Alkene catalyzed reactions

Alkylation combines lower-molecular-weight saturated and unsaturated hydrocarbons (alkanes and alkenes) to produce high-octane gasoline and other hydrocarbon products. Conventional paraffin-olefin (alkane-alkene) alkylation is an acid-catalyzed reaction, such as combining isobutylene and isobutane to isooctane. 

Palladation of aromatic compounds with Pd(OAc)2 gives the arylpalladium acetate 25 as an unstable intermediate (see Chapter 3, Section 5). A similar complex 26 is formed by the transmetallation of PdX2 with arylmetal compounds of main group metals such as Hg Those intermediates which have the Pd—C cr-bonds react with nucleophiles or undergo alkene insertion to give oxidized products and Pd(0) as shown below. Hence, these reactions proceed by consuming stoichiometric amounts of Pd(II) compounds, which are reduced to the Pd(0) state. Sometimes, but not always, the reduced Pd(0) is reoxidized in situ to the Pd(II) state. In such a case, the whole oxidation process becomes a catalytic cycle with regard to the Pd(II) compounds. This catalytic reaction is different mechanistically, however, from the Pd(0)-catalyzed reactions described in the next section. These stoichiometric and catalytic reactions are treated in Chapter 3. 

As a unique reaction of Pd(II), the oxidative carbonylation of alkenes is possible with Pd(ll) salts. Oxidative carbonylation is mechanistically different from the hydrocarboxylation of alkenes catalyzed by Pd(0), which is treated in Chapter 4, Section 7.1. The oxidative carbonylation in alcohol can be understood in the following way. The reaction starts by the formation of the alkoxy-carbonylpalladium 218. Carbopalladation of alkene (alkene insertion) with 218 gives 219. Then elimination of /3-hydrogen of this intermediate 219 proceeds to... 

Chlorobenzene reacts with alkenes with bimetallic catalyses of Ni and Pd. Chlorobenzene is converted in situ into iodobenzene (14) by the Ni-cataiyzed reaction of Nal at 140 "C. NiBr2, rather than the Ni(0) complex, is found to be a good catalyst. Then the Pd-catalyzed reaction of the iodobenzene with acrylate takes place) 15]. 

Stereoselective and chemoselective semihydrogenation of the internal alkyne 208 to the ew-alkene 210 is achieved by the Pd-catalyzed reaction of some hydride sources. Tetramethyldihydrosiloxane (TMDHS) (209) i.s used in the presence of AcOH[116]. (EtO)3SiH in aqueous THF is also effective for the reduction of alkynes to di-alkenes[l 17], Semihydrogenation to the d.v-alkene 211 is possible also with triethylammonium formate with Pd on carbon[118]. Good yields and high cis selectivity are obtained by catalysis with Pd2fdba)3-Bu3P[119],... 

The enzyme catalyzed reactions that lead to geraniol and farnesol (as their pyrophosphate esters) are mechanistically related to the acid catalyzed dimerization of alkenes discussed m Section 6 21 The reaction of an allylic pyrophosphate or a carbo cation with a source of rr electrons is a recurring theme m terpene biosynthesis and is invoked to explain the origin of more complicated structural types Consider for exam pie the formation of cyclic monoterpenes Neryl pyrophosphate formed by an enzyme catalyzed isomerization of the E double bond m geranyl pyrophosphate has the proper geometry to form a six membered ring via intramolecular attack of the double bond on the allylic pyrophosphate unit... 

Experiments show that both alkenes and ketones undergo acid-catalyzed reactions. Alkene reactions usually require use of a very strong acid, H2SO4 or HX, while ketone reactions occur under milder conditions. This suggests that ketones are stronger bases, and that their conjugate acids enjoy special stabilization. 

Scheeren et al. reported the first enantioselective metal-catalyzed 1,3-dipolar cycloaddition reaction of nitrones with alkenes in 1994 [26]. Their approach involved C,N-diphenylnitrone la and ketene acetals 2, in the presence of the amino acid-derived oxazaborolidinones 3 as the catalyst (Scheme 6.8). This type of boron catalyst has been used successfully for asymmetric Diels-Alder reactions [27, 28]. In this reaction the nitrone is activated, according to the inverse electron-demand, for a 1,3-dipolar cycloaddition with the electron-rich alkene. The reaction is thus controlled by the LUMO inone-HOMOaikene interaction. They found that coordination of the nitrone to the boron Lewis acid strongly accelerated the 1,3-dipolar cycloaddition reaction with ketene acetals. The reactions of la with 2a,b, catalyzed by 20 mol% of oxazaborolidinones such as 3a,b were carried out at -78 °C. In some reactions fair enantioselectivities were induced by the catalysts, thus, 4a was obtained with an optical purity of 74% ee, however, in a low yield. The reaction involving 2b gave the C-3, C-4-cis isomer 4b as the only diastereomer of the product with 62% ee. 

It has been more difficult to obtain the exo isomer in the above described reaction. Application of the TiCl2-TADDOLate complex induced fair exo selectivity and up to 60% ee. This was improved by the application of succinimide as an auxiliary for the alkene. This approach has been the only entry to a highly exo selective reaction and up to 72% ee of the exo isomer was obtained. In the Pd(BF4)2-BI-NAP-catalyzed reaction which gave mixtures of the endo and exo isomers, high ee of up to 93% was in a single case obtained for the minor exo isomer. In one case it was also observed that a Zn(OTf)2-BOX complex induced some exo selectivity and up to 82% ee of the exo isomer. 

Nitrones are a rather polarized 1,3-dipoles so that the transition structure of their cydoaddition reactions to alkenes activated by an electron-withdrawing substituent would involve some asynchronous nature with respect to the newly forming bonds, especially so in the Lewis acid-catalyzed reactions. Therefore, the transition structures for the catalyzed nitrone cydoaddition reactions were estimated on the basis of ab-initio calculations using the 3-21G basis set. A model reaction indudes the interaction between CH2=NH(0) and acrolein in the presence or absence of BH3 as an acid catalyst (Scheme 7.30). Both the catalyzed and uncatalyzed reactions have only one transition state in each case, indicating that the reactions are both concerted. However, the synchronous nature between the newly forming 01-C5 and C3-C4 bonds in the transition structure TS-J of the catalyzed reaction is rather different from that in the uncatalyzed reaction TS-K. For example, the bond lengths and bond orders in the uncatalyzed reaction are 1.93 A and 0.37 for the 01-C5 bond and 2.47 A and 0.19 for the C3-C4 bond, while those in... 

The Heck reaction is considered to be the best method for carbon-carbon bond formation by substitution of an olefinic proton. In general, yields are good to very good. Sterically demanding substituents, however, may reduce the reactivity of the alkene. Polar solvents, such as methanol, acetonitrile, N,N-dimethylformamide or hexamethylphosphoric triamide, are often used. Reaction temperatures range from 50 to 160 °C. There are various other important palladium-catalyzed reactions known where organopalladium complexes are employed however, these reactions must not be confused with the Heck reaction. 

When water-miscible ionic liquids are used as solvents, and when the products are partly or totally soluble in these ionic liquids, the addition of polar solvents, such as water, in a separation step after the reaction can make the ionic liquid more hydrophilic and facilitate the separation of the products from the ionic liquid/water mixture (Table 5.3-2, case e). This concept has been developed by Union Carbide for the hydroformylation of higher alkenes catalyzed by Rh-sulfonated phosphine ligand in the N-methylpyrrolidone (NMP)/water system. Thanks to the presence of NMP, the reaction is performed in one homogeneous phase. After the reaction. 

I Elimination reactions are, in a sense, the opposite of addition reactions. They occur when a single reactant splits into two products, often with formation of a small molecule such as wateT or HBr. An example is the acid-catalyzed reaction of an alcohol to yield water and an alkene. 

As described in Section 2.3.2, vinylaziridines are versatile intermediates for the stereoselective synthesis of (E)-alkene dipeptide isosteres. One of the simplest methods for the synthesis of alkene isosteres such as 242 and 243 via aziridine derivatives of type 240 and 241 (Scheme 2.59) involves the use of chiral anti- and syn-amino alcohols 238 and 239, synthesizable in turn from various chiral amino aldehydes 237. However, when a chiral N-protected amino aldehyde derived from a natural ot-amino acid is treated with an organometallic reagent such as vinylmag-nesium bromide, a mixture of anti- and syn-amino alcohols 238 and 239 is always obtained. Highly stereoselective syntheses of either anti- or syn-amino alcohols 238 or 239, and hence 2,3-trans- or 2,3-as-3-alkyl-2-vinylaziridines 240 or 241, from readily available amino aldehydes 237 had thus hitherto been difficult. Ibuka and coworkers overcame this difficulty by developing an extremely useful epimerization of vinylaziridines. Palladium(0)-catalyzed reactions of 2,3-trons-2-vinylaziri-dines 240 afforded the thermodynamically more stable 2,3-cis isomers 241 predominantly over 240 (241 240 >94 6) through 7i-allylpalladium intermediates, in accordance with ab initio calculations [29]. This epimerization allowed a highly stereoselective synthesis of (E) -alkene dipeptide isosteres 243 with the desired L,L-... 

Instead ef the name metathesis, the term disproportionation is frequently applied to the reaction, and sometimes the term dismutation. For historical reasons the name disproportionation is most commonly used for the heterogeneously catalyzed reaction, while the homogeneously catalyzed reaction is usually designated as metathesis. The name disproportionation is correct in the case of the conversion of acyclic alkenes according to Eq. (1) however, this name is inadequate in most other situations, such as the reaction between two different alkenes, and reactions involving cycloalkenes. Similar objections apply to the name dismutation. The name metathesis is not subject to these limitations and, therefore, is preferred. 

With regard to the mechanism of these Pd°-catalyzed reactions, little is known in addition to what is shown in Scheme 10-62. In our opinion, the much higher yields with diazonium tetrafluoroborates compared with the chlorides and bromides, and the low yields and diazo tar formation in the one-pot method using arylamines and tert-butyl nitrites (Kikukawa et al., 1981 a) indicate a heterolytic mechanism for reactions under optimal conditions. The arylpalladium compound is probably a tetra-fluoroborate salt of the cation Ar-Pd+, which dissociates into Ar+ +Pd° before or after addition to the alkene. An aryldiazenido complex of Pd(PPh3)3 (10.25) was obtained together with its dediazoniation product, the corresponding arylpalladium complex 10.26, in the reaction of Scheme 10-64 by Yamashita et al. (1980). Aryldiazenido complexes with compounds of transition metals other than Pd are discussed in the context of metal complexes with diazo compounds (Zollinger, 1995, Sec. 10.1). 

The ethylaluminium dichloride-catalyzed reaction of p-toluenesulphinyl chloride with alkenes 136 successfully applied191 for the synthesis of allylic sulphoxides 137 (equation 74) may also be regarded formally as a reaction of sulphinyl chlorides with compounds containing active hydrogen atom. Treatment of an alkene 136 with one equivalent each of ethylaluminium dichloride and p-toluenesulphinyl chloride at room temperature gave the corresponding 137. This reaction is very general and proceeds in... 

The free radical additions of sulfonyl halides to alkenes, catalyzed by light or typical chemical radical initiators (In), were first investigated in the 1950s69. The products which are / -halo sulfones (22) were obtained via a chain reaction in which RSO j acts as the chain carrier, namely61-62,70,71... 

Se-phenyl areneselenosulfonates (24) undergo facile free-radical addition to alkenes to produce / -phenylseleno sulfones (25) in excellent yield86,87 (see Scheme 7). The addition occurs regiospecifically and affords anti-Markovnikov products contrary to the analogous boron trifluoride catalyzed reaction which produces exclusively Markovnikov and highly stereospecific products86 (equation 37). Reaction 36 has been shown to have the radical... 

Nafion-H (144), a perfluorinated resin-sulfonic acid, is an efficient Bronsted-acid catalyst which has two advantages it requires only catalytic amounts since it forms reversible complexes, and it avoids the destruction and separation of the catalyst upon completion of the reaction [94], Thus in the presence of Nafion-H, 1,4-benzoquinone and isoprene give the Diels-Alder adduct in 80% yield at 25 °C, and 1,3-cyclohexadiene reacts with acrolein at 25 °C affording 88 % of cycloadduct after 40 h, while the uncatalyzed reactions give very low yields after boiling for 1 h or at 100 °C for 3.5 h respectively [95], Other examples are given in Table 4.24. In the acid-catalyzed reactions that use highly reactive dienes such as isoprene and 2,3-dimethylbutadiene, polymerization of alkenes usually occurs with Nafion-H, no polymerization was observed. 

As in the case of the base-catalyzed reaction, the thermodynamically most stable alkene is the one predominantly formed. However, the acid-catalyzed reaction is much less synthetically useful because carbocations give rise to many side products. If the substrate has several possible locations for a double bond, mixtures of all possible isomers are usually obtained. Isomerization of 1-decene, for example, gives a mixture that contains not only 1-decene and cis- and franj-2-decene but also the cis and trans isomers of 3-, 4-, and 5-decene as well as branched alkenes resulting from rearrangement of carbocations. It is true that the most stable alkenes predominate, but many of them have stabilities that are close together. Acid-catalyzed migration of triple bonds (with allene intermediates) can be accomplished if very strong acids (e.g., HF—PF5) are used. If the mechanism is the same as that for double bonds, vinyl cations are intermediates. 

Carboxylic esters are produced by the addition of carboxylic acids to alkenes, a reaction that is usually acid catalyzed (by proton or Lewis acids ) and similar in mechanism to 15-5. Since Markovnikov s rule is followed, hard-to-get esters of... 

Palladium-catalyzed reaction of alkyne 47 with a variety of aryl and vinyl halides afforded alkenes 48 in good yield. Cyclization to quinolines 49 was performed by treating 4 8 with TsOH in EtOH <96T(52)10225>. 

Table 4 Results of the alkene epoxidation reactions with m complexes immobilized on MCM-41 by cationic exchange -CPBA catalyzed by (salen)Mn ...

---