Carbon multiwalled CNTs

In view of the conductive and electrocatalytic features of carbon nanotubes (CNTs), AChE and choline oxidases (COx) have been covalently coimmobilized on multiwall carbon nanotubes (MWNTs) for the preparation of an organophosphorus pesticide (OP) biosensor [40, 41], Another OP biosensor has also been constructed by adsorption of AChE on MWNTs modified thick film [8], More recently AChE has been covalently linked with MWNTs doped glutaraldehyde cross-linked chitosan composite film [11], in which biopolymer chitosan provides biocompatible nature to the enzyme and MWNTs improve the conductive nature of chitosan. Even though these enzyme immobilization techniques have been reported in the last three decades, no method can be commonly used for all the enzymes by retaining their complete activity. 

Multivariate curve resolution, 6 54—56 Multivariate linear regression, 6 32—35 Multivariate optical elements (MOE), 6 68 Multiwalled carbon nanotubes (MWCNTs), 77 48, 49 22 720 26 737. See also Carbon nanotubes (CNTs) Multiwall nanotubes (MWNTs) synthesis of, 26 806 Multiwall fullerenes, 12 231 Multiwall nanotubes (MWNTs), 12 232 Multiwall paper bags, 78 11 Multiway analysis, 6 57-63 Multiyear profitability analysis, 9 535-537 Multiyear venture analysis, 0 537-544 sample, 9 542-S44 Mummification, 5 749 Mumps vaccine, 25 490 491 Mumps virus, 3 137 Municipal biosolids, as biomass, 3 684 Municipal distribution, potential for saline water use in, 26 55-56 Municipal effluents, disposal of, 26 54 Municipal landfill leachate, chemicals found in, 25 876t... 

The 0-d nanoparticles can be nano-metal oxides (such as silica,1 titania,2 alumina3), nano-metal carbide,4 and polyhedral oligomeric silsesquioxanes (POSS),5 to name just a few the 1-d nanofibers can be carbon nanofiber,6 and carbon nanotubes (CNT),7 which could be single-wall CNTs (SWCNT) or multiwall CNTs (MWCNT) etc. the 2-d nano-layers include, but are not limited to, layered silicates,8 layered double hydroxides (LDH),9 layered zirconium phosphate,10 and layered titanates,11 etc. 3-d nano-networks are rarely used and thus examples are not provided here. 

For large scale production of carbon nanotubes and nanofibers chemical vapor deposition (CVD) method is most effective. Acetylene, ethylene, propylene, methane, natural gas (consisting predominantly of propane), carbon monoxide were used as a source of carbon [ 1 -8] (in view of large number of publications on CNT synthesis these references are selected arbitrary). Ethylene and possibly propylene are most convenient carbon sources for mass synthesis of high quality multiwall CNT (MWNT). 

Double-walled carbon nanotubes (DWNTs), first observed in 1996, constitute a unique family of carbon nanotubes (CNTs). -2 DWNTs occupy a position between the single-walled carbon nanotubes (SWNTs) and the multiwalled carbon nanotubes (MWNTs), as they consist of two concentric cylinders of rolled graphene. DWNTs possess useful electrical and mechanical properties with potential applications. Thus, DWNTs and SWNTs have similar threshold voltages in field electron emission, but the DWNTs exhibit longer lifetimes.3 Unlike SWNTs, which get modified structurally and electronically upon functionalization, chemical functionalization of DWNTs surfaces would lead to novel carbon nanotube materials where the inner tubes are intact. The stability of DWNTs is controlled by the spacing of the inner and outer layers but not by the chirality of the tubes 4 therefore, one obtains a mixture of DWNTs with varying diameters and chirality indices of the inner and outer tubes. DWNTs have been prepared by several techniques, such as arc discharge5 and chemical vapor depo-... 

Due to their small size and high surface area, nanoparticles can be applied to modify electrode surface property. Convenient and sensitive electrochemical sensors to various targets have been set up by using nanoparticle modification. The determination of acetaminophen in a commercial paracetamol oral solution was reported using a multiwall CNTs composite film-modified glassy carbon electrode with a detection limit of 50 nM (Li etal. 2006a). Heavy metal ions, such as ar-senite (Dai and Compton 2006 Majid et al. 2006) and lead ion (Cui et al. 2005),... 

Ceo = Fullerene SWNTs = Single-walled carbon nanotubes MWNTs = Multiwalled carbon nanotubes DWNTs = Double-walled carbon nanotubes CNTs = carbon nanotubes TEM = Transmission electron microscopy HRTEM = High-resolution transmission electron microscopy SEM = Scanning electron microscopy AFM = Atomic force microscopy Ch = Chiral vector CVD = Chemical vapor deposition HiPco process = High-pressure disproportionation of CO RBM = Radical breathing vibration modes DOS = Electronic density of states. 

Figure 19 Computer-generated images of carbon nanostructures showing (A) a spherical C60 fullerene Buckyball structure, (B) a conical form, (C) a SWNT and (D) a cylindrical multiwalled CNT MWNT. Abbreviations SWNT, single-walled nanotube MWNT, multiwalled nanotube. Source From Ref. 102.

Aligned multiwall CNT arrays were synthesized as a basis for a microstructured catalyst, which was then tested in the Fischer-Tropsch reaction in a microchannel reactor [269]. Fabrication of such a structured catalyst first involved MOCVD of a thin but dense A1203 film on a FeCrAlY foam to enhance the adhesion between the catalyst and the metal substrate. Then, multiwall CNTs were deposited uniformly on the substrate by controlled catalytic decomposition of ethene. Coating the outer surfaces of the nanotube bundles with an active catalyst layer results in a unique hierarchical structure with small interstitial spaces between the carbon bundles. The microstructured catalyst was characterized by the excellent thermal conductivity inherent to CNTs, and heat could be efficiently removed from the catalytically active sites during the exothermic Fischer-Tropsch synthesis. 

A sheet of paper may be rolled up with its edges connected in a butt joint to generate a tube. Performing this experiment hypothetically with a graphene layer results in a carbon tube. Such structures actually exist they are entirely made up from carbon atoms and accommodate a cylindrical cavity. Different diameters provided, several of these tubes may fit one into another to make a multiwalled carbon tube. The diameter of both single- and multiwalled species measures on the nanometer scale, so they have been named carbon nanotuhes (CNT). These fascinating objects represent another modification of the element carbon. They will be the subject of the ensuing chapter. 

Another new structure type, carbon nanotubes (CNTs), was discovered in 1991 [99]. Carbon nanotubes have high mechanical and chemical stability due to their unique structure and properties and can be used as modules in nanotechnology. Two types of carbon nanotubes, single-walled nanotubes (SWNT) and multiwalled nanotubes (MWNTs), were developed. Single-walled nanotubes (SWNT) consist of... 

---