Catalysis elementary steps

ErtI G 1990 Elementary steps in heterogeneous catalysis Agnew. Chem., Int. Ed. Engl. 29 1219... 

In particular, reactions in heterogeneous catalysis are always a series of steps, including adsorption on the surface, reaction, and desorption back into the gas phase. In the course of this chapter we will see how the rate equations of overall reactions can be constructed from those of the elementary steps. 

Unraveling catalytic mechanisms in terms of elementary reactions and determining the kinetic parameters of such steps is at the heart of understanding catalytic reactions at the molecular level. As explained in Chapters 1 and 2, catalysis is a cyclic event that consists of elementary reaction steps. Hence, to determine the kinetics of a catalytic reaction mechanism, we need the kinetic parameters of these individual reaction steps. Unfortunately, these are rarely available. Here we discuss how sticking coefficients, activation energies and pre-exponential factors can be determined for elementary steps as adsorption, desorption, dissociation and recombination. 

Elementary steps in which a bond is broken form a particularly important class of reactions in catalysis. The essence of catalytic action is often that the catalyst activates a strong bond that cannot be broken in a direct reaction, but which is effectively weakened in the interaction with the surface, as we explained in Chapter 6. To monitor a dissociation reaction we need special techniques. Temperature-programmed desorption is an excellent tool for monitoring reactions in which products desorb. However, when the reaction products remain on the surface, one needs to employ different methods such as infrared spectroscopy or secondary-ion mass spectrometry (SIMS). 

D.A. Rudd, L.A. Apuvicio, J.E. Bekoske and A.A. Trevino, The Microkinetics of Heterogeneous Catalysis (1993), American Chemical Society, Washington DC]. Ideally, as many parameters as can be determined by surface science studies of adsorption and of elementary steps, as well as results from computational studies, are used as the input in a kinetic model, so that fitting of parameters, as employed in Section 7.2, can be avoided. We shall use the synthesis of ammonia as a worked example [P. Stoltze and J.K. Norskov, Phys. Rev. Lett. 55 (1985) 2502 J. Catal. 110 (1988) Ij. 

The SCR catalyst is considerably more complex than, for example, the metal catalysts we discussed earlier. Also, it is very difficult to perform surface science studies on these oxide surfaces. The nature of the active sites in the SCR catalyst has been probed by temperature-programmed desorption of NO and NH3 and by in situ infrared studies. This has led to a set of kinetic parameters (Tab. 10.7) that can describe NO conversion and NH3 slip (Fig. 10.16). The model gives a good fit to the experimental data over a wide range, is based on the physical reality of the SCR catalyst and its interactions with the reacting gases and is, therefore, preferable to a simple power rate law in which catalysis happens in a black box . Nevertheless, several questions remain unanswered, such as what are the elementary steps and what do the active site looks like on the atomic scale ... 

Keywords Elementary steps Homogeneous and heterogeneous catalysis ... 

Note that, while this reaction (as well as alkane hydrogenolysis) involves known elementary steps of molecular organometallic chemistry, it has not been discovered in homogeneous catalysis. One reason might be that highly... 

In the foregoing it has been discus.sed how a metal can dissociate H2. Fig. 3.6 explains the principle of catalysis with an example of the hydrogenation of ethylene, for which dissociative chemisorption of hydrogen is an elementary step in the catalytic cycle. The adsorption of alkenes, on the other hand, is non-dissociative. 

G. Ertl, Elementary steps in heterogeneous catalysis, Angew. Chem. Int. Ed., 1990, 29, 1219. 

This chapter reviews the recent progress in in situ STM studies of model catalysts. From revealing reaction pathways to delineating active sites, in situ STM studies in UHV and on extended surfaces have demonstrated their power to solve fundamental questions in catalysis and enhance our understanding of the elementary steps of... 

Surface Organometallic Chemistry for Study of the Elementary Steps in Heterogeneous Catalysis... 

During the catalytic cycle, surface intermediates include both the starting compounds and the surface metal atoms. This working site is a kind of supramolecule that has organometallic character, and, one hopes, the rules of the organometallic chemistry can be valid for this supramolecule. The synthesis of molecular models of these supramolecules makes it possible to study the elementary steps of the heterogeneous catalysis at a molecular level. Besides similarities there are, of course, also differences between the reactivity of a molecular species in solution and an immobilized species. For example, bimo-lecular pathways on surfaces are usually prohibited. 

Let us consider the basic enzyme catalysis mechanism described by the Michaelis-Menten equation (Eq. 2). It includes three elementary steps, namely, the reversible formation and breakdown of the ES complex (which does not mean that it is at equilibrium) and the decomposition of the ES complex into the product and the regenerated enzyme ... 

Infrared Measurements. Elementary-step models can be fit to transient gas-phase data (5) which are obtained by the methods described above. The models will then predict the surface intermediate concentration during transients and at steady state. It is clear that it is also important to observe these surface species experimentally, during transients as well as at steady state. Infrared spectroscopy can be used during catalysis in the presence of the gas phase, so it plays an important role in transient studies. 

Engle, T., and Ertl, G. Elementary steps in the catalytic oxidation of carbon monoxide on platinum metals. Advances in Catalysis. 28. New York Academic Press, Inc., New York. 1979. 

Central to catalysis is the notion of the catalytic site. It is defined as the catalytic center involved in the reaction steps, and, in Figure 8.1, is the molybdenum atom where the reactions take place. Since all catalytic centers are the same for molecular catalysts, the elementary steps are bimolecular or unimolecular steps with the same rate laws which characterize the homogeneous reactions in Chapter 7. However, if the reaction takes place in solution, the individual rate constants may depend on the nonreactive ligands and the solution composition in addition to temperature. 

The book presents a review of sixteen important topics in modem homogeneous catalysis. While the focus is on concepts, many key industrial processes and applications that are important in the laboratory synthesis of organic chemicals are used as real world examples. After an introduction to the field, the elementary steps needed for an understanding of the mechanistic aspects of the various catalytic reactions have been described. Chapter 3 gives the basics of kinetics, thus stressing that kinetics, so often neglected, is actually a key part of the foundation of catalysis. 

Heterogeneous catalysis is clearly a complex phenomenon to understand at the molecular level. Any catalytic transformation occurs through a sequence of elementary steps, any one of which may be rate controlling under different conditions of gas phase composition, pressure, or temperature. Furthermore, these elementary processes occur catalytically on surfaces that are usually poorly understood, particularly for mixed oxide catalysts. Even on metallic catalysts the reaction environment may produce surface compounds such as carbides, oxides, or sulfides which greatly modify... 

The combined use of the modem tools of surface science should allow one to understand many fundamental questions in catalysis, at least for metals. These tools afford the experimentalist with an abundance of information on surface structure, surface composition, surface electronic structure, reaction mechanism, and reaction rate parameters for elementary steps. In combination they yield direct information on the effects of surface structure and composition on heterogeneous reactivity or, more accurately, surface reactivity. Consequently, the origin of well-known effects in catalysis such as structure sensitivity, selective poisoning, ligand and ensemble effects in alloy catalysis, catalytic promotion, chemical specificity, volcano effects, to name just a few, should be subject to study via surface science. In addition, mechanistic and kinetic studies can yield information helpful in unraveling results obtained in flow reactors under greatly different operating conditions. 

The third and last part of the book (Chapters 12-16) deals with zeolite catalysis. Chapter 12 gives an overview of the various reactions which have been catalyzed by zeolites, serving to set the reader up for in-depth discussions on individual topics in Chapters 13-16. The main focus is on reactions of hydrocarbons catalyzed by zeolites, with some sections on oxidation catalysis. The literature review is drawn from both the patent and open literature and is presented primarily in table format. Brief notes about commonly used zeolites are provided prior to each table for each reaction type. Zeolite catalysis mechanisms are postulated in Chapter 13. The discussion includes the governing principles of performance parameters like adsorption, diffusion, acidity and how these parameters fundamentally influence zeolite catalysis. Brief descriptions of the elementary steps of hydrocarbon conversion over zeolites are also given. The intent is not to have an extensive review of the field of zeolite catalysis, but to select a sufficiently large subset of published literature through which key points can be made about reaction mechanisms and zeolitic requirements. 

In fact, the chemical industry often favors heterogeneous catalysis, which is also more than a century old (Sabatier was probably one of its real fathers), despite its so-far empirical nature. The development of better catalysts in heterogeneous catalysis has always relied on empirical improvement since it has been difficult to characterize active sites on the surfaces, as the so-called active sites are usually small in number(s). Presently, the number of accepted elementary steps (as defined above) is stiU Hmited to a few examples, mostly demonstrated by means of surface science [1-3] and the predictive approach, based on molecular concepts. 

Heterogeneous catalysis is primarily a molecular phenomenon since chemical bonds are created and/or broken (between the molecule and the surface) this implies that surface organometallic fragments are intermediates in any catalytic reaction on a surface. If one can design and synthesize surface organometallic fragments and study their reachvity, especially elementary steps, then one possesses in principle a crihcal tool to better understand the mechanisms of heterogeneous catalysis. 

In stark contrast to the transport considerations, typical time-scales for elementary and non-elementary steps in organometallic chemistry and homogeneous catalysis range from vibrational motions of ca. 10 s or less [44], to ca. hours or even days for the formation of products and side products. Moreover, the three pri-... 

Scheme 2.3-1 demonstrates the hierarchy of selected questions to elucidate the controlling factors in the elementary steps of catalysis. With this scheme we would like to point to the fact, that it is necessary to distinguish various possibilities of property... 

---