Asymmetric synthesis 3 + 2 cycloaddition reactions

Recently, the intramolecular nitrile oxide-alkene cycloaddition sequence was used to prepare spiro- w(isoxazolines), which are considered useful as chiral ligands for asymmetric synthesis (321). Reaction of the dibutenyl-dioxime (164) (derived from the diester 163) with sodium hypochlorite afforded a mixture of diastereomeric isoxazolines 165-167 in 74% combined yield (Scheme 6.80) (321). It was discovered that a catalytic amount of the Cu(II) complex 165-Cu(acac)2, where acac = acetylacetonate, significantly accelerated the reaction of diisopropylzinc... 

Asymmetric synthesis has achieved a position as one of the most important areas of modem organic chemistry. Dnring the past 20 years the number of publications in this area has been vast. On the pallet of organic reactions that are used in asymmetric synthesis, cycloadditions possess a prominent position, since they are some of the most efficient methods for creating new chiral centers with control of stereochemistry (1-4). The ability to introduce more than one new chiral center in a single step with control of both relative and absolute stereochemistry makes cycloaddition reactions highly attractive key reactions for stereoselective synthesis. 

Asymmetric synthesis of 3-amino (3-lactams via Staudinger ketene-imine cycloaddition reaction 98KGS1448. 

See e.g. (a) W. Cahhuthehs, Cycloaddition Reactions in Organic Synthesis, Tetrahedron Organic Chemistry Series Vol. 8 Pergamon Press Elmsford, NY 1990 (b) I. OjiMA, Catalytic Asymmetric Synthesis, VCH Publishers. Inc. New York. 1993 ... 

Whereas there are numerous examples of the application of the products from diastereoselective 1,3-dipolar cycloaddition reaction in synthesis [7, 8], there are only very few examples on the application of the products from metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction in the synthesis of potential target molecules. The reason for this may be due to the fact that most metal-catalyzed asymmetric 1,3-dipolar cycloaddition reaction have been carried out on model systems that have not been optimized for further derivatization. One exception of this is the synthesis of a / -lactam by Kobayashi and Kawamura [84]. The isoxazoli-dine endo-21h, which was obtained in 96% ee from the Yb(OTf)3-BINOL-catalyzed... 

The development of metal-catalyzed asymmetric 1,3-dipolar cycloaddition reactions is probably going to continue during the next decade. High level of control of the reactions of nitrones has been obtained, and for these reactions one of the next challenges is to explore new substrates that are designed for application in synthesis. The development of metal-catalyzed asymmetric reactions of the other... 

Imidazole and its derivatives continued to play an important role in asymmetric processes. Optically active pyrroloimidazoles 26 were prepared by the cycloaddition of homochiral imidazolium ylides with activated alkenes <96TL1707>. This reaction was used in the enantioselective preparation of pyrrolidines <96TL1711>. A review of the use of chiral imidazolidines in asymmetric synthesis was published <96PAC531> and the preparation and use of a new camphor-derived imidazolidinone-type auxiliary 27 was reported < 6TL4565> <96TL6931>. 

CARRUTHERS Cycloaddition Reactions in Organic Synthesis GAWLEY AUBE Principies of Asymmetric Synthesis HASSNER STUMER Organic Syntheses based on Name Reactions and Unnamed Reactions... 

Since Huisgen s definition of the general concepts of 1,3-dipolar cycloaddition, this class of reaction has been used extensively in organic synthesis. Nitro compounds can participate in 1,3-dipolar cycloaddition as sources of 1,3-dipoles such as nitronates or nitroxides. Because the reaction of nitrones can be compared with that of nitronates, recent development of nitrones in organic synthesis is briefly summarized. 1,3-Dipolar cycloadditions to a double bond or a triple bond lead to five-membered heterocyclic compounds (Scheme 8.12). There are many excellent reviews on 1,3-dipolar cycloaddition, in particular, the monograph by Torssell covers this topic comprehensively. This chapter describes only recent progress in this field. Many papers have appeared after the comprehensive monograph by Torssell. Here, the natural product synthesis and asymmetric 1,3-dipolar cycloaddition are emphasized.630 Synthesis of pyrrolidine and -izidine alkaloids based on cycloaddition reactions are also discussed in this chapter. 

Various kinds of chiral acyclic nitrones have been devised, and they have been used extensively in 1,3-dipolar cycloaddition reactions, which are documented in recent reviews.63 Typical chiral acyclic nitrones that have been used in asymmetric cycloadditions are illustrated in Scheme 8.15. Several recent applications of these chiral nitrones to organic synthesis are presented here. For example, the addition of the sodium enolate of methyl acetate to IV-benzyl nitrone derived from D-glyceraldehyde affords the 3-substituted isoxazolin-5-one with a high syn selectivity. Further elaboration leads to the preparation of the isoxazolidine nucleoside analog in enantiomerically pure form (Eq. 8.52).78... 

As discussed in Section 6.2, nitro compounds are good precursors of nitrile oxides, which are important dipoles in cycloadditions. The 1,3-dipolar cycloaddition of nitrile oxides with alkenes or alkynes provides a straightforward access to 2-isoxazolines or isoxazoles, respectively. A number of ring-cleaving procedures are applicable, such that various types of compounds may be obtained from the primary adducts (Scheme 8.18). There are many reports on synthetic applications of this reaction. The methods for generation of nitrile oxides and their reactions are discussed in Section 6.2. Recent synthetic applications and asymmetric synthesis using 1,3-dipolar cycloaddition of nitrile oxides are summarized in this section. 

Asymmetric synthesis of the rocaglamides was accomplished by employing [3+2] photo-cycloaddition mediated by functionalized TADDOL based chiral Brpnsted acids. The synthesis consisted of a [3+2] dipolar cycloaddition, a base-mediated a-ketol rearrangement and a hydroxyl-directed reaction <06JA7754>. Asymmetric synthesis of 1,2-dihydrobenzo /j]furans was achieved by adamantylglycine derived dirhodium tetracarboxylate catalyzed C-H insertion <06OL3437>. 

An example of asymmetric synthesis involving cycloaddition of an azide to dimethyl acetylenedicarboxylate is depicted in Scheme 172. Thus, asymmetric auxiliary 1042 reacts with styrene and sodium azide to generate azide 1043 in 90% yield and 94% diastereomeric purity. The following reaction (Scheme 172) with dimethyl acetylenedicarboxylate converts azide 1043 into triazole 1044 in 75% yield. Finally, the bond with selenium is cleaved by treatment with triphenyltin hydride and AIBN to furnish triazole 1045 in 80% yield and preserved optical purity (94%) <2003AGE3131>. 

CARRUTHERS Cycloaddition Reactions in Organic Synthesis CLARIDGE High-Resolution NMR Techniques in Organic Chemistry FINET Ligand Coupling Reactions with Heteroatomic Compounds GAWLEY AUBE Principles of Asymmetric Synthesis... 

The copper complex of these bis(oxazoline) compounds can also be used for hetero Diels-Alder reactions of acyl phosphonates with enol ethers.43 5 A favorable acyl phosphonate-catalyst association is achieved via complexation between the vicinal C=0 and P=0 functional groups. The acyl phosphonates are activated, leading to facile cycloaddition with electron-rich alkenes such as enol ethers. The product cyclic enol phosphonates can be used as building blocks in the asymmetric synthesis of complicated molecules. Scheme 5-36 shows the results of such reactions. 

Intermolecular cycloadditions or Diels-Alder reactions have proved to be a successful route to several valuable intermediates for natural product syntheses. In creating new chiral centers, most of these reactions apply single asymmetric induction. As mentioned in Chapter 3, in the asymmetric synthesis of the octa-hydronaphthalene fragment, the Roush reaction is used twice. Subsequent intramolecular cyclization leads to the key intermediate, the aglycones, of several natural antitumor antibiotics. On the other hand, the Diels-Alder reaction of a dienophile-bearing chiral auxiliary can also be used intramolecularly to build... 

In summary, asymmetric cycloadditions are powerful methods for the synthesis of complex chiral molecules because multiple asymmetric centers can be constructed in one-step transformations. Among them, reactions using chiral catalysts are the most effective and promising, and fruitful results have been reported in asymmetric Diels-Alder reactions. 

The asymmetric synthesis of allenes via enantioselective hydrogenation of ketones with ruthenium(II) catalyst was reported by Malacria and co-workers (Scheme 4.11) [15, 16]. The ketone 46 was hydrogenated in the presence of iPrOH, KOH and 5 mol% of a chiral ruthenium catalyst, prepared from [(p-cymene) RuC12]2 and (S,S)-TsDPEN (2 equiv./Ru), to afford 47 in 75% yield with 95% ee. The alcohol 47 was converted into the corresponding chiral allene 48 (>95% ee) by the reaction of the corresponding mesylate with MeCu(CN)MgBr. A phosphine oxide derivative of the allenediyne 48 was proved to be a substrate for a cobalt-mediated [2 + 2+ 2] cycloaddition. 

Intramolecular [4+2]-cycloaddition reactions, which involve base-induced isomerization of a propargyl ether to an allenyl ether, have been extensively studied. Treatment of 157 with a base caused an intramolecular Diels-Alder reaction of the intermediate allenyl ether to give tricyclic compounds 158 [131]. An asymmetric synthesis of benzofuran lactone 159 was achieved by an analogous procedure [132],... 

Hong and co-workers have described a formal [3-t-3] cycloaddition of a,P-unsaturated aldehydes using L-proline as the catalyst (Scheme 72) [225], Although the precise mechanism of this reaction is unclear a plausible explanation involves both iminium ion and enamine activation of the substrates and was exploited in the asymmetric synthesis of (-)-isopulegol hydrate 180 and (-)-cubebaol 181. This strategy has also been extended to the trimerisation of acrolein in the synthesis of montiporyne F [226],... 

If the mesomeric stabilization is provided by a double bond, the lithiated species is a homoenolate synthon, as shown in Scheme 44a. Reaction with an electrophile typically occurs at the y-position, yielding an enamine, which can then be hydrolyzed to a carbonyl compound. An important application of this approach is to incorporate a chiral auxiliary into the nitrogen substituents so as to effect an asymmetric synthesis. 2-AzaaUyl anions (Scheme 44b), which are generated by tin-lithium exchange, can be useful reagents for inter- and intramolecular cycloaddition reactions. ... 

As with any modern review of the chemical Hterature, the subject discussed in this chapter touches upon topics that are the focus of related books and articles. For example, there is a well recognized tome on the 1,3-dipolar cycloaddition reaction that is an excellent introduction to the many varieties of this transformation [1]. More specific reviews involving the use of rhodium(II) in carbonyl ylide cycloadditions [2] and intramolecular 1,3-dipolar cycloaddition reactions have also appeared [3, 4]. The use of rhodium for the creation and reaction of carbenes as electrophilic species [5, 6], their use in intramolecular carbenoid reactions [7], and the formation of ylides via the reaction with heteroatoms have also been described [8]. Reviews of rhodium(II) ligand-based chemoselectivity [9], rhodium(11)-mediated macrocyclizations [10], and asymmetric rho-dium(II)-carbene transformations [11, 12] detail the multiple aspects of control and applications that make this such a powerful chemical transformation. In addition to these reviews, several books have appeared since around 1998 describing the catalytic reactions of diazo compounds [13], cycloaddition reactions in organic synthesis [14], and synthetic applications of the 1,3-dipolar cycloaddition [15]. 

The [2 + 3] cycloaddition reaction of nitrile oxides, easily accessible from corresponding aldoximes, with different alkenes is known as an excellent route to isoxazohne derivatives . The reactions of asymmetric addition ° or addition of unsaturated ger-manes and stannanes to nitrile oxides were reviewed in recent years. In this subsection only the main directions of the synthesis of isoxazole derivatives are briefly reported. 

The initial work on the asymmetric [4-1-2] cycloaddition reactions of A -sulfinyl compounds and dienes was performed with chiral titanium catalysts, but low ee s were observed <2002TA2407, 2001TA2937, 2000TL3743>. A great improvement in the enantioselectivity for the reaction of AT-sulfinyl dienophiles 249 or 250 and acyclic diene 251 or 1,3-cyclohexadiene 252 was observed in the processes involving catalysis with Cu(ll) and Zn(ii) complexes of Evans bis(oxazolidinone) (BOX) ligands 253 and 254 <2004JOC7198> (Scheme 34). While the preparation of enantio-merically enriched hetero-Diels-Alder adduct 255 requires a stoichometric amount of chiral Lewis acid complex, a catalytic asymmetric synthesis of 44 is achieved upon the addition of TMSOTf. 

The use of chiral 2-alkylidene-l,3-dithiane 1,3-dioxides in asymmetric cycloaddition reactions has been demonstrated. A highly enantioselective synthesis of (—)-cispentacin by an intramolecular 1,3-dipolar cycloaddition was reported (Scheme 52) <20020L1227, 20030BC684>. 

Chiacchio et al. (43,44) investigated the synthesis of isoxazolidinylthymines by the use of various C-functionalized chiral nitrones in order to enforce enantioselec-tion in their cycloaddition reactions with vinyl acetate (Scheme 1.3). They found, as in the work of Merino et al. (40), that asymmetric induction is at best partial with dipoles whose chiral auxiliary does not maintain a fixed geometry and so cannot completely direct the addition to the nitrone. After poor results with menthol ester-and methyl lactate-based nitrones, they were able to prepare and separate isoxazo-lidine 8a and its diastereomer 8b in near quantitative yield using the A-glycosyl... 

---