Carbene complexes catalytic intermediates

Catalytic cyclopropanation of alkenes has been reported by the use of diazoalkanes and electron-rich olefins in the presence of catalytic amounts of pentacarbonyl(rj2-ris-cyclooctene)chromium [23a,b] (Scheme 6) and by treatment of conjugated ene-yne ketone derivatives with different alkyl- and donor-substituted alkenes in the presence of a catalytic amount of pentacarbon-ylchromium tetrahydrofuran complex [23c]. These [2S+1C] cycloaddition reactions catalysed by a Cr(0) complex proceed at room temperature and involve the formation of a non-heteroatom-stabilised carbene complex as intermediate. 

Closely related to the ring-closing metathesis of enynes (Section 3.2.5.6), catalyzed by non-heteroatom-substituted carbene complexes, is the reaction of stoichiometric amounts of Fischer-type carbene complexes with enynes [266,308 -315] (for catalytic reactions, see [316]). In this reaction [2 + 2] cycloaddition of the carbene complex and the alkyne followed by [2 -t- 2] cycloreversion leads to the intermediate formation of a non-heteroatom-substituted, electrophilic carbene complex. This intermediate, unlike the corresponding nucleophilic carbene... 

As mentioned in earlier sections of this chapter, alkylidene complexes are crucial intermediates in olefin metathesis, and this process occurs by sequential [2+2] reactions of olefins or alkynes with the metal-carbene complex. Catalytic metathesis of olefins and... 

At this point the catalytic process developed by Dotz et al. using diazoalkanes and electron-rich dienes in the presence of catalytic amounts of pentacar-bonyl(r]2-ds-cyclooctene)chromium should be mentioned. This reaction leads to cyclopentene derivatives in a process which can be considered as a formal [4S+1C] cycloaddition reaction. A Fischer-type non-heteroatom-stabilised chromium carbene complex has been observed as an intermediate in this reaction [23a]. 

More recently, Schrock has reported the formation of coordinatively unsaturated Ta and W carbyne complexes (124). Like unsaturated carbene complexes, these carbyne compounds are now established as being active intermediates in a number of catalytic reactions. The discovery of acetylene metathesis reactions catalyzed by carbyne complexes (3), for example, has generated considerable interest in this class of compound. 

The olefin binding site is presumed to be cis to the carbene and trans to one of the chlorides. Subsequent dissociation of a phosphine paves the way for the formation of a 14-electron metallacycle G which upon cycloreversion generates a pro ductive intermediate [ 11 ]. The metallacycle formation is the rate determining step. The observed reactivity pattern of the pre-catalyst outlined above and the kinetic data presently available support this mechanistic picture. The fact that the catalytic activity of ruthenium carbene complexes 1 maybe significantly enhanced on addition of CuCl to the reaction mixture is also very well in line with this dissociative mechanism [11] Cu(I) is known to trap phosphines and its presence may therefore lead to a higher concentration of the catalytically active monophosphine metal fragments F and G in solution. 

When alkenes are allowed to react with certain catalysts (mostly tungsten and molybdenum complexes), they are converted to other alkenes in a reaction in which the substituents on the alkenes formally interchange. This interconversion is called metathesis 126>. For some time its mechanism was believed to involve a cyclobutane intermediate (Eq. (16)). Although this has since been proven wrong and found that the catalytic metathesis rather proceeds via metal carbene complexes and metallo-cyclobutanes as discrete intermediates, reactions of olefins forming cyclobutanes,... 

The transition metal-catalyzed cyclopropanation of alkenes is one of the most efficient methods for the preparation of cyclopropanes. In 1959 Dull and Abend reported [617] their finding that treatment of ketene diethylacetal with diazomethane in the presence of catalytic amounts of copper(I) bromide leads to the formation of cyclopropanone diethylacetal. The same year Wittig described the cyclopropanation of cyclohexene with diazomethane and zinc(II) iodide [494]. Since then many variations and improvements of this reaction have been reported. Today a large number of transition metal complexes are known which react with diazoalkanes or other carbene precursors to yield intermediates capable of cyclopropanating olefins (Figure 3.32). However, from the commonly used catalysts of this type (rhodium(II) or palladium(II) carboxylates, copper salts) no carbene complexes have yet been identified spectroscopically. 

Particularly interesting is the reaction of enynes with catalytic amounts of carbene complexes (Figure 3.50). If the chain-length between olefin and alkyne enables the formation of a five-membered or larger ring, then RCM can lead to the formation of vinyl-substituted cycloalkenes [866] or heterocycles. Examples of such reactions are given in Tables 3.18-3.20. It should, though, be taken into account that this reaction can also proceed by non-carbene-mediated pathways. Also Fischer-type carbene complexes and other complexes [867] can catalyze enyne cyclizations [267]. Trost [868] proposed that palladium-catalyzed enyne cyclizations proceed via metallacyclopentenes, which upon reductive elimination yield an intermediate cyclobutene. Also a Lewis acid-catalyzed, intramolecular [2 + 2] cycloaddition of, e.g., acceptor-substituted alkynes to an alkene to yield a cyclobutene can be considered as a possible mechanism of enyne cyclization. 

Because acceptor-substituted carbene complexes can normally not be isolated, generation must occur in the presence of a suitable substrate. If during carbene-transfer from the intermediate carbene complex to the substrate the complex L M (Figure 4.1) is regenerated, then catalytic amounts of this complex only will be... 

Acceptor-substituted carbene complexes are highly reactive intermediates, capable of transforming organic compounds in many different ways. Typical reactions include insertion into o-bonds, cyclopropanation, and ylide formation. Generally, acceptor-substituted carbene complexes are not isolated and used in stoichiometric amounts, but generated in situ from a carbene precursor and transition metal derivative. Usually only catalytic quantities of a transition metal complex are required for complete conversion of a carbene precursor via an intermediate carbene complex into the final product. 

Ylide formation, and hence X-H bond insertion, generally proceeds faster than C-H bond insertion or cyclopropanation [1176], 1,2-C-H insertion can, however, compete efficiently with X-H bond insertion [1177]. One problem occasionally encountered in transition metal-catalyzed X-H bond insertion is the deactivation of the (electrophilic) catalyst L M by the substrate RXH. The formation of the intermediate carbene complex requires nucleophilic addition of a carbene precursor (e.g. a diazocarbonyl compound) to the complex Lj,M. Other nucleophiles present in the reaction mixture can compete efficiently with the carbene precursor, or even lead to stable, catalytically inactive adducts L M-XR. For this reason carbene X-H bond insertion with substrates which might form a stable complex with the catalyst (e.g. amines, imidazole derivatives, thiols) often require larger amounts of catalyst and high reaction temperatures. 

An understanding of the mechanism [10] for rhodium-mediated intramolecular C-H insertion begins with the recognition that these a-diazo carbonyl derivatives can also be seen as stabilized ylides, such as 15 (Scheme 16.4). The catalytic rhodium(II) car-boxylate 16 is Lewis acidic, with vacant coordination sites at the apical positions, as shown. The first step in the mechanism, carbene transfer from the diazo ester to the rhodium, begins with complexation of the electron density at the diazo carbon with an open rhodium coordination site, to give 17. Back-donation of electron density from the proximal rhodium to the carbene carbon, with concomitant loss of N2, then gives the intermediate rhodium carbene complex 18. 

Reactions of Cjq with metal carbene complexes also yield the [6,6] methano-fullerenes [392]. These adducts are probably not formed via a carbene addition, but via a formal [2-1-2] cycloaddition under formation of a metalla cyclobutane intermediate. The Fischer carbene complex [mefhyl(methoxymethylene)]pentacarbonyl chromium can be utilized to prepare l,2-mefhyl(methoxymethano)-fullerene in 20% yield [392]. A tungsten carbene complex was primarily used to initiate the formation of a polyacetylene polymer, but it was discovered that addition of to the complex-polymer-mixture improves the polymerization and dramatically increases the catalytic activity of the carbene complex [393]. can be integrated into the polymer via carbene addition. 

Ethers, sulfides, amines, carbonyl compounds, and imines are among the frequently encountered Lewis bases in the ylide formation from such metal carbene complex. The metal carbene in the ylide formation can be divided into stable Fisher carbene complex and unstable reactive metal carbene intermediates. The reaction of the former is thus stoichiometric and the latter is usually a transition metal complex-catalyzed reaction of a-diazocarbonyl compounds. The decomposition of a-diazocarbonyl compounds with catalytic transition metal complex has been the most widely used approach to generate reactive metal carbenes. For compressive reviews, see Refs 1,1a. 

Transition-metal catalysis, especially by copper, rhodium, palladium and ruthenium compounds, is another approved method for the decomposition of diazo compounds. It is now generally accepted that short-lived metal-carbene intermediates are or may be involved in many of the associated transformations28. Nevertheless, these catalytic carbene transfer reactions will be fully covered in this chapter because of the close similarity in reaction modes of electrophilic carbenes and the presumed electrophilic metal-carbene complexes. 

The reaction of Ru(TMP) with ethyl diazoacetate yielded a carbene complex, e.g. Ru(CHC02Et)(TMP) [316], An excess of the diazo compound led to catalytic formation of cis- and trans diethyl maleate in an unexpected ratio of 15 1. The nucleophilic ethyl diazoacetate is proposed to attack the electrophilic carbene complex and produce an intermediate betaine-line species which eliminates both Ru(TMP) and N2 to form the maleates. Similar reactions were observed with Os(TTP) complexes [313a], These reactions are reminiscent of the above-mentioned lability of a putative methyleneruthenium porphyrin. 

Treatment of diphenylketene (407) with a catalytic amount of Co2(CO)8 produces tetraphenylethylene (410,) involving a carbene complex as an intermediate. In this reaction carbene complex 408 is formed from 407 and Co2(CO)8, the cobaltacyclo-butanone 409 is generated by cycloaddition of 407 and 408, and cleaved to give 410 [130],... 

Olefin metathesis is a useful tool for the formation of unsaturated C-C bonds in organic synthesis, and the reaction has been generally accepted to proceed through a series of metallacyclobutanes and carbene complexe intermediates [40-43]. For this type of reaction, the most widely used catalysts include an alkoxyl imido molybdenum complex (Schrock catalyst) [44] and a benzylidene ruthenium complex (Grubbs catalyst) [43]. The former is air- and moisture-sensitive and has some other drawbacks such as intolerance to many functional groups and impurities the latter has increased tolerance to water and many reactions have been used in aqueous solution without any loss of catalytic efficiency. 

Complexes of type [LyM (CH2)IIX ], where n > 1, have been shown to be useful precursors for hetero- and homobimetallic n(a.,a>) alkanediyl complexes, [LjcM(CH2)bM L, ] (where ML, is not necessarily the same as M Lj,). Such hydrocarbon-bridged binuclear compounds have been proposed as models for intermediates in the Fischer-Tropsch reaction (18,19) and other significant catalytic processes (20-23). Some [LyM (CH2)BX ] complexes are precursors to cyclic carbene complexes (Section III), whereas others have been shown to have synthetic utility in organic chemistry (24). 

A study of this reaction is an appropriate example of the usefulness of spectroscopic method in mechanistic studies. H NMR studies on the reaction between the catalyst and the diazo compound show complexes 2.1 and 2.2 of Fig. 2.11 to be present in the reaction mixture. Complex 2.1 is stable at -40°C, and on warming to 0°C it undergoes conversion to 2.2. This reaction i.e., conversion of 2.1 to 2.2 is one of the several pieces of evidence for the intermediacy of the carbene complex 2.3. In other words, in situ NMR data, in conjunction with other evidences, indicate the involvement of 2.3 as a catalytic intermediate. 

Metal aUcylidene complexes (see Schrock-type Carbene Complexes) have been proposed as intermediates in many catalytic reactions, including alkene metathesis (see Organic Synthesis Using Metal-mediated Metathesis Reactions), alkene and aUcyne polymerization, methylenation of carbonyl compounds, and cyclopropanation of alkenes. ... 

New evidence as to the nature of the intermediates in catalytic diazoalkane decomposition comes from a comparison of olefin cyclopropanation with the electrophilic metal carbene complex (CO)jW—CHPh on one hand and Rh COAc) / NjCHCOOEt or Rh2(OAc)4 /NjCHPh on the other . For the same set of monosubstituted alkenes, a linear log-log relationship between the relative reactivities for the stoichiometric reaction with (CO)5W=CHPh and the catalytic reaction with RhjfOAc) was found (reactivity difference of 2.2 10 in the former case and 14 in the latter). No such correlation holds for di- and trisubstituted olefins, which has been attributed to steric and/or electronic differences in olefin interaction with the reactive electrophile . A linear relationship was also found between the relative reactivities of (CO)jW=CHPh and Rh2(OAc) NjCHPh. These results lead to the conclusion that the intermediates in the Rh(II)-catalyzed reaction are very similar to stable electrophilic carbenes in terms of electron demand. As far as cisjtrans stereoselectivity of cyclopropanation is concerned, no obvious relationship between Rh2(OAc) /N2CHCOOEt and Rh2(OAc),/N2CHPh was found, but the log-log plot displays an excellent linear relationship between (CO)jW=CHPh and Rh2(OAc) / N2CHPh, including mono-, 1,1-di-, 1,2-di- and trisubstituted alkenes In the phenyl-carbene transfer reactions, cis- syn-) cyclopropanes are formed preferentially, whereas trans- anti-) cyclopropanes dominate when the diazoester is involved. 

The catalytic cycle begins with a metal carbene complex (96), which may be added directly to the reaction mixture or is afforded rapidly upon displacement of a suitable ligand on the metal center by the alkene. Subsequent addition to this carbene complex by another alkene (97) forms a metallacyclobutane intermediate, which can readily dissociate to a metaUacarbene complex and an alkene. In some catalysts, the metal bound carbene species has a high rotation barrier, which allows interaction of an empty pz orbital of the carbene complex with the incoming alkene (Scheme 22). 

Studies on these carbene complexes, especially those of the Schrock type, have attracted special interest in connection with the mechanism of catalytic olefin metathesis reactions. The formation of metallacyclobutane intermediate from the oxidative cycloaddition reaction between carbene complex and olefin was found to be an important key step in the catalytic cycle (eq. (5)). 

---