Catalyst yield

Acyl halides are intermediates of the carbonylations of alkenes and organic-halides. Decarbonylation of acyl halides as a reversible process of the carbo-nylation is possible with Pd catalyst. The decarbonylation of aliphatic acid chlorides proceeds with Pd(0) catalyst, such as Pd on carbon or PdC, at around 200 °C[109,753]. The product is a mixture of isomeric internal alkenes. For example, when decanoyl chloride is heated with PdCF at 200 C in a distillation flask, rapid evolution of CO and HCl stops after I h, during which time a mixture of nonene isomers was distilled off in a high yield. The decarbonylation of phenylpropionyl chloride (883) affords styrene (53%). In addition, l,5-diphenyl-l-penten-3-one (884) is obtained as a byproduct (10%). formed by the insertion of styrene into the acyl chloride. Formation of the latter supports the formation of acylpalladium species as an intermediate of the decarbonylation. Decarbonylation of the benzoyl chloride 885 can be carried out in good yields at 360 with Pd on carbon as a catalyst, yielding the aryl chloride 886[754]. 

Dimerization is the main path. However, trimerization to form 1.3,6,10-dodecatetraene (15) takes place with certain Pd complexes in the absence of a phosphine ligand. The reaction in benzene at 50 C using 7r-allylpalladium acetate as a catalyst yielded 1,3,6,10-dodecatetraene (15) with a selectivity of 79% at a conversion of 30% based on butadiene in 22 h[ 19,20]. 1,3,7-Octatriene (7) is dimerized to 1,5,7,10.15-hexadecapentaene (16) with 70% selectivity by using bis-rr-allylpalladium. On the other hand. 9-allyl-l,4,6.12-tridecatetraene (17) is formed as the main product when PI13P is added in a 1 1. ratio[21]. 

Carbonylation of propargylic carbonates proceeds under mild neutral conditions (50 °C, I-10 atm) using Pd(OAc)2 and Ph ,P as a catalyst, yielding the 2,3-alkadienoates 18 in good yields[9,10]. The 2.3-alkadienoates isomerize to 2,4-dienoates during the reaction depending on the solvents and reaction time. 2-Decynyl methyl carbonate is converted into methyl 2-heptyl-2,3-butadienoate (19) in 82% yield. 

Entry Substituents Aromatic reactant Reagent, catalyst Yield" (%) Ref... 

Treatment of D mannose with methanol in the presence of an acid catalyst yields four iso menc products having the molecular formula C7H14O6 What are these four products ... 

Olefins add anhydrous acetic acid to give esters, usually of secondary or tertiary alcohols propjiene [115-07-1] yields isopropyl acetate [108-21-4], isobutjiene [115-11-7] gives tert-huty acetate [540-88-5]. Minute amounts of water inhibit the reaction. Unsaturated esters can be prepared by a combined oxidative esterification over a platinum group metal catalyst. Eor example, ethylene-air-acetic acid passed over a palladium—Hthium acetate catalyst yields vinyl acetate. 

The vapor-phase reduction of acrolein with isopropyl alcohol in the presence of a mixed metal oxide catalyst yields aHyl alcohol in a one-pass yield of 90.4%, with a selectivity (60) to the alcohol of 96.4%. Acrolein may also be selectively reduced to yield propionaldehyde by treatment with a variety of reducing reagents. 

Oxidation of a glycol can lead to a variety of products. Periodic acid quantitatively cleaves 1,2-glycols to aldehydes and is used as an analysis method for glycols (12,13). The oxidation of propylene glycol over Pd/C modified with Pb, Bi, or Te forms a mixture of lactic acid, hydroxyacetone, and pymvic acid (14). Air oxidation of propylene glycol using an electrolytic crystalline silver catalyst yields pymvic aldehyde. 

The first-stage catalysts for the oxidation to methacrolein are based on complex mixed metal oxides of molybdenum, bismuth, and iron, often with the addition of cobalt, nickel, antimony, tungsten, and an alkaU metal. Process optimization continues to be in the form of incremental improvements in catalyst yield and lifetime. Typically, a dilute stream, 5—10% of isobutylene tert-huty alcohol) in steam (10%) and air, is passed over the catalyst at 300—420°C. Conversion is often nearly quantitative, with selectivities to methacrolein ranging from 85% to better than 95% (114—118). Often there is accompanying selectivity to methacrylic acid of an additional 2—5%. A patent by Mitsui Toatsu Chemicals reports selectivity to methacrolein of better than 97% at conversions of 98.7% for a yield of methacrolein of nearly 96% (119). 

When dextrose is heated with methanol containing a small amount of anhydrous hydrogen chloride, a-methyl-D-glucoside is obtained in good yield and can be isolated by crystallization. Similar reactions occur with higher alcohols, but the reaction products are more difficult to isolate by crystallization. Dextrose reacts with acid anhydrides in the presence of basic catalysts, yielding esters. Complete reaction gives the pentaacylated derivative. 

Alkylation of isobutylene and isobutane in the presence of an acidic catalyst yields isooctane. This reaction proceeds through the same mechanism as dimerization except that during the last step, a proton is transferred from a surrounding alkane instead of one being abstracted by a base. The cation thus formed bonds with the base. Alkylation of aromatics with butylenes is another addition reaction and follows the same general rules with regard to relative rates and product stmcture. Thus 1- and 2-butenes yield j -butyl derivatives and isobutylene yields tert-huty derivatives. 

Hydrogenation at lower temperature and ia the presence of catalysts yields organic sulfur compounds. With a reduced nickel catalyst at 180°C, methanedithiol [6725-64-0] is formed ... 

Reactions of acetylene and iron carbonyls can yield benzene derivatives, quinones, cyclopentadienes, and a variety of heterocycHc compounds. The cyclization reaction is useful for preparing substituted benzenes. The reaction of / fZ-butylacetylene in the presence of Co2(CO)g as the catalyst yields l,2,4-tri-/ f2 butylbenzene (142). The reaction of Fe(CO) and diphenylacetylene yields no less than seven different species. A cyclobutadiene derivative [31811 -56-0] is the most important (143—145). 

An interesting development in the use of metal carbonyl catalysts is the production of hydrocarbons from carbon monoxide and hydrogen. The reaction of carbon monoxide and hydrogen in a molten solution of sodium chloride and aluminum chloride with It4(CO) 2 a catalyst yields a mixture of hydrocarbons. Ethane is the primary product (184). 

The unique advantage of the nickel system is that it can produce either stmctures of i7j -I,4-polybutadiene, /n j -I,4-polybutadiene, or a mixture of both depending on the reducing agent and the co-catalyst used. For example, chloride catalyst yields i7j -I,4-polybutadiene, whereas bromide or iodide yields /n j -I,4-polybutadiene. The counterion also has an effect on the polymer microstmcture. A 50/50 cis- 4l/n j -I,4-polybutadiene has been prepared using a carboxyhc counterion (95—105). 

A number of nonfused steroidal aziridines have been synthesized. The reduction of the azirine (118) over a platinum catalyst yields the spiro aziridine (119). Several aziridine derivatives of the type (120) have been... 

Reaction between Pyridine and W-7 Raney Nickel Catalysts Yields of 2,2 -Bipyridike and of Complex ... 

Olefins could he catalytically converted into shorter and longer-chain olefins through a catalytic disproportionation reaction. For example, propylene could he disproportionated over different catalysts, yielding ethylene and butylenes. Approximate reaction conditions are 400°C and 8 atmospheres ... 

The first step is the liquid phase addition of acetic acid to butadiene. The acetoxylation reaction occurs at approximately 80°C and 27 atmospheres over a Pd-Te catalyst system. The reaction favors the 1,4-addition product (l,4-diacetoxy-2-butene). Hydrogenation of diacetoxybutene at 80°C and 60 atmospheres over a Ni/Zn catalyst yields 1,4-diacetoxybu-tane. The latter compound is hydrolyzed to 1,4-butanediol and acetic acid ... 

Reaction of 2-methylpropene with CH3OH in the presence of H2SO4 catalyst yields methyl tert-butyl ether, CP OQCHT, by a mechanism analogous to that of acid-catalyzed alkene hydration. Write the mechanism, using curved arrows for each step. 

Alkynes can be reduced to yield alkenes and alkanes. Complete reduction of the triple bond over a palladium hydrogenation catalyst yields an alkane partial reduction by catalytic hydrogenation over a Lindlar catalyst yields a cis alkene. Reduction of (he alkyne with lithium in ammonia yields a trans alkene. 

We saw in Section 19.10 that treatment of a hemiacetal with an alcohol and an acid catalyst yields an acetal. 

Fischer s original method for conversion of the nitrile into an aldehyde involved hydrolysis to a carboxylic acid, ring closure to a cyclic ester (lactone), and subsequent reduction. A modern improvement is to reduce the nitrile over a palladium catalyst, yielding an imine intermediate that is hydrolyzed to an aldehyde. Note that the cyanohydrin is formed as a mixture of stereoisomers at the new chirality center, so two new aldoses, differing only in their stereochemistry at C2, Tesult from Kiliani-Fischer synthesis. Chain extension of D-arabinose, for example, yields a mixture of D-glucose and o-mannose. 

A detailed study of the dehydrogenation of 10.1 l-dihydro-5//-benz[6,/]azcpinc (47) over metal oxides at 550 C revealed that cobalt(II) oxide, iron(III) oxide and manganese(III) oxide are effective catalysts (yields 30-40%), but formation of 5//-dibenz[7),/]azepinc (48) is accompanied by ring contraction of the dihydro compound to 9-methylacridine and acridine in 3-20 % yield.111 In contrast, tin(IV) oxide, zinc(II) oxide. chromium(III) oxide, cerium(IV) oxide and magnesium oxide arc less-effective catalysts (7-14% yield) but provide pure 5H-dibenz[b,/]azepine. On the basis of these results, optimum conditions (83 88% selectivity 94-98 % yield) for the formation of the dibenzazepine are proposed which employ a K2CO,/ Mn203/Sn02/Mg0 catalyst (1 7 3 10) at 550 C. 

A number of approaches have been tried for modified halo-de-diazoniations using l-aryl-3,3-dialkyltriazenes, which form diazonium ions in an acid-catalyzed hydrolysis (see Sec. 13.4). Treatment of such triazenes with trimethylsilyl halides in acetonitrile at 60 °C resulted in the rapid evolution of nitrogen and in the formation of aryl halides (Ku and Barrio, 1981) without an electron transfer reagent or another catalyst. Yields with silyl bromide and with silyl iodide were 60-95%. The authors explain the reaction as shown in (Scheme 10-30). The formation of the intermediate is indicated by higher yields if electron-withdrawing substituents (X = CN, COCH3) are present. In the opinion of the present author, it is likely that the dissociation of this intermediate is not a concerted reaction, but that the dissociation of the A-aryl bond to form an aryl cation is followed by the addition of the halide. The reaction is therefore mechanistically not related to the homolytic halo-de-diazoniations. 

---