Acetals enol ethers from

In 1959 Carboni and Lindsay first reported the cycloaddition reaction between 1,2,4,5-tetrazines and alkynes or alkenes (59JA4342) and this reaction type has become a useful synthetic approach to pyridazines. In general, the reaction proceeds between 1,2,4,5-tetrazines with strongly electrophilic substituents at positions 3 and 6 (alkoxycarbonyl, carboxamido, trifluoromethyl, aryl, heteroaryl, etc.) and a variety of alkenes and alkynes, enol ethers, ketene acetals, enol esters, enamines (78HC(33)1073) or even with aldehydes and ketones (79JOC629). With alkenes 1,4-dihydropyridazines (172) are first formed, which in most cases are not isolated but are oxidized further to pyridazines (173). These are obtained directly from alkynes which are, however, less reactive in these cycloaddition reactions. In general, the overall reaction which is presented in Scheme 96 is strongly... 

For those substrates more susceptible to nucleophilic attack (e.g., polyhalo alkenes and alkenes of the type C=C—Z), it is better to carry out the reaction in basic solution, where the attacking species is RO . The reactions with C=C—Z are of the Michael type, and OR goes to the side away from the Z. Since triple bonds are more susceptible to nucleophilic attack than double bonds, it might be expected that bases would catalyze addition to triple bonds particularly well. This is the case, and enol ethers and acetals can be produced by this reaction. Because enol ethers are more susceptible than triple bonds to electrophilic attack, the addition of alcohols to enol ethers can also be catalyzed by acids. " One utilization of this reaction involves the compound dihydropyran... 

It is not customary to attempt the isolation of ketone or aldehyde intermediates (121) the formula serves merely as a reminder that once hydrolysis of the protecting enol ether or acetal occurs, the same type of structure is formed from any given dicarbonyl compound. Cyclization has been carried out in refluxing ethanolic picric acid or acetic anhydride with a few drops of sulfuric acid, but Hansen and Amstutz (63JOC393) offered excellent theoretical reasons for avoiding an excess of acid, and reported that best results (Table 3) can be obtained by refluxing the dry hydrobromide in acetic anhydride containing no sulfuric acid. 

Garbisch (1965) explained predominant bromination (67%) on the methylene site of 2-methylcyclohexanone 1681 (6-position) in methanol (as opposed to 4% in ether) as due to easier formation of the more stable /F,6-enol ether from the acetal. Similar peculiar regioselectivities for acid-catalysed bromination, chlorination and deuteriation of [691-1731 have been reported... 

The other side of the coin is that the S 2 reaction at carbon is not much affected by partial positive [ charge (5+) on the carbon a tom. The Sn2 reaction at silicon is affected by the charge on silicon. The r most electrophilic silicon compounds are the silyl triflates and it is estimated that they react some 108-109 times faster with oxygen nucleophiles than do silyl chlorides. Trimethylsilyl triflate is, in fact, an excellent Lewis acid and can be used to form acetals or silyl enol ethers from carbonyl compounds, and to react these two together in aldol-style reactions. In all three reactions the triflate attacks an oxygen atom. 

As with other intramolecular ene reactions, this reaction is best suited to the preparation of cyclopentanes, but can also be used for the preparation of cyclohexanes. The reaction cannot be used for the formation of cyclopropanes or cyclobutanes since the unsaturated carbonyl compound is more stable than the ene adduct. 8,e-Unsaturated ketones (167) do not give cyclobutanes (171) by enolization to give (170) followed by a type I reaction but instead give cyclohexanones (169) by enolization to give (168) followed by a type II reaction. Alkynes can replace alkenes as the enophile. Enols can be prepared from pyrolysis of enol esters, enol ethers and acetals and from -keto esters and 1,3-dicaibonyl compounds. Tlie reaction is well suited to the preparation of fused or bridged bicyclic and spirocyclic compounds. Tandem ene reactions in which two rings are formed in one pot from dienones have also been described. The examples discussed below 2-i63 restricted to those published since Conia and Le Perchec s 1975... 

Finally, this cobalt catalyst system has been shown to be useful for the preparation of silyl enol ethers from alkyl acetates (equation 126)337,338. 

A mixture of cis- and truns-1-methoxycyclododecenes was prepared in 98% yield from cyclododecanone by a modification of Claison s method of ketal formation. Amberlyst-15 is a superior catalyst for the preparation of enol ethers and acetals. 

Silyl enol ethers are other ketone or aldehyde enolate equivalents and react with allyl carbonate to give allyl ketones or aldehydes 13,300. The transme-tallation of the 7r-allylpalladium methoxide, formed from allyl alkyl carbonate, with the silyl enol ether 464 forms the palladium enolate 465, which undergoes reductive elimination to afford the allyl ketone or aldehyde 466. For this reaction, neither fluoride anion nor a Lewis acid is necessary for the activation of silyl enol ethers. The reaction also proceed.s with metallic Pd supported on silica by a special method[301j. The ketene silyl acetal 467 derived from esters or lactones also reacts with allyl carbonates, affording allylated esters or lactones by using dppe as a ligand[302]... 

Another preparative method for the enone 554 is the reaction of the enol acetate 553 with allyl methyl carbonate using a bimetallic catalyst of Pd and Tin methoxide[354,358]. The enone formation is competitive with the allylation reaction (see Section 2.4.1). MeCN as a solvent and a low Pd to ligand ratio favor enone formation. Two regioisomeric steroidal dienones, 558 and 559, are prepared regioselectively from the respective dienol acetates 556 and 557 formed from the steroidal a, /3-unsaturated ketone 555. Enone formation from both silyl enol ethers and enol acetates proceeds via 7r-allylpalladium enolates as common intermediates. 

The cyclic enol ether 255 from the functionalized 3-alkynoI 254 was converted into the furans 256 by the reaction of allyl chloride, and 257 by elimination of MeOH[132], The alkynes 258 and 260, which have two hydroxy groups at suitable positions, are converted into the cyclic acetals 259 and 261. Carcogran and frontalin have been prepared by this reaction[124]. 

Although ethereal solutions of methyl lithium may be prepared by the reaction of lithium wire with either methyl iodide or methyl bromide in ether solution, the molar equivalent of lithium iodide or lithium bromide formed in these reactions remains in solution and forms, in part, a complex with the methyllithium. Certain of the ethereal solutions of methyl 1ithium currently marketed by several suppliers including Alfa Products, Morton/Thiokol, Inc., Aldrich Chemical Company, and Lithium Corporation of America, Inc., have been prepared from methyl bromide and contain a full molar equivalent of lithium bromide. In several applications such as the use of methyllithium to prepare lithium dimethyl cuprate or the use of methyllithium in 1,2-dimethyoxyethane to prepare lithium enolates from enol acetates or triraethyl silyl enol ethers, the presence of this lithium salt interferes with the titration and use of methyllithium. There is also evidence which indicates that the stereochemistry observed during addition of methyllithium to carbonyl compounds may be influenced significantly by the presence of a lithium salt in the reaction solution. For these reasons it is often desirable to have ethereal solutions... 

The crude ketal from the Birch reduction is dissolved in a mixture of 700 ml ethyl acetate, 1260 ml absolute ethanol and 31.5 ml water. To this solution is added 198 ml of 0.01 Mp-toluenesulfonic acid in absolute ethanol. (Methanol cannot be substituted for the ethanol nor can denatured ethanol containing methanol be used. In the presence of methanol, the diethyl ketal forms the mixed methyl ethyl ketal at C-17 and this mixed ketal hydrolyzes at a much slower rate than does the diethyl ketal.) The mixture is stirred at room temperature under nitrogen for 10 min and 56 ml of 10% potassium bicarbonate solution is added to neutralize the toluenesulfonic acid. The organic solvents are removed in a rotary vacuum evaporator and water is added as the organic solvents distill. When all of the organic solvents have been distilled, the granular precipitate of 1,4-dihydroestrone 3- methyl ether is collected on a filter and washed well with cold water. The solid is sucked dry and is dissolved in 800 ml of methyl ethyl ketone. To this solution is added 1600 ml of 1 1 methanol-water mixture and the resulting mixture is cooled in an ice bath for 1 hr. The solid is collected, rinsed with cold methanol-water (1 1), air-dried, and finally dried in a vacuum oven at 60° yield, 71.5 g (81 % based on estrone methyl ether actually carried into the Birch reduction as the ketal) mp 139-141°, reported mp 141-141.5°. The material has an enol ether assay of 99%, a residual aromatics content of 0.6% and a 19-norandrost-5(10)-ene-3,17-dione content of 0.5% (from hydrolysis of the 3-enol ether). It contains less than 0.1 % of 17-ol and only a trace of ketal formed by addition of ethanol to the 3-enol ether. 

Enol ethers (15) and mixed acetals (16) are readily obtained from secondary but not from tertiary alcohols, whereas tetrahydropyranyl ethers can be formed even from tertiary alcohols. This is a result of the greater steric requirements of the reagents (17) and (18) as compared to (19). 

Symmetrical labile ethers such as cycloalkenyl ethers (15) or mixed acetals (16) can also be prepared from the 3-hydroxyl group by acid-catalyzed exchange etherification or by acid-catalyzed addition to cyclohexanone methyl enol ether. 

The tertiary 17) -hydroxyl group does not form bulky enol ethers and mixed acetals. However, tetrahydropyranyl ethers are obtained from 17a-ethynyl-17]3-hydroxy compounds. Tetrahydropyranyl ethers have also been prepared from tertiary 17a-hydroxyl groups. ... 

---