Carbonates, liquid electrolytes

Replacement of the organic carbonate liquid electrolyte solutions with safer and more reliable electrolyte systems. 

Carbon nanotubes mixed with ruthenium oxide powder, and immersed in a liquid electrolyte, have been shown by a Chinese research group to function as supercapacilors with much larger capacitance per unit volume than is normally accessible (Ma et al. 2000). 

Film-forming chemical reactions and the chemical composition of the film formed on lithium in nonaqueous aprotic liquid electrolytes are reviewed by Dominey [7], SEI formation on carbon and graphite anodes in liquid electrolytes has been reviewed by Dahn et al. [8], In addition to the evolution of new systems, new techniques have recently been adapted to the study of the electrode surface and the chemical and physical properties of the SEI. The most important of these are X-ray photoelectron spectroscopy (XPS), SEM, X-ray diffraction (XRD), Raman spectroscopy, scanning tunneling microscopy (STM), energy-dispersive X-ray spectroscopy (EDS), FTIR, NMR, EPR, calorimetry, DSC, TGA, use of quartz-crystal microbalance (QCMB) and atomic force microscopy (AFM). 

Of course these requirements cannot be fulfilled simultaneously. For example, a low vapor pressure of the liquid electrolyte is obtained only by using more viscous dipolar aprotic solvents such as propylene carbonate, but high solvent viscosity generally entails a low conductivity. Nevertheless, a large number of useful solvents and electrolytes is available, allowing a sufficiently good approximation to an ideal electrolyte. 

The preparation and properties of a novel, commercially viable Li-ion battery based on a gel electrolyte has recently been disclosed by Bellcore (USA) [124]. The technology has, to date, been licensed to six companies and full commercial production is imminent. The polymer membrane is a copolymer based on PVdF copolymerized with hexafluoropropylene (HFP). HFP helps to decrease the crystallinity of the PVdF component, enhancing its ability to absorb liquid. Optimizing the liquid absorption ability, mechanical strength, and processability requires optimized amorphous/crystalline-phase distribution. The PVdF-HFP membrane can absorb plasticizer up to 200 percent of its original volume, especially when a pore former (fumed silica) is added. The liquid electrolyte is typically a solution of LiPF6 in 2 1 ethylene carbonate dimethyl car-... 

The prototype DSCs used liquid electrolytes, typically L/I2 in an organic solvent such as propylene carbonate. The electron generation/collection problem in this cell has been discussed analytically with the help of intensity-modulated photocurrent and photovoltage spectroscopy [314]. A particularly challenging issue has been the replacement of the liquid electrolyte with a solid charge-transport material... 

The electrolyte was a solution of ammonium chloride that bathed the electrodes. Like Plante s electrochemistry of the lead-acid battery, Leclanche s electrochemistry survives until now in the form of zinc-carbon dry cells and the use of gelled electrolyte.12 In their original wet form, the Leclanche electrochemistry was neither portable nor practicable to the extent that several modifications were needed to make it practicable. This was achieved by an innovation made by J. A. Thiebaut in 1881, who through encapsulating both zinc cathode and electrolyte in a sealed cup avoided the leakage of the liquid electrolyte. Modern plastics, however, have made Leclanche s chemistry not only usable but also invaluable in some applications. For example, Polaroid s Polar Pulse disposable batteries used in instant film packs use Leclanche chemistry, albeit in a plastic sandwich instead of soup bowls.1... 

The evaluation of catalysts typically uses two techniques. The first is evaluation as a thin layer on a bulk electrode (e.g., glassy carbon) in dilute liquid electrolyte (e.g., H2 4) either as a static electrode or an RDE. In the study of oxygen reduction, there has been much discussion as to the most appropriate electrolyte to use. In general, dilute perchloric acid (HCIOJ is preferred because of its noncoordinating nature, it is thus closest to the environment foxmd within a FEM catalyst layer with perfluorosulfonic acid ionomer. A possible alternative is trifluoromethylsulfonic acid (CF3SO3H), which mimics perfluorosulfonic acids closely, but there are relatively few studies with this acid. Rotating... 

The mechanism of carbon corrosion has been investigated in MEAs and in liquid electrolytes. Carbon itself is thermodynamically unstable toward oxidation at higher potentials, but this oxidation is kinetically limited ... 

The PtRu bimetallic system has been the catalyst of choice for MeOH oxidation in acid elecfrolyfes since its discovery by workers at Shell in the early 1960s2 In practice, PtRu lowers the overpotential for MeOH oxidation by >200 mV compared to pure Pt. The MeOH oxidation reaction on Pt and PtRu is probably the most studied reaction in fuel cell electrocatalysis due to its ease of sfudy in liquid electrolytes and the many possible mechanistic pathways. In recent years, the deposition of PtRu particles onto novel carbon supports and the novel PtRu particle preparation routes have proved popular as a means to demonstrate superiority over conventional PtRu catalysts. 

Besides silicon, other materials have also been used in micro fuel cells. Cha et al. [79] made micro-FF channels on SU8 sheets—a photosensitive polymer that is flexible, easy to fabricate, thin, and cheaper than silicon wafers. On top of fhe flow channels, for both the anode and cathode, a paste of carbon black and PTFE is deposited in order to form the actual diffusion layers of the fuel cell. Mifrovski, Elliott, and Nuzzo [80] used a gas-permeable elastomer, such as poly(dimethylsiloxane) (PDMS), as a diffusion layer (with platinum electrodes embedded in it) for liquid-electrolyte-based micro-PEM fuel cells. 

Various types of fuel cells have been developed to generate power according to the applications and load requirements (Chaurasia, 2000). There are several types of electrolyte, which plays a key role in the different types of fuel cells. It must permit only the appropriate ions to pass between the anode and cathode. The main electrolyte types are alkali, molten carbonate, phosphoric acid, proton exchange membrane (PEM), and solid oxide. The first three are liquid electrolytes, the last two are solids. 

The process is characterised by the electrofluorination of volatile organic substrates within the matrix of pores of a carbon anode immersed in molten KF 2HF as electrolyte (as in a mid-temperature fluorine generator cell), and depends on the phenomenon that the anodically charged porous carbon is not wetted by the electrolyte. The fluorination probably takes place at the three phase interface of organic vapour, solid carbon, and liquid electrolyte in close proximity to, or at the sites where fluorine is being evolved. 

Gelation of liquid electrolytes to obtain a gel that effectively penetrates into the pores of the 2 can be obtained by addition of appropriate additives such as small molecules,49 polymers, inorganic nanoparticles,49 50 and carbon nanotubes.51... 

Carbon powder mixed with polymeric binder (PVdF, PTFE) has been widely used as anode material for lithium ion batteries and as the electrode material for EDLC with liquid electrolyte solutions. When such composite electrodes composed of carbon powder and polymer binder were used in all-solid-state EDLC, the performance was not good enough because of poor electrical contact between the electrode s active mass and the electrolyte. By having the electrolyte inside the composite electrode, the contact between the active mass in the electrode and the electrolyte can be considerably improved and hence the capacitance can... 

As already mentioned, salt-containing liquid solvents are typically used as electrolytes. The most prominent example is LiPF6 as a conductive salt, dissolved in a 1 1 mixture of ethylene carbonate (EC) and dimethyl carbonate (DMC) as 1 molar solution. It should be mentioned that this electrolyte is not thermodynamically stable in contact with lithium or, for example, LiC6. Its success comes from the fact that it forms an extremely stable passivation layer on top of the electrode, the so-called solid-electrolyte interface (SEI) [35], Key properties of such SEI layers are high Li+ and very low e conductivity - that is, they act as additional electrolyte films, where the electrode potential drops to a level the liquid electrolyte can withstand [36],... 

---