Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Building products, chemicals

Formaldehyde. Worldwide, the largest amount of formaldehyde (qv) is consumed in the production of urea—formaldehyde resins, the primary end use of which is found in building products such as plywood and particle board (see Amino resins and plastics). The demand for these resins, and consequently methanol, is greatly influenced by housing demand. In the United States, the greatest market share for formaldehyde is again in the constmction industry. However, a fast-growing market for formaldehyde can be found in the production of acetylenic chemicals, which is driven by the demand for 1,4-butanediol and its subsequent downstream product, spandex fibers (see Fibers, elastomeric). [Pg.281]

The physical properties of the reinforced polyester product made from chopped glass are Hsted in Table 1. The chemical resistance varies according to the composition but is generally good. Its principal uses in building products are for sanitary ware, eg, tub-shower units, and for panels, especially translucent or cement-filled types for roofing and walls of commercial or industrial buildings. [Pg.328]

However the formation ofXY will not proceed spontaneously because the free energy of the product PCY) exceeds the free energy of the substrates (X and Y). We refer to the formation of XV as being an unfavorable process because, for Equation (4), AG > 0. Cells can form the XY they need only by coupling its formation to a reaction, such as the breakdown of ATP, that provides the energy required to build the chemical bonds that hold X and Y together. This process is shown in the coupled reaction below ... [Pg.169]

These test procedures and standards are subject to change, so it is essential to keep up to date if one has to comply with them. It may be possible to obtain the latest issue on a specific test (such as a simple tensile test or a molecular weight test) by contacting the organization that issued it. For example, the ASTM issues new annual standards that include all changes. Their Annual Books of ASTM Standards contain more than seven thousand standards published in sixty-six volumes that include different materials and products. There are four volumes specifically on plastics 08.01-Plastics 1 08.02-Plastics 11 08.03-Plastics III, and 08.04-Plastic Pipe and Building Products. Other volumes include information on plastics and RPs. The complete ASTM index are listed under different categories for the different products, types of tests (by environment, chemical resistance, etc.), statistical analyses of different test data, and so on (56,128,129). [Pg.301]

Hydrogen cyanide is an important building block chemical for the synthesis of a variety of industrially important chemicals, such as 2 hydroxy-4 methylthiobutyric acid, adiponitrile, nitrilotriacetic acid, lactic acid, and methyl methacrylate. The primary commercial routes to hydrogen cyanide are the reaction of methane and ammonia under aerobic (Andrussow Process) or anaerobic conditions (Degussa Process), or the separation of hydrogen cyanide as a by-product of the ammoxidation of propylene < ) The ammoxidation of methanol could represent an attractive alternate route to HCN for a number of reasons. First, on a molar basis, the price of methanol has become close to that of methane as world methanol capacity has increased. However, an accurate long term pricing picture for these two raw... [Pg.189]

Standardized Emission Testing This is probably the most frequent application of test chambers and cells, because indoor related materials and products need to be evaluated for the release of volatile chemicals in order to ensure a healthy indoor climate. Many procedures have been established for different types of products. A very well-known scheme was developed by the German Committee for Health-related Evaluation of Building Products (AgBB) for the evaluation of building... [Pg.109]

Knudsen, H.N., Kjaer, U.D., Nielsen, P.A. and Wolkoff, P. (1999) Sensory and chemical characterization of VOC emissions from building products impact of concentration and air velocity. Atmospheric Environment,... [Pg.185]

Indoor air quality is an important determinant of health and well-being. To maintain better indoor air quality, we have to understand the mechanism of indoor air pollution. For this purpose, the measurement of indoor air concentration and use of chemical analysis methods are essential. To estimate indoor air concentration, we have to know the emission and ventilation rates. Emission takes place not only from building products but also from automobile parts, electric appliances, office equipment such as printers, household consumer products, and even printed materials like newspapers. This book serves as a useful guide for chemists, architects, mechanical engineers, constructors, and manufacturers of electronic products. It emphasizes a holistic and multidisciplinary approach toward the indoor environment. [Pg.448]

Once die meat has been extracted, mollusk shells are usually discarded. Huge middens or piles of clam, oyster, and other shells disclose the appetite people have for these animals. Shells have sometimes been processed, either fresh or from middens, to provide calcium carbonate for a variety of purposes. Calcium carbonate has a huge number of practical uses in medicine, food production, chemicals, cosmetics, building materials, and many more. [Pg.108]

Many American and European plastics firms have built or are building production plants in China to capitalize on the comparatively cheap labor available there, and to more directly serve the continuing demand. For example, a 1 billion chemical plant in Shanghai is owned by Huntsman Corp. of The Woodlands, Texas, BASF AG of Germany and three Chinese companies. The plant produces diphenylmethane diisocyanate which is used in foam insulation and plastic chairs. [Pg.40]

Building Products Disposable Tableware Paper Wood Chemicals Gypsum Products Packaging Products Cleaning Chemicals... [Pg.285]

CSPE have excellent combinations of properties that include total resistance to ozone excellent resistance to abrasion, weather resistance even in light colors, heat, flame, oxidizing chemical, solvents, crack growth, and dielectric properties. Also provide low moisture absorption, resistance to oil similar to neoprene, low temperature flexibility is fair at -40C (-40F), low gas permeability for an elastomer and good adhesion to substrates. Can be made into a wide range of colors. Use includes hoses, roll covers, tank liners, wire and cable covers, footware, and building products (flash, sealing, etc.). [Pg.101]

Integrating environmental requirements on chemicals in product standards (e.g., building products). [Pg.396]

C64 Cole, W. F. and Moorchead, D. R., in Autoclaved Calcium Silicate Building Products, p. 134, Society of Chemical Industry, London (1967). [Pg.416]


See other pages where Building products, chemicals is mentioned: [Pg.18]    [Pg.18]    [Pg.110]    [Pg.267]    [Pg.97]    [Pg.60]    [Pg.39]    [Pg.13]    [Pg.245]    [Pg.1656]    [Pg.166]    [Pg.168]    [Pg.400]    [Pg.447]    [Pg.209]    [Pg.94]    [Pg.1506]    [Pg.37]    [Pg.152]    [Pg.200]    [Pg.236]    [Pg.264]    [Pg.284]    [Pg.285]    [Pg.348]    [Pg.452]    [Pg.527]    [Pg.541]    [Pg.560]    [Pg.326]    [Pg.327]    [Pg.354]    [Pg.381]    [Pg.1834]   


SEARCH



Building products

Building products, chemicals calcium carbonate

Building products, chemicals polystyrene

Building products, chemicals polyvinyl chloride

© 2024 chempedia.info