Allylation reactions synthetic applications

The Sharpless-Katsuki asymmetric epoxidation (AE) procedure for the enantiose-lective formation of epoxides from allylic alcohols is a milestone in asymmetric catalysis [9]. This classical asymmetric transformation uses TBHP as the terminal oxidant, and the reaction has been widely used in various synthetic applications. There are several excellent reviews covering the scope and utility of the AE reaction... 

In addition to the synthetic applications related to the stereoselective or stereospecific syntheses of various systems, especially natural products, described in the previous subsection, a number of general synthetic uses of the reversible [2,3]-sigmatropic rearrangement of allylic sulfoxides are presented below. Several investigators110-113 have employed the allylic sulfenate-to-sulfoxide equilibrium in combination with the syn elimination of the latter as a method for the synthesis of conjugated dienes. For example, Reich and coworkers110,111 have reported a detailed study on the conversion of allylic alcohols to 1,3-dienes by sequential sulfenate sulfoxide rearrangement and syn elimination of the sulfoxide. This method of mild and efficient 1,4-dehydration of allylic alcohols has also been shown to proceed with overall cis stereochemistry in cyclic systems, as illustrated by equation 25. The reaction of trans-46 proceeds almost instantaneously at room temperature, while that of the cis-alcohol is much slower. This method has been subsequently applied for the synthesis of several natural products, such as the stereoselective transformation of the allylic alcohol 48 into the sex pheromone of the Red Bollworm Moth (49)112 and the conversion of isocodeine (50) into 6-demethoxythebaine (51)113. 

Enantiomencally pure (+)- and (-)-diphenylethylenediamines have recently been used for highly stereoselective Dlels-Alder, aldol,8 allylation,9 osmylation,10 and epoxidafion11 reactions. Other synthetic applications involve enantioselective Michael addition12 and asymmetric hydrogenation.13... 

The nonacarbonyldiiron-induced transformation of oxazabicyclo[2.2.2] octenes (12) into condensed azetidinones is intriguing mechanistically but will obviously have limited synthetic application (Scheme 15).37 The /(-lactam (14a), among other products, is isolated directly from the iron carbonyl reaction but the dimethyl analog (14b) is obtained by pyrolysis of an isolable intermediate <7-7r-allyl complex (13b). 

This chapter has introduced the aldol and related allylation reactions of carbonyl compounds, the allylation of imine compounds, and Mannich-type reactions. Double asymmetric synthesis creates two chiral centers in one step and is regarded as one of the most efficient synthetic strategies in organic synthesis. The aldol and related reactions discussed in this chapter are very important reactions in organic synthesis because the reaction products constitute the backbone of many important antibiotics, anticancer drugs, and other bioactive molecules. Indeed, study of the aldol reaction is still actively pursued in order to improve reaction conditions, enhance stereoselectivity, and widen the scope of applicability of this type of reaction. 

Examples of synthetic applications of these three principal reaction types can be illustrated by the TiCLt-catalyzed interaction of the allylamine 613 with 2-phenylpropanal 614 in refluxing toluene (equation 265)358 as well as by the ZnCl2 promoted rearrangement of N-allylated benzoyl substituted heterocyclic keteneaminals 615 (equation 266)359. 

Many of the recent advances in synthetic applications of allylic boron reagents have focused on the use of these reagents as key components of tandem reactions and one-pot sequential processes, including multicomponent reactions. The following examples briefly illustrate the range of possibilities. Most cases involve masked allylboronates as substrates, and the tandem process is usually terminated by the allylboration step. 

By far the most generally useful synthetic application of allyltributyltin is in the complementary set of transition metal- and radical-mediated substitution reactions. When the halide substrates are benzylic, allylic, aromatic or acyl, transition metal catalysis is usually the method of choice for allyl transfer from tin to carbon. When the halide (or halide equivalent) substrate is aliphatic or alicyclic, radical chain conditions are appropriate, as g-hydrogen elimination is generally not a problem in these cases. 

In 1980, Katsuki and Sharpless described the first really efficient asymmetric epoxidation of allylic alcohols with very high enantioselectivities (ee 90-95%), employing a combination of Ti(OPr-/)4-diethyl tartrate (DET) as chiral catalyst and TBHP as oxidant Stoichiometric conditions were originally described for this system, however the addition of molecular sieves (which trap water traces) to the reaction allows the epoxidation to proceed under catalytic conditions. The stereochemical course of the reaction may be predicted by the empirical rule shown in equations 40 and 41. With (—)-DET, the oxidant approaches the allylic alcohol from the top side of the plane, whereas the bottom side is open for the (-l-)-DET based reagent, giving rise to the opposite optically active epoxide. Various aspects of this reaction including the mechanism, theoretical investigations and synthetic applications of the epoxy alcohol products have been reviewed and details may be found in the specific literature . 

The major focus in this chapter will be on synthesis, with emphasis placed on more recent applications, particularly those where regiochemistry and stereochemistry are precisely controlled. The reader is referred to the earlier reviews for full mechanistic information and details of historic interest. Electrophilic addition of X—Y to an alkene, where X is the electrophile, gives products with functionality Y (3 to the heteroatom X. Further transformations of X and/or Y provide the basis for diverse synthetic applications. These transformations include replacement of Y by hydrogen, elimination to form a ir-bond (either including the carbon bonded to X or (3 to that carbon so that X is now in an allylic position), and nucleophilic or radical substitution. Representative examples of these synthetic methods will be given below. This chapter will include examples of heterocycles formed in one-pot reactions where the the initial alkene-electrophile adduct contains an electrophilic group that can react further. Examples of heterocycles formed in several steps from alkene-electrophile adducts will also be considered. Cases in which activation by an external electrophile directly results in addition of an internal heteroatom nucleophile are treated in Chapter 1.9 of this volume. 

A similar palladium-catalyzed cyclization procedure has recently been developed which involves enol ethers capable of (3-H elimination.373 Significant evidence has been accumulated suggesting that an oxa-ir-allyl complex is not an intermediate in these reactions, but that it is better characterized as an enolate addition to a Pdn-alkene complex.376 377 Synthetic applications of this reaction have also appeared.376-379... 

As noted in the introduction, in contrast to attack by nucleophiles, attack of electrophiles on saturated alkene-, polyene- or polyenyl-metal complexes creates special problems in that normally unstable 16-electron, unsaturated species are formed. To be isolated, these species must be stabilized by intramolecular coordination or via intermolecular addition of a ligand. Nevertheless, as illustrated in this chapter, reactions of significant synthetic utility can be developed with attention to these points. It is likely that this area will see considerable development in the future. In addition to refinement of electrophilic reactions of metal-diene complexes, synthetic applications may evolve from the coupling of carbon electrophiles with electron-rich transition metal complexes of alkenes, alkynes and polyenes, as well as allyl- and dienyl-metal complexes. Sequential addition of electrophiles followed by nucleophiles is also viable to rapidly assemble complex structures. 

The hallmark of Ti-tartrate catalyzed asymmetric epoxidation is the high degree of enantiofacial selectivity seen for a wide range of allylic alcohols. It is natural to inquire into what the mechanism of this reaction might be and what structural features of the catalyst produce these desirable results. These questions have been studied extensively, and the results have been the subject of considerable discussion [6,135,136]. For the purpose of this chapter, we review the aspects of the mechanistic-structural studies that may be helpful in devising synthetic applications of this reaction. 

Among 7i-allyl complexes of several transition metals, the chemistry of n-allylpalladium has been studied most extensively. From the standpoint of organic synthesis, reactions involving 7i-allylpalladium complexes are by far the most important therefore, their synthetic applications are mainly treated in this chapter. 

The in situ regeneration of Pd(II) from Pd(0) should not be counted as being an easy process, and the appropriate solvents, reaction conditions, and oxidants should be selected to carry out smooth catalytic reactions. In many cases, an efficient catalytic cycle is not easy to achieve, and stoichiometric reactions are tolerable only for the synthesis of rather expensive organic compounds in limited quantities. This is a serious limitation of synthetic applications of oxidation reactions involving Pd(II). However it should be pointed out that some Pd(II)-promoted reactions have been developed as commercial processes, in which supported Pd catalysts are used. For example, vinyl acetate, allyl acetate and 1,4-diacetoxy-2-butene are commercially produced by oxidative acetoxylation of ethylene, propylene and butadiene in gas or liquid phases using Pd supported on silica. It is likely that Pd(OAc)2 is generated on the surface of the catalyst by the oxidation of Pd with AcOH and 02, and reacts with alkenes. 

To document the synthetic applicability of these reactions, N-N bond cleavage was needed. After trifluoroacetylation of 36a (Scheme 9) under microwave irradiation [106-108], exposure to Sml2 smoothly furnished known y-aminoester 43 and offered proof of absolute configuration (allylation of the a-carbon of 15 established correlation with a known derivative [109]). 

For a comprehensive review of synthetic applications of asymmetric boron allylation reactions, see Chemler, S. R. Roush, W. R. in Modem Carbonyl Chemistry Otera, J., Ed. Wiley-VCH Weinheim, Germany, 2000 Chapt. 11. 

Sulfoximines are versatile reagents for diastereoselective and asymmetric synthesis. They continue to find many synthetic applications as both nucleophilic and electrophilic reagents. While the nucleophilic character of sulfoximine reagents has been well exploited,1 the use of the sulfoximine group as a nucleofuge is more recent and adds to the synthetic use of these compounds. The palladium(0)-catalyzed chemistry of allylic sulfoximines and the use of chiral sulfoximines as ligands in catalytic asymmetric synthesis are areas of recent development that have potentially useful applications. Further work is required to understand the factors that determine the diastereoselection and the stereochemical outcomes of these reactions. These studies will result in enhanced product diastereo- and enantioselectivities and make these reagents even more attractive to the wider synthetic chemistry community. 

Several synthetic applications of these intermediates have been reported by J. F. Normant and coworkers. For instance, trifluorovinyllithium reacts with carbonyl compounds in the usual manner to give carbinols. When treated with concentrated sulfuric acid these primary adducts undergo allylic rearrangement to the corresponding acid fluorides which, in turn, can be converted to acids, esters or amides as outlined by reaction sequence (50) ... 

---