Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkylation with alkyl amines

Relative rates of alkylation of toluene and benzene using a mixture of nitro-sonium hexafluorophosphate, nitromethane (or acetonitrile) and aliphatic amine as the alkylations agent have been determined at 25 °C as follows360 1.5 (ethyl-amine), 2.5 (i-propylamine) and 3.5 (benzylamine) nothing more as yet is known about the kinetics of alkylation with these new alkylating reagents. [Pg.152]


Under appropriate conditions 2-amino-4-alkylthiazoles are alkylated in the 5-position 2-acetylamino-4-methylthiazole reacts with dimethyl-amine and formaldehyde to afford the corresponding Mannich base (113) (372). 2-Amino-4-methyl-thiazole is alkylated in the 5-position by heat-... [Pg.103]

Semipermanent hair color products are formulated at an alkaline pH, usually between 8.5 and 10. At this pH the cuticle of the hair lifts away from the hair a Httie, allowing for easier penetration of dye. An alkyl amine buffered with an organic acid normally is used to obtain the desired pH. The formulations contain a mixture of solvents and surfactants to solubilize the dyes and a thickening agent is added so that the product stays on the hair without mnning or dripping. A 20—30 min appHcation time is normal for this type of product. A representative formula for a semipermanent dye product is given in Table 7. [Pg.456]

Refluxing linoleic acid and a primary or secondary alkyl amine with -toluenesulfonic acid in toluene for 8—18 h also yields the substituted amides (32—34). The reaction of methyl esters with primary or secondary amines to make substituted amides is catalyzed with sodium methoxide. Reactions are rapid at 30°C under anhydrous conditions (35). Acid chlorides can also be used. Ai,A/-dibutyloleamide [5831-80-17 has been prepared from oleoyl chloride and dibutyl amine (36). [Pg.184]

Wetting times of /V,/V-dimethy1-/ -alkyl amine oxides as a function of the alkyl chain length show a minimum with dimethyl dodecyl amine oxide (Table 3). Foam generation of dimethyl-/ -alkylamine oxides solutions show a maximum when the alkyl group contains 14 carbons. [Pg.189]

All lation. Alkylating agents such as diaLkyl sulfates and alkyl hahdes react with ahphatic amine oxides to form trialkylalkoxyammonium quaternaries. For example (33), methyl iodide reacts with trimethyl amine oxide to form trimethylmethoxyammonium iodide... [Pg.190]

In addition to the nitrile and alcohol routes for fatty amine preparation, processes have been described by Unocal and Pennwalt Corporation, using an olefin and secondary amine (14—16) by Texaco Inc., hydrogenation of nitroparaffins (17—20) by Onyx Corporation, reaction of an alkyl haUde with secondary amines (21,22) by Henkel Cie, GmbH, reduction of an ester in the presence of a secondary amine (23) by catalytic hydroammonolysis of carboxyhc acids (24) and by the Hofmann rearrangement (25). [Pg.220]

The 4,4 -MDA is sold commercially with a diamine assay of 98 —99%. The major impurity is the 2,4 -MDA isomer, which can be present in amounts up to 3%. PMDA products are normally defined by hydrogen equivalent weight and viscosity. Typical products exhibit a 50 hydrogen equivalent weight and a viscosity of 80 140 mPa-s(=cP) at 70°C. PMDA products normally contain, in addition to the isomers and oligomers of MDA, small amounts of aniline, water, chlorides, and various alkylated amines. AH MDA products should be stored in sealed containers in a cool dry area. [Pg.250]

Contaminants and by-products which are usually present in 2- and 4-aminophenol made by catalytic reduction can be reduced or even removed completely by a variety of procedures. These include treatment with 2-propanol (74), with aUphatic, cycloaUphatic, or aromatic ketones (75), with aromatic amines (76), with toluene or low mass alkyl acetates (77), or with phosphoric acid, hydroxyacetic acid, hydroxypropionic acid, or citric acid (78). In addition, purity may be enhanced by extraction with methylene chloride, chloroform (79), or nitrobenzene (80). [Pg.311]

Ethoxylation of alkyl amine ethoxylates is an economical route to obtain the variety of properties required by numerous and sometimes smaH-volume industrial uses of cationic surfactants. Commercial amine ethoxylates shown in Tables 27 and 28 are derived from linear alkyl amines, ahphatic /-alkyl amines, and rosin (dehydroabietyl) amines. Despite the variety of chemical stmctures, the amine ethoxylates tend to have similar properties. In general, they are yellow or amber Hquids or yellowish low melting soHds. Specific gravity at room temperature ranges from 0.9 to 1.15, and they are soluble in acidic media. Higher ethoxylation promotes solubiUty in neutral and alkaline media. The lower ethoxylates form insoluble salts with fatty acids and other anionic surfactants. Salts of higher ethoxylates are soluble, however. Oil solubiUty decreases with increasing ethylene oxide content but many ethoxylates with a fairly even hydrophilic—hydrophobic balance show appreciable oil solubiUty and are used as solutes in the oil phase. [Pg.256]

Cl Disperse Blue 87 (107) and related dyestuffs are also prepared from l-oxo-3-imino-4,7-diamino-5,6-phthaloyhsoiQdoline [13418-50-3] (111) by alkylation with corresponding alkyl haUdes (122), sulfonic esters (123), or alkyl amines (124), ie, X of RX = halogen, -toluenesulfonyloxy, or NH2. [Pg.322]

One of the best leaving groups is molecular nitrogen in alkyl diazonium ions. Diazonium ions are generated by nitrosation of primaiy amines. The diazonium ions generated from alkyl amines are veiy unstable and immediately decompose with loss of nitrogen. [Pg.298]

Alkyl derivatives such as 1,4-S6(NR)2 and S4(NR)4 can be synthesized by reacting S2CI2 with primary amines RNH2 in an inert solvent. Compounds such as 1,4-S2(NR)4 (R = —C02Et) are now also well characterized.The bis-adduct [Ag(S4N4H4)2]" " has been isolated as its perchlorate this has a sandwich-like structure and is unique in being S-bonded rather than N-bonded to the metal ion. ... [Pg.736]

The Zincke reaction is an overall amine exchange process that converts N- 2,A-dinitrophenyl)pyridinium salts (e.g, 1), known as Zincke salts, to iV-aryl or iV-alkyl pyridiniums 2 upon treatment with the appropriate aniline or alkyl amine. The Zincke salts are produced by reaction of pyridine or its derivatives with 2,4-dinitrochlorobenzene. This venerable reaction, first reported in 1904 and independently explored by Konig, proceeds via nucleophilic addition, ring opening, amine exchange, and electrocyclic reclosure, a sequence that also requires a series of proton transfers. By... [Pg.355]

The A-substituted derivatives of 4-oxo-4//-pyrido[l,2-n]pyrimidine-3-carboxamides and -3-acetamides and l,6-dimethyl-4-oxo-1,6,7,8-tetrahy-dro-4//-pyrido[l,2-n]pyrimidine-3-carboxamide were prepared by treatment of the appropriate 3-carboxylic acids and acetic acid, first with an alkyl chloroformate in the presence ofNEt3 in CHCI3 below — 10°C, then with an amine (98ACH515). A-Phenethyl and A-[2-(3,4-dimethoxyphenyl)ethyl] derivatives of 6-methyl-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetamide were obtained in the reaction of 6-methyl-6,7,8,9-tetrahydro-4//-pyrido[l,2-n]pyrimidine-3-acetic acid and phenethylamines in boiling xylene under a H2O separator. Hydrazides of 4-oxo-4//- and 4-oxo-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetic acid were prepared from the appropriate ester with H2NNH2 H2O in EtOH. Heating 4-oxo-4//- and 6-methyl-4-oxo-6,7,8,9-tetrahydro-4//-pyrido[l, 2-n]pyrimidine-3-acetic hydrazides in EtOH in the presence of excess Raney Ni afforded fhe appropriafe 4-oxo-6,7,8,9-fefrahydro-4//-pyrido[l,2-n]pyrimidine-3-acefa-mide. In the case of the 4-oxo-4// derivative, in addition to N-N bond... [Pg.216]

Modification of the synthesis of the side chain by reaction of 73 with isopropyl amine rather than diethylamine gives eventually the haloamine, 94. Alkylation of the aminoquinoline (92)... [Pg.345]

A phenyl ethanol amine in which the nitrogen is alkylated by a long chain alphatic group departs in activity from the prototypes. This agent, suloctidil (43) is described as a peripheral vasodilator endowed with platelet antiaggregatory activity. As with the more classical compounds, preparation proceeds through bromination of the substituted propiophen-one ( ) and displacement of halogen with octyl amine. Reduction, in this case by means of sodium borohydride affords suloctidil (43). ... [Pg.26]

In the case of ions, the repulsive interaction can be altered to an attractive interaction if an ion of opposite charge is simultaneously adsorbed. In a solution containing inhibitive anions and cations the adsorption of both ions may be enhanced and the inhibitive efficiency greatly increased compared to solutions of the individual ions. Thus, synergistic inhibitive effects occur in such mixtures of anionic and cationic inhibitors . These synergistic effects are particularly well defined in solutions containing halide ions, I. Br , Cl", with other inhibitors such as quaternary ammonium cations , alkyl benzene pyridinium cations , and various types of amines . It seems likely that co-ordinate-bond interactions also play some part in these synergistic effects, particularly in the interaction of the halide ions with the metal surfaces and with some amines . [Pg.809]


See other pages where Alkylation with alkyl amines is mentioned: [Pg.152]    [Pg.49]    [Pg.724]    [Pg.953]    [Pg.228]    [Pg.383]    [Pg.192]    [Pg.311]    [Pg.431]    [Pg.317]    [Pg.342]    [Pg.130]    [Pg.794]    [Pg.831]    [Pg.887]    [Pg.551]    [Pg.93]    [Pg.444]    [Pg.81]    [Pg.475]    [Pg.532]    [Pg.57]    [Pg.355]    [Pg.83]    [Pg.118]    [Pg.205]    [Pg.381]    [Pg.206]    [Pg.212]    [Pg.103]    [Pg.188]    [Pg.111]    [Pg.941]    [Pg.958]    [Pg.119]   


SEARCH



Alkyl with amines

Alkylative amination

Amines alkylation

© 2024 chempedia.info