Bromides alkyl

Alkyl fluorides may be prepared in moderate yield by interaction of an alkyl bromide with anhydrous potassium fluoride in the presence of dry ethylene glycol as a solvent for the inorganic fluoride, for example ... 

Mix 40 g. (51 ml.) of isopropyl alcohol with 460 g. (310 ml.) of constant boiling point hydrobromic acid in a 500 ml. distilling flask, attach a double surface (or long Liebig) condenser and distil slowly (1-2 drops per second) until about half of the liquid has passed over. Separate the lower alkyl bromide layer (70 g.), and redistil the aqueous layer when a further 7 g. of the crude bromide will be obtained (1). Shake the crude bromide in a separatory funnel successively with an equal volume of concentrated hydrochloric acid (2), water, 5 per cent, sodium bicarbonate solution, and water, and dry with anhydrous calcium chloride. Distil from a 100 ml. flask the isopropyl bromide passes over constantly at 59°. The yield is 66 g. 

Owing to the comparatively negligible difference in the cost of bromine and the equivalent quantity of constat boiling point hydrobromio acid, there is little to be gained—apart from the instructional value—in preparing the hydrobromio acid from bromine in the preparation of alkyl bromides. 

S-Alkyl-iso-thiuronium picrates. Alkyl bromides or iodides react with thiourea in alcoholic solution to produce S-alkyl-iso-thiuronium salts, which yield picrates of sharp melting point ... 

Place a mixture of 0-5 g. of finely powdered thiourea, 0-5 g. of the alkyl halide and 5 ml. of alcohol in a test-tube or small flask equipped with a reflux condenser. Reflux the mixture for a j)eriod depending upon the nature of the halide primary alkyl bromides and iodides, 10-20 minutes (according to the molecular weight) secondary alkyl bromides or iodides, 2-3 hours alkyl chlorides, 3-5 hours polymethy lene dibromides or di-iodides, 20-50 minutes. Then add 0 5 g. of picric acid, boil until a clear solution is obtained, and cool. If no precipitate is obtained, add a few drops of water. RecrystaUise the resulting S-alkyl-iso-thiuronium picrate from alcohol. 

A better method involves the interaction of an alkyl bromide and thiourea to form an alkyl tso-thiourea, followed by hydrolysis of the latter with sodium hydroxide solution, for example ... 

Pure dialkylanilines may be prepared by refluxing the monoalkylaniline (1 mol) with an alkyl bromide (2 mols) for 20-30 hours the solid product is treated with excess of sodium hydroxide solution, the organic layer separated, dried and distilled. The excess of alkyl bromide paases over first, followed by the dialkylaniline. Di-n-propylaniline, b.p. 242-243°, and di-n-butylaniline b.p. 269-270°, are thus readily prepared. 

It is of interest to note that by substituting alkyl bromides for cyciohexyl bromide the corresponding a-phenyl-a-alkyl-acetonitriles are obtained, which may be hydrolysed to the a-phenylaliphatic acids thus with ethyl iodide a-phenyl-lwt3Tonitrile is produced, hydrolysed by ethanoUo potassium hydroxide to a-phenylbutyric acid. 

Other alkylbenzenes may be prepared similarly by using the appropriate primary or secondary alkyl bromide. 

Alkylbenzenes are also obtained (but in somewhat lower yield) from phenyl-sodium and alkyl bromides. Thus ethylbenzene is produced from phenyl-sodium and ethyl bromide ... 

Further development How would you make TM 413 using the alkyl bromide you have just made This molecule is obviously on the way to a steroid and you can read more about it in Helv. Chim. Acta.. 1947, 3 1422 and J. Amer. Chem. Soc.. 1942, 974. 

Alkvl Azides from Alkyl Bromides and Sodium Azide General procedure for the synthesis of alkyl azides. In a typical experiment, benzyl bromide (360 mg, 2.1 mmol) in petroleum ether (3 mL) and sodium azide (180 mg, 2.76 mmol) in water (3 mL) are admixed in a round-bottomed flask. To this stirred solution, pillared clay (100 mg) is added and the reaction mixture is refluxed with constant stirring at 90-100 C until all the starting material is consumed, as obsen/ed by thin layer chromatographv using pure hexane as solvent. The reaction is quenched with water and the product extracted into ether. The ether extracts are washed with water and the organic layer dried over sodium sulfate. The removal of solvent under reduced pressure affords the pure alkyl azides as confirmed by the spectral analysis. ... 

The lithiation of allene can also be carried out with ethyllithium or butyl-lithium in diethyl ether (prepared from the alkyl bromides), using THF as a cosolvent. The salt suspension which is initially present when the solution of alkyllithium is cooled to -50°C or lower has disappeared almost completely when the reaction between allene and alkyllithium is finished. 

The alkylations proceeded much more slowly, when ethyl- or butyllithium in diethyl ether, prepared from the alkyl bromides, had been used for the metallation of allene, in spite of the presence of THF and HMPT as co-solvents. 

Alkylation of the dilithiated sulfide can be performed by adding at -10°C 0.12 mol of an alkyl bromide, allowing the temperature to rise to 20-30°C and hydrolyzing the reaction mixture after stirring for an additional 45 min at about 25°C. 

Note 1. Butyl- or ethyllithium in diethyl ether, prepared from the alkyl bromide, contains LiBr, which may react with chlorine to form bromine, so that RCeC-Br will also be formed. 

Lithium l,3-dithian-2-ides (p. 6, 8) may be alkylated with alkyl bromides or iodides. Steric hindrance is usually of little importance and the resulting ketone can be easily liberated by hydrolysis (D. Seebach, 1969). 

Anions of allylic thioethers may also be alkylated with alkyl bromides in high yield. The thioether groups can subsequently be removed by hydrogenolysis (F.W. Sum, 1979). 

The only common synthons for alkynes are acetylide anions, which react as good nucleophiles with alkyl bromides (D.E. Ames, 1968) or carbonyl compounds (p. 52, 62f.). 

Nickel-allyl complexes prepared from Ni(CO)4 and allyl bromides are useful for the ole-fination of alkyl bromides and iodides (E.J. Corey, 1967 B A.P. Kozikowski, 1976). The reaction has also been extended to the synthesis of macrocycles (E.J. Corey, 1967 C, 1972A). 

The synthesis of these disubstituied thioureas takes place in three steps. First the alkyl bromide is prepared by the action of hydrobromic acid on the corresponding alcohol (518). Then the dialkylcyanamide is obtained by treatment at 25°C with calcium cyanamide. The yields are of the order of 30 to 60%. Thioureas are obtained in a third step from the cyanamide by reaction at 40 C with HjS in the presence of pyridine. Yields ranged from 57 to 90% (518),... 

Density Alkyl fluorides and chlorides are less dense and alkyl bromides and iodides more dense than water... 

Phosphorus tnbromide reacts with alcohols to give alkyl bromides and phospho rous acid... 

Bromination is normally used only to prepare tertiary alkyl bromides from alkanes... 

Reaction of alcohols with phosphorus tribromide (Section 4 13) As an alternative to converting alco hols to alkyl bromides with hydrogen bromide the inorganic reagent phosphorus tribromide is some times used... 

Select the compound in each of the following pairs that will be converted to the corre spending alkyl bromide more rapidly on being treated with hydrogen bromide Explain the reason for your choice... 

Give the structures of two different alkyl bromides both of which yield the indicated alkene as the exclusive product of E2 elimination... 

A secondary alkyl radical is more stable than a primary radical Bromine therefore adds to C 1 of 1 butene faster than it adds to C 2 Once the bromine atom has added to the double bond the regioselectivity of addition is set The alkyl radical then abstracts a hydrogen atom from hydrogen bromide to give the alkyl bromide product as shown m... 

Compound A (C7Hi5Br) is not a primary alkyl bromide It yields a single alkene (compound B) on being heated with sodium ethoxide in ethanol Hydrogenation of compound B yields 2 4 dimethylpentane Identify compounds A and B... 

The order of alkyl halide reactivity in nucleophilic substitutions is the same as their order m eliminations Iodine has the weakest bond to carbon and iodide is the best leaving group Alkyl iodides are several times more reactive than alkyl bromides and from 50 to 100 times more reactive than alkyl chlorides Fluorine has the strongest bond to car bon and fluonde is the poorest leaving group Alkyl fluorides are rarely used as sub states m nucleophilic substitution because they are several thousand times less reactive than alkyl chlorides... 

There are very large differences m the rates at which the various kinds of alkyl halides— methyl primary secondary or tertiary—undergo nucleophilic substitution As Table 8 2 shows for the reaction of a series of alkyl bromides... 

Reactivity of Some Alkyl Bromides Toward Substitution by the Sn2 Mechanism ... 

Alkyl bromide Structure Class Relative rate ... 

---