Carbon electrodes double layer

Farahmandi C, Dispennette J, Blank E, Kolb A. Maxwell Technologies. Multi-electrode double layer capacitor having single electrolyte seal and aluminium-impregnated carbon cloth electrodes. US patent /1996/000726728. 

FIGURE 4.7 Experimental setup for in situ studies of ion adsorption on the surface of microporous carbon electrodes. (Reprinted with permission from Boukhalfa, S. et al. 2014. In situ small angle neutron scattering revealing ion sorption in microporous carbon electrical double layer capacitors. ACS Nano 8, 2495-2503. Copyright 2014 American Chemical Society.)... 

Combining Equations (7.6) and (7.4), the specific capacitance of fhe carbon-based double-layer material at the electrode potential E can be expressed as... 

In this work, simple (single-use) biosensors with a layer double stranded (ds) calf thymus DNA attached to the surface of screen-printed carbon electrode assembly have been prepared. The sensor efficiency was significantly improved using nanostructured films like carbon nanotubes, hydroxyapatite and montmorillonite in the polyvinylalcohol matrix. 

Tanahashi, 1., Yoshida, A. and Nishino, A., Electrochemical characterization of activated carbon fiber cloth polarizable electrodes for electric double layer capacitors. J. Electrochem. Soc., 1990, 137(10), 3052 3056. 

Ishikawa, M., Morita, M., lhara, M. and Matsuda, Y., Electric double layer capacitor composed of activated carbon fiber cloth electrodes and solid polymer electrolytes containing alkylammonium salt, J. Electrochem. Soc., 1994, 141(7), 1730 1734. 

Ishikawa, M., Sakamoto, A., Morita, M., Matsuda, Y. and Ishida, K., Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double layer capacitors, J. Power Sources, 1996, 60(2), 233 238. 

In recent years, many types of double-layer capacitors have been built with porous or extremely rough carbon electrodes. Activated carbon or materials produced by carbonization and partial activation of textile cloth can be used for these purposes. At carbon materials, the specific capacity is on the order of 10 J,F/cm of trae surface area in the region of ideal polarizability. Activated carbons have specific surface areas attaining thousands of mVg. The double-layer capacity can thus attain several tens of farads per gram of electrode material at the surfaces of such carbons. 

The total capacity of a ruthenium oxide electrode [the usual double-layer capacity plus the pseudocapacity of reaction (21.4)] is rather high (i.e., several hundred F/g), even more than at the electrodes of carbon double-layer capacitors. The maximum working voltage of ruthenium oxide pseudocapacitors is about 1.4 V. 

Kunimatsu K, Golden WG, Seki H, Philpott MR. 1985a. Carbon monoxide adsorption on a platinum electrode studied by polarization modulated FT-IRRAS. 1. Co Adsorbed in the double-layer potential region and its oxidation in acids. Langmuir 1 245 -250. 

A classic definition of electrochemical ultracapacitors or supercapacitors summarizes them as devices, which store electrical energy via charge in the electrical double layer, mainly by electrostatic forces, without phase transformation in the electrode materials. Most commercially available capacitors consist of two high surface area carbon electrodes with graphitic or soot-like material as electrical conductivity enhancement additives. Chapter 1 of this volume contains seven papers with overview presentations, and development reports, as related to new carbon materials for this emerging segment of the energy market. 

The pores of the silica template can be filled by carbon from a gas or a liquid phase. One may consider an insertion of pyrolytic carbon from the thermal decomposition of propylene or by an aqueous solution of sucrose, which after elimination of water requires a carbonization step at 900°C. The carbon infiltration is followed by the dissolution of silica by HF. The main attribute of template carbons is their well sized pores defined by the wall thickness of the silica matrix. Application of such highly ordered materials allows an exact screening of pores adapted for efficient charging of the electrical double layer. The electrochemical performance of capacitor electrodes prepared from the various template carbons have been determined and are tentatively correlated with their structural and microtextural characteristics. 

Carbonaceous materials play a key role in achieving the necessary performance parameters of electrochemical capacitors (EC). In fact, various forms of carbon constitute more than 95% of electrode composition [1], Double layer capacity and energy storage capacity of the capacitor is directly proportional to the accessible electrode surface, which is defined as surface that is wetted with electrolyte and participating in the electrochemical process. 

High porosity carbons ranging from typically microporous solids of narrow pore size distribution to materials with over 30% of mesopore contribution were produced by the treatment of various polymeric-type (coal) and carbonaceous (mesophase, semi-cokes, commercial active carbon) precursors with an excess of KOH. The effects related to parent material nature, KOH/precursor ratio and reaction temperature and time on the porosity characteristics and surface chemistry is described. The results are discussed in terms of suitability of produced carbons as an electrode material in electric double-layer capacitors. 

Porous carbons are among the most attractive electrode materials for electric double layer capacitors (EDLC), where the charge accumulation occurs mainly by electrostatic attraction forces at the clcctrode/electrolyte interface [1-3]. Advantages of this class of materials include high surface... 

The air gas-diffusion electrode developed in this laboratory [5] is a double-layer tablet (thickness ca.1.5 mm), which separates the electrolyte in the cell from the surrounding air. The electrode comprises two layers a porous, from highly hydrophobic, electrically conductive gas layer (from the side of the air) and a catalytic layer (from the side of the electrolyte). The gas layer consists of a carbon-based hydrophobic material produced from acetylene black and PTFE by a special technology [6], The high porosity of the gas layer ensures effective oxygen supply into the reaction zone of the electrode simultaneously the leakage of the electrolyte through the electrode... 

Fig. 7. A schematic diagram of an electric double-layer capacitor using active carbon electrodes.

---