Aluminum hydrides synthesis

Synthesis by high-dilution techniques requires slow admixture of reagents ( 8-24 hrs) or very large volumes of solvents 100 1/mmol). Fast reactions can also be carried out in suitable flow cells (J.L. Dye, 1973). High dilution conditions have been used in the dilactam formation from l,8-diamino-3,6-dioxaoctane and 3,6-dioxaoctanedioyl dichloride in benzene. The amide groups were reduced with lithium aluminum hydride, and a second cyclization with the same dichloride was then carried out. The new bicyclic compound was reduced with diborane. This ligand envelops metal ions completely and is therefore called a cryptand (B. Dietrich, 1969). 

The reaction of esters with Gngnard reagents and with lithium aluminum hydride both useful m the synthesis of alcohols were described earlier They are reviewed m Table 20 4 on page 848... 

Although a few simple hydrides were known before the twentieth century, the field of hydride chemistry did not become active until around the time of World War II. Commerce in hydrides began in 1937 when Metal Hydrides Inc. used calcium hydride [7789-78-8J, CaH2, to produce transition-metal powders. After World War II, lithium aluminum hydride [16853-85-3] LiAlH, and sodium borohydride [16940-66-2] NaBH, gained rapid acceptance in organic synthesis. Commercial appHcations of hydrides have continued to grow, such that hydrides have become important industrial chemicals manufactured and used on a large scale. 

L-Menthol [2216-51-5] (75) and D-menthol [15356-70-4] have been used as chiral auxiharies in the synthesis of optically active mandehc acids. Reduction of (-)-menthol ben2oylfomiate (76) with a stericaHy bulky reducing agent, ie, sodium bis(2-methylethoxy)aluminum hydride (RED-Al), followed by saponification, yields (R)-mandelic acid (32) of 90% ee. 

Hydroisoquinolines. In addition to the ring-closure reactions previously cited, a variety of reduction methods are available for the synthesis of these important ring systems. Lithium aluminum hydride or sodium in Hquid ammonia convert isoquinoline to 1,2-dihydroisoquinoline (175). Further reduction of this intermediate or reduction of isoquinoline with tin and hydrochloric acid, sodium and alcohol, or catalyticaHy using platinum produces... 

The versatility of lithium aluminum hydride permits synthesis of alkyl, alkenyl, and arylsilanes. Silanes containing functional groups, such as chloro, amino, and alkoxyl in the organic substituents, can also be prepared. Mixed compounds containing both SiCl and SiH cannot be prepared from organopolyhalosilanes using lithium aluminum hydride. Reduction is invariably complete. 

Another synthesis of the cortisol side chain from a C17-keto-steroid is shown in Figure 20. Treatment of a C3-protected steroid 3,3-ethanedyidimercapto-androst-4-ene-ll,17-dione [112743-82-5] (144) with a tnhaloacetate, 2inc, and a Lewis acid produces (145). Addition of a phenol and potassium carbonate to (145) in refluxing butanone yields the aryl vinyl ether (146). Concomitant reduction of the C20-ester and the Cll-ketone of (146) with lithium aluminum hydride forms (147). Deprotection of the C3-thioketal, followed by treatment of (148) with y /(7-chlotopetben2oic acid, produces epoxide (149). Hydrolysis of (149) under acidic conditions yields cortisol (29) (181). 

The classical synthesis iavolves the dissolution of a 33% Sb—67% Zn alloy by hydrochloric acid the evolved gases contain up to 14% stibiae. A detailed procedure usiag a Sb—Mg alloy has also beea described (16). Aluminum hydride or alkaU metal borohydrides have been used to reduce antimony(III) ia acidic aqueous solutioa to produce stibiae. A 23.6% yield of stibiae, based oa the borohydride used, has beea reported (17). A 78% yield based oa Sb has beea obtaiaed by gradually adding a solutioa that is 0.4 Min SbCl and saturated ia NaQ, to aqueous NaBH at mol ratios of NaBH iSbQ. >10 (18). 

Ethoxy-2-cyclohexenone is a useful intermediate in the synthesis of certain cyclohexenones. The reduction of 3-ethoxy-2-cyclohexenone with lithium aluminum hydride followed by hydrolysis and dehydration of the reduction product yields 2-cyclo-hexenone. Similarly, the reaction of 3-ethoxy-2-cyclohexenone with Grignard reagents followed by hydrolysis and dehydration of the addition product affords a variety of 3-substituted 2-cyclo-hexenones. ... 

The synthesis of 1,10-diaza-l 8-crown-6 (9) has been an important problem because this is the key starting material in the synthesis of numerous cryptands (see Chap. 8). Although first synthesized some years ago, the process has recently been patented. Di-azacrown 9 is prepared by a high dilution condensation of 1,8-diamino-3,7-dioxaoctane with ethylene glycol diacetyl chloride. The resulting diamide is then reduced with lithium aluminum hydride to give 9 in 56% overall yield from the open-chained diamine. The synthesis is illustrated In Eq. (4.8), below. 

Kyba and eoworkers prepared the similar, but not identical compound, 26, using quite a different approach. In this synthesis, pentaphenylcyclopentaphosphine (22) is converted into benzotriphosphole (23) by reduction with potassium metal in THF, followed by treatment with o "t/20-dichlorobenzene. Lithium aluminum hydride reduction of 23 affords l,2-i>/s(phenylphosphino)benzene, 24. The secondary phosphine may be deprotonated with n-butyllithium and alkylated with 3-chlorobromopropane. The twoarmed bis-phosphine (25) which results may be treated with the dianion of 24 at high dilution to yield macrocycle 26. The overall yield of 26 is about 4%. The synthetic approach is illustrated in Eq. (6.16), below. 

The success of the halo ketone route depends on the stereo- and regio-selectivity in the halo ketone synthesis, as well as on the stereochemistry of reduction of the bromo ketone. Lithium aluminum hydride or sodium borohydride are commonly used to reduce halo ketones to the /mm-halohydrins. However, carefully controlled reaction conditions or alternate reducing reagents, e.g., lithium borohydride, are often required to avoid reductive elimination of the halogen. 

Iodine azide, on the other hand, forms pure adducts with A -, A - and A -steroids by a mechanism analogous to that proposed for iodine isocyanate additions. Reduction of such adducts can lead to aziridines. However, most reducing agents effect elimination of the elements of iodine azide from the /mwj -diaxial adducts of the A - and A -olefins rather than reduction of the azide function to the iodo amine. Thus, this sequence appears to be of little value for the synthesis of A-, B- or C-ring aziridines. It is worthy to note that based on experience with nonsteroidal systems the application of electrophilic reducing agents such as diborane or lithium aluminum hydride-aluminum chloride may yet prove effective for the desired reduction. Lithium aluminum hydride accomplishes aziridine formation from the A -adducts, Le., 16 -azido-17a-iodoandrostanes (97) in a one-step reaction. The scope of this addition has been considerably enhanced by the recent... 

The reaction of esters with Gr-ignard reagents and with lithium aluminum hydride, both useful in the synthesis of alcohols, were described earlier. They are reviewed in Table... 

On treatment of N-methylpapaverine, formed by the lithium aluminum hydride reduction of papaverine methiodide with phosphoric acid, N-methylpavine is formed which is identical with the racemic alkaloid argemonine. This reaction was used for the synthesis of the alkaloid (-h)-coreximine (268) (174) and similar compounds containing the proto-berberine grouping in the molecule (269,270). 

Anet et al. ( 04) obtained in 1947 the alkaloids hygrine (191) and kusk-hygrine (192) in a very good yield by treatment of y-methylaminobutyralde-hyde with acetoacetic or acetonedicarboxylic acids at pH 7. The same reaction was later accomplished by Galinovsky et al. (305-307), who prepared the starting aldehyde by partial reduction of 1-methyl-2-pyrroli-done with lithium aluminum hydride. He used acetonedicarboxylic acid for the synthesis of both alkaloids and showed that a mixture of both alkaloids is formed, the composition of which depends on the ratio of components. 

An enamine was obtained in the synthesis of coronaridine (648) by aluminum hydride reduction of a bridged lactam, followed by dehydration on alumina. Additional examples of enamine formation by reduction of enamides (649) and thioenamides (650) were reported. 

LY311727 is an indole acetic acid based selective inhibitor of human non-pancreatic secretory phospholipase A2 (hnpsPLA2) under development by Lilly as a potential treatment for sepsis. The synthesis of LY311727 involved a Nenitzescu indolization reaction as a key step. The Nenitzescu condensation of quinone 4 with the p-aminoacrylate 39 was carried out in CH3NO2 to provide the desired 5-hydroxylindole 40 in 83% yield. Protection of the 5-hydroxyl moiety in indole 40 was accomplished in H2O under phase transfer conditions in 80% yield. Lithium aluminum hydride mediated reduction of the ester functional group in 41 provided the alcohol 42 in 78% yield. 

Synthesis of the CNS depressant/tranquil izer tioperidone (59) begins by alkylation of piperazine derivative with 4-chlorobutyronitrile to give Lithium aluminum hydride... 

Butyl alcohol in synthesis of phenyl 1-butyl ether, 46, 89 1-Butyl azidoacetate, 46, 47 hydrogenation of, 46, 47 1-Butyl chloroacetate, reaction with sodium azide, 46, 47 lre l-4-i-BUTYLCYCLOHEXANOL, 47,16 4-(-Butylcyclohexanonc, reduction with lithium aluminum hydride and aluminum chloride, 47, 17 1-Butyl hypochlorite, reaction with cy-clohexylamine, 46,17 l-Butylthiourea, 46, 72... 

---