Silylations carbonyl compounds

Studies on the electrochemical oxidation of silyl-substituted ethers have uncovered a rich variety of synthetic application in recent years. Since acetals, the products of the anodic oxidation in the presence of alcohols, are readily hydrolyzed to carbonyl compounds, silyl-substituted ethers can be utilized as efficient precursors of carbonyl compounds. If we consider the synthetic application of the electrooxidation of silyl-substituted ethers, the first question which must be solved is how we synthesize ethers having a silyl group at the carbon adjacent to the oxygen. We can consider either the formation of the C-C bond (Scheme 15a) or the formation of the C-O bond (Scheme 15b). The formation of the C Si bond is also effective, but this method does not seem to be useful from a view point of organic synthesis because the required starting materials are carbonyl compounds. 

Preparation of alkylidene cyclopropanes is feasible by alkylation of lithium carbenoids followed by base-promoted elimination (equation 13or by addition of carbonyl compounds, silylation and reductive elimination (equation 132). Similarities with the chemistry displayed by sulphur-substituted cyclopropanes (Section VI.D.l) are obvious. 

Much attention has been devoted to the conversion of aldehydes into the trimethylsilyl ethers of (a-hydroxyalkyl)-phosphonic acids 210 or analogous -phosphinic acids, or of the corresponding (a-hydroxyalkyl)phosphonic diamides 211 by the use of dialkyl trimethylsilyl phosphite or Me3SiOP(NEt2)2 (or other phosphorodiamidite) It is a reaction which occurs very readily, even at room temperature, and the ready methanolytic or hydrolytic removal of the silyl protecting group makes the procedure an attractive alternative to the direct synthesis of the (a-hydroxyalkyl)phosphonic acids from dialkyl hydrogenphosphonates and carbonyl compounds. Silyl-protected hydroxy-phosphonic and -phosphinic acid derivatives are useful for further synthetic development. ... 

Sometimes the products of carbonyl compounds silylation are not TMS-enols, but bis-TMS derivatives of hydrated carbonyls, RR C = 0 RR C(OH)2 RR C(OTMS)2. More unpredictable products can be formed during silylation of a-ketocarboxylic acids. For example, ketomalonic acid (II) besides the normal bis-JMS ester gives an unusual TMS derivative of the enol-hydrate form (see Fig. 7). 

Preparation of o,/3-Unsaturated Carbonyl Compounds by the Reactions of Silyl Enol Ethers and Enol Acetates with Ally Carbonates... 

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

Titanium(IV) is a powerful but selective Lewis acid which can promote the coupling of allylsilanes with carbonyl compounds and derivatives In the presence of titanium tetrachlonde, benzalacetone reacts with allyltnmethylsilane by 1,4-addition to give 4-PHENYL-6-HEPTEN-2-ONE. Similarly, the enol silyl ether of cyclopentanone is coupled with f-pentyl chloride using titanium tetrachlonde to give 2-(tert-PENTYL)CYCLOPENTANONE, an example of a-tert-alkylation of ketones. 

Fluoroalkyl ketones may be used as the electrophilic partners in condensation reactions with other carbonyl compounds The highly electrophilic hexafluo-roacetone has been used in selective hexafluoroisopropyhdenation reactions with enol silyl ethers and dienolsilyl ethers [f] (equation 1)... 

The fluoride anion has a pronounced catalytic effect on the aldol reaction between enol silyl ethers and carbonyl compounds [13] This reacbon proceeds at low temperature under the influence of catalytic amounts (5-10 mol %) of tetra-butylammonium fluoride, giving the aldol silyl ethers in high yields (equation 11). 

The basc-eatalyzcd addition of nilroalkancs to carbonyl compounds is a reversible reaction and proceeds under thermodynamic control. Thus low (R, R )/(R, S ) selectivities arc observed in the classical Henry reaction which leads to the silylated x-nitro alcohols 2. 

These silanes, especially when trimethylsilyl, as is normally the case, undergo a facile solvolytic loss of the silyl group to give the parent carbonyl compound. 

Kuwajima (75) has provided full details of the regiospecific monoalkylation of carbonyl compounds via their silyl enol ethers, using stoichiometric amounts of fluoride ion. Noyori (76) has given more information on the use of the complex fluoride source (2) (Chapter 18)... 

This area of reactivity has been the subject of excellent reviews (J5). Silyl enol ethers are not sufficiently nucleophilic to react spontaneously with carbonyl compounds they do so under the influence of either Lewis acids or fluoride ion, as detailed above. Few clear trends have emerged from the somewhat limited number of definitive studies reported so far, with ambiguities in diastereoisomeric assignments occasionally complicating the issue even further. 

Rhodium-catalysed addition (10) of hydridosilanes (Chapter 17) to a/3-unsaturated carbonyl compounds can be performed regioselectively, to afford either the product of 1,2-addition, or, perhaps more usefully, that of 1,4-addition, i.e. the corresponding silyl enol ether this latter process is an excellent method for the regiospecific generation of silyl enol ethers. Of all catalyst systems investigated, tris(triphenylphosphine)rhodium(l) chloride proved to be the best. 

The use of the enolsilyl ether of 1-menthone [16, 19, 21-23] and of some free triflic acid favors the formation of the thermodynamically controlled products as with free 2,2 -dihydroxydiphenyl [22] and only subsequently added HMDS 2 [22]. On reacting silylated alcohols and carbonyl compounds with pure trimethylsilyl triflate 20 under strictly anhydrous conditions no conversion to acetals is observed [24]. Apparently, only addition of minor amounts of humidity to hydrolyze TMSOTf 20 to the much stronger free triflic acid and hexamethyldisiloxane 7 or addition of traces of free triflic acid [18-21, 24, 26] or HCIO4 [25] leads to formation of acetals. 

Because of the equilibrium between silylated alcohols and free carbonyl compounds, the reaction between silylated alcohols ROSiMe3 13 and free enolized 1,2-dicarbonyl compounds such as 403 in the presence of 1% CF3SO3H results, at... 

The diacetal 629, prepared from the carbonyl compound and O-silylated allylic alcohols in the presence of TMSOTf 20, reacts with ( )-l-trimethylsilyl-2,4-penta-diene 630, in the presence of TMSOTf 20 in CH2CI2 at -78°C, to afford 60% 631 this undergoes Diels-Alder-cyclization at 170 °C in toluene to give a substituted... 

P 55] Before synthesis, a micro-mixing tee chip micro reactor (Figure 4.85) (with two mixing tees and four reservoirs) was primed with anhydrous tetrahydrofuran (THF). A 40 gl volume of a 0.1 M solution of tetrabutylammonium fluoride trihydrate in anhydrous THF is filled into one reservoir of a micro-mixing tee chip reactor [15], 40 gl of a 0.1 M solution of 4-bromobenzaldehyde in anhydrous THF is added to a second reservoir, 40 gl of a 0.1 M solution of the silyl enol ether (masking the enolate of a carbonyl compound such as cyclohexanone) in anhydrous THF is added to a third reservoir and anhydrous TH F is filled into the fourth collection reservoir. Electrical fields of417,455,476 and 0 V cm are applied to transport the reaction species from the respective reservoirs. The reaction is carried out at room temperature. 

Scheme 2.9 Hydrosilylation of carbonyl compounds to silyl ethers...

The hydrosilylation of carbonyl compounds by EtjSiH catalysed by the copper NHC complexes 65 and 66-67 constitutes a convenient method for the direct synthesis of silyl-protected alcohols (silyl ethers). The catalysts can be generated in situ from the corresponding imidazolium salts, base and CuCl or [Cu(MeCN) ]X", respectively. The catalytic reactions usually occur at room tanperature in THE with very good conversions and exhibit good functional group tolerance. Complex 66, which is more active than 65, allows the reactions to be run under lower silane loadings and is preferred for the hydrosilylation of hindered ketones. The wide scope of application of the copper catalyst [dialkyl-, arylalkyl-ketones, aldehydes (even enoUsable) and esters] is evident from some examples compiled in Table 2.3 [51-53],... 

The enolates of other carbonyl compounds can be used in mixed aldol reactions. Extensive use has been made of the enolates of esters, thiol esters, amides, and imides, including several that serve as chiral auxiliaries. The methods for formation of these enolates are similar to those for ketones. Lithium, boron, titanium, and tin derivatives have all been widely used. The silyl ethers of ester enolates, which are called silyl ketene acetals, show reactivity that is analogous to silyl enol ethers and are covalent equivalents of ester enolates. The silyl thioketene acetal derivatives of thiol esters are also useful. The reactions of these enolate equivalents are discussed in Section 2.1.4. 

There are several procedures for reductive condensation of silyl ethers with carbonyl compounds to form ethers. One method uses TMSOTf as the catalyst.180... 

Various other Lewis acids have been explored as catalysts, and the combination InCl3-(CH3)3SiCl has been found to be effective.88 The catalysis requires both components and is attributed to assistance from O-silylation of the carbonyl compound. 

Silyl enol ethers and silyl ketene acetals also offer both enhanced reactivity and a favorable termination step. Electrophilic attack is followed by desilylation to give an a-substituted carbonyl compound. The carbocations can be generated from tertiary chlorides and a Lewis acid, such as TiCl4. This reaction provides a method for introducing tertiary alkyl groups a to a carbonyl, a transformation that cannot be achieved by base-catalyzed alkylation because of the strong tendency for tertiary halides to undergo elimination. 

The crossed aldol reaction of silyl enol ethers with carbonyl compounds (Mukaiyama-aldol) was studied by Lubineau and co-workers... 

This reaction sequence of conjugate reduction followed by aldol reaction is known as the reductive aldol reaction. In certain instances, reductive elimination from the M-TM-enolate species may occur to furnish M-enolate, which itself may participate in the aldol reaction (Scheme 3). This detour may be described as the background path or stepwise path in one-pot. Indeed, it has been reported that certain cationic Rh complexes such as [Rh(COD)(DPPB)] (COD = 1,5-cyclooctadiene, DPPB = diphenylphosphinobutane) catalyze the aldol reactions of silyl enol ethers and carbonyl compounds by serving as Lewis acids [5-8]. 

The mechanism of this transformation is a matter of debate, and may vary with the structure of the heteroanalogous carbonyl compound employed. Although a Diels-Alder-type process is conceivable [246], a Lewis acid-induced addition of the silyl enol ether moiety in 2-453 followed by a cyclizahon through a nucleophilic intramolecular attack of the amine and subsequent elimination of methanol is assumed in this case [247]. 

As discussed in Chapter 9, various nucleophiles can be introduced at the ortho position of nitroarenes via the VNS process. This provides a useful strategy for the synthesis of indoles. One of the most attractive and general methods of indoles and indolinones would be the reductive cyclization of a-nitroaryl carbonyl compounds (Eq. 10.54). The VNS and related reactions afford a-nitroaryl carbonyl compounds by a simple procedure. For example, alkylation of 4-fluoronitrobenzene with a lactone silyl enol ether followed by reductive cyclization leads to tryptophols (Eq. 10.55).73... 

---