Allylamines vinylation

Type III (no homodimerization) Acrylonitrile," protected 3° allylamines" Vinyl trialkoxysilanes, vinyl siloxanes 1,1-Disubstituted olefins, " non-bulky trisubstituted olefms, vinyl phosphonates, " vinyl phosphine oxides,phenyl vinyl sulfone, acrylonitrile, 4° allylic carbons (all alkyl substituents), protected 3° allylic alcohols, 7,Aolefm of 2-subst. 1.3- butadienes, 7,Aolefin of electronically deactivated 1.3- butadienes ... 

The carbopalladation of allylamine with malonate affords the chelating complex 510, which undergoes insertion of methyl vinyl ketone to form the amino enone 511[463]. The allylic sulfide 512 has the same chelating effect to give the five-membered complex 513 by carbopalladation[463.464]. 

Allylamines are not easily cleaved with Pd catalysts, but the carbonylation of the allylic amine 395 proceeds at 110 C to give the /3,7-unsaturated amide 396 by using dppp as a ligand[252], Dccarboxylation-carbonylation of allyl diethyl-carbamate under severe conditions (100 C, 80 atm) affords /3,7-unsaturated amides[2531. The 3-vinylaziridine 397 is converted into the a-vinyl-J-lactam 398 under mild conditions[254]. 

Radical cyclization is compatible with the presence of other functional groups. Treatment of XCH2CON(R)-C(R )=CH2 derivatives (X = Cl, Br, 1) with Ph3SnH and AIBN led to formation of a lactam via radical cyclization. " Cyclization of N-iodoethyl-5-vinyl-2-pyrrolidinone led to the corresponding bicyclic lactam, " and there are other examples of radical cyclization with molecules containing a lactam unit " or an amide unit. Radical cyclization occurs with enamines as well. Photochemical irradiation of A,A-dialIyl acrylamide leads to formation of a lactam ring, and in this case thiophenol was added to generate the phenylthio derivative. Phenylseleno N-allylamines lead to cyclic amines. co-Iodo acrylate esters cyclize to form lactones. " ... 

The rearrangement of unsymmetrical allylamines 9 was investigated to exclude any competing 1,3-rearrangement during the course of the reaction. Allyl vinyl amines 10 were generated via condensation starting from allylamine 9 and isobutyraldehyde 2. The substrates 10 were subjected to the acid-accel-... 

Method D in Table 1 represents a case where dry support films were always used because of the need to employ a vacuum and because of the very nature of plasma deposition processes. Yasuda (12) showed that a wide variety of gas phase reactants could be used in this technique. Not only conventional vinyl monomers were used but also any organic compounds with adequate vapor pressure. Further, copolymers could be prepared by introduction of a second reactant such as nitrogen. Wydeven and coworkers (13,14) showed the utility of this method in preparing reverse osmosis membranes from an allylamine plasma. 

A cell with a small Pt disk working electrode coated with a polyelectrolyte multilayer made of poly(allylamine)-poly(vinyl sulfate), a Pt wire counterelectrode and a reference SCSE may be used for selective amperometric determination of H2O2, in the presence of ascorbic acid (22), uric acid (29) and acetaminophen (148). The latter three compounds show a significant response with the bare working electrode at +0.6 V while a practically nil one with the coated electrode. The reason for this selectivity may be an exclusion effect by the coating. ... 

Carbonyl reagents, such as semicarbazide and phenelzine (27), are inactivators of SSAO. In a strategy that includes two inactivating structural motifs (allylamine and hydrazine), a series of allyl hydrazines including the series 28a-c as well as the fluoroallyl analogue 29 were prepared. Compounds 28a-c were potent irreversible inhibitors of SSAO, and compounds 28a,c had particularly good selectivity with respect to MAO inhibition. The presence of the vinyl fluoride in 29 had little effect on potency but did result in a loss in selectivity [82]. 

Type IV (spectators to CM) 1,1-Disubstituted olefms " 1,1-Disubstituted olefms, disub. o ,/ -unsaturated carbonyls, 4° allylic carbon-containing olefins, perfluorinated alkane olefins, 3° allylamines (protected)" Vinyl nitro olefins, protected trisubstituted allyl alcohols, a,/ -olefin of 2-subst. 1.3- butadienes, a,/ -olefm of electronically deactivated 1.3- butadienes ... 

Chemicals which can damage (a) the liver include carbon tetrachloride, paracetamol, bromobenzene, isoniazid, vinyl chloride, ethionine, galactosamine, halothane, dimethyl-nitrosamine (b) the kidney include hexachlorobutadiene, cadmium and mercuric salts, chloroform, ethylene glycol, aminoglycosides, phenacetin (c) the lung include paraquat, ipomeanol, asbestos, monocrotaline, sulfur dioxide, ozone, naphthalene (d) the nervous system include MPTP, hexane, organophosphoms compounds, 6-hydroxydopamine, isoniazid (e) the testes include cadmium, cyclophosphamide, phthalates, ethanemethane sulfonate, 1,3-dinitrobenzene (f) the heart include allylamine, adriamycin, cobalt, hydralazine, carbon disulfide (g) the blood include nitrobenzene, aniline, phenyl-hydrazine, dapsone. 

First by mixing poly(vinyl alcohol) PVA (Kuraray 117H Mw 74800 saponification 99.6%), poly(acrylic acid) PAA (SP2 Mw 170000), and poly(allylamine) hydrochloride PAlAm.HCl (Nittobo Mw 60000) a homogeneous aqueous solution of PVA PAA PAlAm was obtained at concentrations of... 

The cyclization of carbamate derivatives of unsaturated amines has proven synthetically useful. Cyclizations of carbamates of allylamines containing a terminal vinyl group give oxazolidinone products (equation 60 and Table 17, entries 1 and 2).99,161 Bromocyclizations of systems with a di- or tri-sub-stituted alkene often give mixtures of oxazolidinones and tetrahydrooxazinones,163 while cyclization of an A -cinnamyl carbamate with phenylsulfenyl chloride gave only the oxazolidinone product.163b,163c The stereochemistry of the cyclization of primary carbamates of either allylic or homoallylic amines is low... 

Catalysis by acids, which is only rarely effective for aliphatic amines but better suited to the less basic aromatic amines [334], can promote nucleophilic attack at the most strongly polarized C-0 bond of the epoxide (Scheme 4.75) [333, 334, 339]. Vinyl epoxides react with amines in the presence of Pd(0) under mild conditions to yield allylamines [340], If such reactions are performed in the presence of an enantiomerically pure ligand, racemic vinyl epoxides can be converted into enantiomerically enriched products of nucleophilic ring opening (last example, Scheme 4.75). 

Structural studies on the mechanism of the THF-catalyzed vinylic lithiation of allylamine derivatives have been performed using 2D and diffusion-ordered NMR spectroscopy.10 NMR evidence has suggested that in THF the mixed aggregate has close contact between the alkene and the /S-CfG of n-BuLi, whereas in the absence of THF, the allyl chain appears to be pointed away from the nearest n-BuLi residues. 

The preparation of chiral, non-racemic pyrrolidines from enantiomerically-enriched vinyl epoxides has been reported <02SL731, 02JOC7774> (Scheme 14). In like fashion, the addition of allylamine to the enantiomerically-enriched epoxide 22 gives diol 23 which can be transformed into the proline analog 24 by a sequence of steps including RCM <02JOC6896>. 

The first mention of the a(x) dependence was in experimental work [265], The dielectric relaxation data of water in mixtures of seven water-soluble polymers was presented there. It was found that in all these solutions, relaxation of water obeys the CC law, while the bulk water exhibits the well-known Debye-like pattern [270,271], Another observation was that a is dependent not only on the concentration of solute but also on the hydrophilic (or hydrophobic) properties of the polymer. The seven polymers were poly(vinylpyrrolidone) (PVP weight average molecular weight (MW) = 10,000), poly (ethylene glycol) (PEG MW = 8000), poly(ethylene imine) (PEI MW = 500,000), poly(acrylic acid) (PAA MW = 5000), poly(vinyl methyl ether) (PVME MW = 90,000), poly(allylamine) (PA1A MW = 10,000), and poly(vinyl alcohol) (PVA MW = 77,000). These polymers were mixed with different ratios (up to 50% of polymer in solution) to water and measured at a constant room temperature (25°C) [265]. 

Olefin isomerization catalyzed by ruthenium alkylidene complexes can be applied to the deprotection of allyl ethers, allyl amines, and synthesis of cyclic enol ethers by the sequential reaction of RCM and olefin isomerization. Treatment of 70 with allyl ether affords corresponding vinyl ether, which is subsequently converted into alcohol with an aqueous HCl solution (Eq. 12.37) [44]. In contrast, the allylic chain was substituted at the Cl position, and allyl ether 94 was converted to the corresponding homoallylic 95 (Eq. 12.38). The corresponding enamines were formed by the reaction of 70 with allylamines [44, 45]. Selective deprotection of the allylamines in the presence of allyl ethers by 69 has been observed (Eq. 12.39), which is comparable with the Jt-allyl palladium deallylation methodology. This selectivity was attributed to the ability of the lone pair of the nitrogen atom to conjugate with a new double bond of the enamine intermediate. 

On the other hand, sterically crowded allylamine 21 was cyclopropanated giving 22 in spite of the two vinylic chlorine atoms which deactivate the double bond to the attack of dichlorocarbene (see also Houben-Weyl, Vol. E19b, pl555). 

Prior chapters have covered the use of transition metals in asymmetric hydrogenations ( 6.2 and 7.1), hydroborations ( 7.3), hydrosilylations and hydro-cyanations ( 6.3, 6.4, 7.4 and 7.5), cyclopropanations ( 7.19), aldol reactions ( 6.11), allylations of carbanions ( 5.3.2), and some sigmatropic rearrangements ( 10.3). This chapter covers other reactions catalyzed by transition metal complexes including coupling of organometallic reagents with vinyl, aryl or allyl derivatives, Heck reactions allylamine isomerizations, some allylation reactions, car-bene insertions into C-H bonds and Pauson-Khand reactions. 

As discussed before, the borderline between polysoaps and polyelectrolytes or thickeners is determined by the hydrophilic-hydrophobic balance HLB, as well as by the length and the density of the hydrophobic tails chosen. The longer they are, the lower is the content of hydrophobic tails - the Critical Alkyl Group Content CAC [52, 75] - needed in order to produce polysoap behaviour (cf. Sect. 2.3.2). For poly(2-vinylpyridine) and poly(4-vinylpyridine), about 20% of derivatization with octyl tails and about 10% of derivatization with dodecyl tails are needed as a minimum to obtain the characteristic low viscosities [49, 52, 75, 133, 141, 317] (Fig. 17). Comparable CAC values are obtained for derivatized poly(vinyl-imidazol)s [140] and for poly(allylamine)s [152]. Similarly in anionic copolymers of poly(sodium 2-acrylamido-2-... 

Mercapto-3-pentanone and other thiols have also been added to styrene, 2-methyl-2-butene, 1-methyl-1-cyclohexene, and olefins containing functional groups38 such as vinyl chloride, 1-chlorocyclohexene, 2-chlorocrotonaldehyde, allylamine, allyl alcohol, bromide and chloride, and cinnamyl alcohol. 

---