Alcohols preparation methods

The preparation of nitroaUtane is very difficult, and it is more difficult to prepare nitro alcohols. In most of the early nitroalcohol preparation methods, oxidation nitration method was used to obtain the target products, DNPOH [37, 38] was also produced with oxidation nitration method and chlorination nitration method [39]. Disadvantages of these nitro alcohol preparation methods is The oxidized nitration... 

A method that allows for alcohol preparation with formation of new carbon-carbon bonds Primary sec ondary and tertiary alcohols can all be prepared... 

Aqueous Solution Viscosity. A special solution preparation method is used for one type of measurement of aqueous solution viscosity (96). The appropriate amount of poly(ethylene oxide) resin is dispersed in 125 mL of anhydrous isopropyl alcohol by vigorous stirring. Because the resin is insoluble in anhydrous isopropyl alcohol, a slurry forms and the alcohol wets the resin particles. An appropriate amount of water is added and stirring is slowed to about 100 rpm to avoid shear degradation of the polymer. In Table 4, the nominal resin concentration reported is based on the amount of water present and ignores the isopropyl alcohol. 

Desulfurization of fl, a-epoxy sulfones 239 prepared from allylic sulfones 238 and m-chloroperbenzoic acid with sodium amalgam leads to the formation of allyl alcohols (240) in good yields (equation 144)138. Allyl alcohols prepared by this method are listed in Table 16. 

Transformation of bromocriptine free base 2 into water soluble salt -mesylate, is the only way to obtain a suitable therapeutical form. Crystallization of mesylate using alcohol as a solvent in the presence of excess of strong acid, e.g. methanesulphonic acid can induce formation of 12 -0-alkyl-derivative 2. Until now this derivatisation of ergot molecule has been practically unknown. In continuation we developed the preparative method for obtaining these compounds, (using tetrafluoroboric acid as a catalyst) (ref. 20). 

Thiols have also been prepared from alcohols. One method involves treatment with H2S and a catalyst such as A1203, but this is limited to primary alcohols. 

As can be seen in table 1, with different preparation methods and active metals, the average size of the copper particle for the catalysts A and D were 20.3 nm and 50.0 nm. While those of the catalysts B and C were 51.3 nm and 45.4 run, respectively. CuO, non-supported metal oxide, made by impregnation is sintered and cluster whose particle size was 30 pm. The water-alcohol method provided more dispersed catalysts than the impregnation method. 

Table 9 Result of one-pot preparation method of optically active sec-alcohols (65a,b, 65e-i) by a combination of reduction of ketone and enantiomeric resolution in a water susupension medium... 

Methyl pyruvate has been prepared from the silver salt of pyruvic acid and methyl iodide,3 and from the free acid by the alcohol-vapor method without a catalyst.4 Pyruvic esters have also been prepared by the dehydrogenation of lactic acid esters.5... 

Numerous preparative methods have been reported for these acids and their salts and ester derivatives.1 4 Dithiophosphoric acids are accessible from the reaction of phosphorus pentasulfide with alcohols or phenols (Equation 18). Dithiophosphinic acids can be prepared from thiophosphinic chlorides and sodium hydrosulfide (Equation 19), although the phenyl derivative is better prepared using a modified Friedel-Crafts reaction in which phosphorus pentasulfide is reacted with benzene in the presence of anhydrous aluminium trichloride (Equation 20). 

In order to achieve the firm fixation of the artificial cornea to host tissues, composites of collagen-immobilized poly(vinyl alcohol) hydrogel with hydroxyapatite were synthesized by a hydroxyapatite particles kneading method. The preparation method, characterization, and the results of corneal cell adhesion and proliferation on the composite material were studied. PVA-COL-HAp composites were successfully synthesized. A micro-porous structure of the PVA-COL-HAp could be introduced by hydrochloric acid treatment and the porosity could be controlled by the pH of the hydrochloric acid solution, the treatment time, and the crystallinity of the HAp particles. Chick embryonic keratocyto-like cells were well attached and proliferated on the PVA-COL-HAp composites. This material showed potential for keratoprosthesis application. Further study such as a long-term animal study is now required [241]. 

---