80 is an example[62]. 

The reaction of dihalocarbenes with isoprene yields exclusively the 1,2- (or 3,4-) addition product, eg, dichlorocarbene CI2C and isoprene react to give l,l-dichloro-2-methyl-2-vinylcyclopropane (63). The evidence for the presence of any 1,4 or much 3,4 addition is inconclusive (64). The cycloaddition reaction of l,l-dichloro-2,2-difluoroethylene to isoprene yields 1,2- and 3,4-cycloaddition products in a ratio of 5.4 1 (65). The main product is l,l-dichloro-2,2-difluoro-3-isopropenylcyclobutane, and the side product is l,l-dichloro-2,2-difluoro-3-methyl-3-vinylcyclobutane. When the dichlorocarbene is generated from CHCl plus aqueous base with a tertiary amine as a phase-transfer catalyst, the addition has a high selectivity that increases (for a series of diolefins) with a decrease in activity (66) (see Catalysis, phase-TRANSFEr). For isoprene, both mono-(l,2-) and diadducts (1,2- and 3,4-) could be obtained in various ratios depending on which amine is used. 

Cyclo ddltion. Ketenes are ideal components ia [2 + 2] cycloadditions for additions to the opposite sides of a TT-system as shown ia the cyclobutane product (2) ia Figure 1. Electron-rich double bonds react readily with ketenes, even at room temperature and without catalysts. In conjugated systems, ketenes add ia a [2 + 2] fashion. This is illustrated ia the reaction foUowiag, where the preferential orientation of L (large substituent) and S (small substituent) is seen (40). This reaction has been used ia the synthesis of tropolone [533-75-5]. 

Covalent fluondes of group 3 and group 5 elements (boron, tin, phosphorus, antimony, etc ) are widely used m organic synthesis as strong Lewis acids Boron trifluoride etherate is one of the most common reagents used to catalyze many organic reactions. A representative example is its recent application as a catalyst in the cycloadditions of 2-aza-l,3-dienes with different dienophiles [14] Boron trifluoride etherate and other fluonnated Lewis acids are effective activators of the... 

Cationic complexes of rran.s-chelating tridentate ligand, (/ ,/ )-4,6-dibenzo-furandiyl-2,2 -bis(4-phenyloxazoline), with transition metal(II) perchlorates as effective catalysts for asymmetric cycloaddition of nitrones 98YGK368. 

A versatile synthetic route to enantiomeric ally pure Diels-Alder adducts was deduced and found dependent on the application of enantiomerically pure 5-methoxy-174a (R=Me) and 5-(l-menthyloxy)-2(5//)-furanones 174b (R = menthyl), which were expected to undergo tt-face-selective cycloaddition with dienes. The reaction was effected by heating no Lewis acid catalysts were required (Scheme 55) (88JOC1127). 

Gothelf presents in Chapter 6 a comprehensive review of metal-catalyzed 1,3-di-polar cycloaddition reactions, with the focus on the properties of different chiral Lewis-acid complexes. The general properties of a chiral aqua complex are presented in the next chapter by Kanamasa, who focuses on 1,3-dipolar cycloaddition reactions of nitrones, nitronates, and diazo compounds. The use of this complex as a highly efficient catalyst for carbo-Diels-Alder reactions and conjugate additions is also described. 

Evans s bis(oxazolinyl)pyridine (pybox) complex 17, which is effective for the Diels-Alder reaction of a-bromoacrolein and methacrolein (Section 2.1), is also a suitable catalyst for the Diels-Alder reaction of acrylate dienophiles [23] (Scheme 1.33). In the presence of 5 mol% of the Cu((l )-pybox)(SbF5)2 catalyst with a benzyl substituent, tert-butyl acrylate reacts with cyclopentadiene to give the adduct in good optical purity (92% ee). Methyl acrylate and phenyl acrylate underwent cycloadditions with lower selectivities. 

The discovery of palladium trimethylenemethane (TMM) cycloadditions by Trost and Chan over two decades ago constitutes one of the significant advancements in ring-construction methodology [1]. In their seminal work it was shown that in the presence of a palladium(O) catalyst, 2-[(trimethylsilyl)methyl]-2-propen-l-yl acetate (1) generates a TMM-Pd intermediate (2) that serves as the all-carbon 1,3-di-pole. It was further demonstrated that (2) could be efficiently trapped by an electron-deficient olefin to give a methylenecyclopentane via a [3-1-2] cycloaddition (Eq. 1). 

Contrary to the expectation that a sulfur-containing substituent will be a catalyst poison, a phenylthio group serves as an effective selectivity control element in TMM cycloadditions. A single regioisomer (30) was obtained from the carbonate precursor (31) in good yield. The thermodynamically more stable sulfide (32) is readily accessible from (30) via a 1,3-sulfide shift catalyzed by PhSSPh. A wide array of synthetically useful intermediates could be prepared from the sulfides (30) and (32) with simple transformations (Scheme 2.10) [20]. 

Intramolecular cycloadditions of substrates with a cleavable tether have also been realized. Thus esters (37a-37d) provided the structurally interesting tricyclic lactones (38-43). It is interesting to note that the cyclododecenyl system (w = 7) proceeded at room temperature whereas all others required refluxing dioxane. In each case, the stereoselectivity with respect to the tether was excellent. As expected, the cyclohexenyl (n=l) and cycloheptenyl (n = 2) gave the syn adducts (38) and (39) almost exclusively. On the other hand, the cyclooctenyl (n = 3) and cyclododecenyl (n = 7) systems favored the anti adducts (41) and (42) instead. The formation of the endocyclic isomer (39, n=l) in the cyclohexenyl case can be explained by the isomerization of the initial adduct (44), which can not cyclize due to ring-strain, to the other 7t-allyl-Pd intermediate (45) which then ring-closes to (39) (Scheme 2.13) [20]. While the yields may not be spectacular, it is still remarkable that these reactions proceeded as well as they did since the substrates do contain another allylic ester moiety which is known to undergo ionization in the presence of the same palladium catalyst. 

The "acyl effect" proves crucial in the formation of the perhydroazulene systems cyclization can only take place with the presence of an acyl group on the TMM portion whereas the parent hydrocarbon fails. For example, treatment of substrate (51) with the palladium catalyst gave a mixture of the bicyclic compounds (52) and (53) in 51% yield. The formation of endocyclic olefin (52) is presumed to occur when the first formed (53) was exposed to silica gel during purification [22]. This intramolecular cycloaddition strategy was utilized in a highly diastereoselec-tive preparation of a key intermediate (54) in the total synthesis of (-)-isoclavuker-in A (55) (Scheme 2.16) [21]. 

The TMM [4-1-3] cycloaddition to pyrone has been employed in a synthetic study of a novel biologically active diterpene pseudolaric acid B (106), in which the formation of the bridged adduct (107) from the 2-pyrone (108) is the key step in the sequence (Scheme 2.29). A mixture of the other isomer (109) and the methylenecyclopentane (110) was also isolated from the reaction. It is important to point out that the presence of a tin co-catalyst is critical in effecting the reaction. This is the first example a "tin-effect observed in a [4-1-3] cycloaddition [40]. 

The main strategy for catalytic enantioselective cycloaddition reactions of carbonyl compounds is the use of a chiral Lewis acid catalyst. This approach is probably the most efficient and economic way to effect an enantioselective reaction, because it allows the direct formation of chiral compounds from achiral substrates under mild conditions and requires a sub-stoichiometric amount of chiral material. 

The catalytic enantioselective cycloaddition reaction of carbonyl compounds with conjugated dienes has been in intensive development in recent years with the main focus on synthetic aspects the number of mechanistic studies has been limited. This chapter will focus on the development and understanding of cycloaddition reactions of carbonyl compounds with chiral Lewis acid catalysts for the preparation of optically active six-membered ring systems. 

There have been few mechanistic studies of Lewis acid-catalyzed cycloaddition reactions with carbonyl compounds. Danishefsky et ah, for example, concluded that the reaction of benzaldehyde 1 with trans-l-methoxy-3-(trimethylsilyloxy)-l,3-di-methyl-1,3-butadiene (Danishefsky s diene) 2 in the presence of BF3 as the catalyst proceeds via a stepwise mechanism, whereas a concerted reaction occurs when ZnCl2 or lanthanides are used as catalysts (Scheme 4.3) [7]. The evidence of a change in the diastereochemistry of the reaction is that trans-3 is the major cycloaddition product in the Bp3-catalyzed reaction, whereas cis-3 is the major product in, for example, the ZnCl2-catalyzed reaction - the latter resulting from exo addition (Scheme 4.3). 

The reaction course of the cycloaddition reaction can also be dependent on the Lewis acid complex used as the catalyst. When the substrate contains an allylic C-H bond, both a cycloaddition and an ene reaction can occur. In the reaction of glyoxylate 4 with 2,3-dimethyl-l,3-butadiene 5 both the cycloaddition product 6... 

The [ 2 + 4]-cycloaddition reaction of aldehydes and ketones with 1,3-dienes is a well-established synthetic procedure for the preparation of dihydropyrans which are attractive substrates for the synthesis of carbohydrates and other natural products [2]. Carbonyl compounds are usually of limited reactivity in cycloaddition reactions with dienes, because only electron-deficient carbonyl groups, as in glyoxy-lates, chloral, ketomalonate, 1,2,3-triketones, and related compounds, react with dienes which have electron-donating groups. The use of Lewis acids as catalysts for cycloaddition reactions of carbonyl compounds has, however, led to a new era for this class of reactions in synthetic organic chemistry. In particular, the application of chiral Lewis acid catalysts has provided new opportunities for enantioselec-tive cycloadditions of carbonyl compounds. 

Some of the developments of catalytic enantioselective cycloaddition reactions of carbonyl compounds have origin in Diels-Alder chemistry, where many of the catalysts have been applied. This is valid for catalysts which enable monodentate coordination of the carbonyl functionality, such as the chiral aluminum and boron complexes. New chiral catalysts for cycloaddition reactions of carbonyl compounds have, however, also been developed. 

Yamamoto et al. were probably the first to report that chiral aluminum(III) catalysts are effective in the cycloaddition reactions of aldehydes [11]. The use of chiral BINOL-AlMe complexes (R)-S was found to be highly effective in the cycloaddition reaction of a variety of aldehydes with activated Danishefsky-type dienes. The reaction of benzaldehyde la with Danishefsky s diene 2a and traws-l-methoxy-2-methyl-3-(trimethylsilyloxy)-l,3-pentadiene 2b affords cis dihydropyrones, cis-3, as the major product in high yield with up to 97% ee (Scheme 4.6). The choice of the bulky triarylsilyl moiety in catalyst (J )-8b is crucial for high yield and the en-antioselectivity of the reaction in contrast with this the catalysts derived from AlMe3 and (J )-3,3 -disubstituted binaphthol (substituent = H, Me, Ph) were effective in stoichiometric amounts only and were less satisfactory with regard to reactivity and enantioselectivity. 

For the cycloaddition reaction in Scheme 4.6 it was found that 3-bromocam-phor, for example, can bind selectively to one enantiomer of the complex [12] and that if the reaction was performed in the presence of the racemic catalyst 8 and 3-bromocamphor, cis-3 was isolated with up to 80% ee compared to 95% ee for the reaction catalyzed by (J )-8b. 

---