Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alcohol synthesis esterification

Use Preparation of substituted amines and amides, acid anhydrides, esterification of alcohols, synthesis of other organic compounds. [Pg.1177]

SDS Macrocychc lactone synthesis Esterification of various alcohols [115] [124]... [Pg.363]

Acidic Cation-Exchange Resins. Brmnsted acid catalytic activity is responsible for the successful use of acidic cation-exchange resins, which are also soHd acids. Cation-exchange catalysts are used in esterification, acetal synthesis, ester alcoholysis, acetal alcoholysis, alcohol dehydration, ester hydrolysis, and sucrose inversion. The soHd acid type permits simplified procedures when high boiling and viscous compounds are involved because the catalyst can be separated from the products by simple filtration. Unsaturated acids and alcohols that can polymerise in the presence of proton acids can thus be esterified directiy and without polymerisation. [Pg.564]

The synthesis of 2,4-dihydroxyacetophenone [89-84-9] (21) by acylation reactions of resorcinol has been extensively studied. The reaction is performed using acetic anhydride (104), acetyl chloride (105), or acetic acid (106). The esterification of resorcinol by acetic anhydride followed by the isomerization of the diacetate intermediate has also been described in the presence of zinc chloride (107). Alkylation of resorcinol can be carried out using ethers (108), olefins (109), or alcohols (110). The catalysts which are generally used include sulfuric acid, phosphoric and polyphosphoric acids, acidic resins, or aluminum and iron derivatives. 2-Chlororesorcinol [6201-65-1] (22) is obtained by a sulfonation—chloration—desulfonation technique (111). 1,2,4-Trihydroxybenzene [533-73-3] (23) is obtained by hydroxylation of resorcinol using hydrogen peroxide (112) or peracids (113). [Pg.491]

Esterification is frequendy carried out by direct reaction of the carboxyhc acid with an alcohol in the presence of a small amount of mineral acid, usually concentrated sulfuric or hydrochloric acid. The esters of commercial importance in both 0- and -hydroxyben2oic acid are the methyl esters. Direct esterification has the advantage of being a single-step synthesis, but being an equihbrium it is easily reversed. The reaction to the ester is driven by either of... [Pg.284]

From Boron Halides. Using boron haUdes is not economically desirable because boron haUdes are made from boric acid. However, this method does provide a convenient laboratory synthesis of boric acid esters. The esterification of boron haUdes with alcohol is analogous to the classical conversion of carboxyUc acid haUdes to carboxyUc esters. Simple mixing of the reactants at room temperature or below ia a solvent such as methylene chloride, chloroform, pentane, etc, yields hydrogen haUde and the borate ia high yield. [Pg.215]

There are two main processes for the synthesis of ethyl alcohol from ethylene. The eadiest to be developed (in 1930 by Union Carbide Corp.) was the indirect hydration process, variously called the strong sulfuric acid—ethylene process, the ethyl sulfate process, the esterification—hydrolysis process, or the sulfation—hydrolysis process. This process is stiU in use in Russia. The other synthesis process, designed to eliminate the use of sulfuric acid and which, since the early 1970s, has completely supplanted the old sulfuric acid process in the United States, is the direct hydration process. This process, the catalytic vapor-phase hydration of ethylene, is now practiced by only three U.S. companies Union Carbide Corp. (UCC), Quantum Chemical Corp., and Eastman Chemical Co. (a Division of Eastman Kodak Co.). UCC imports cmde industrial ethanol, CIE, from SADAF (the joint venture of SABIC and Pecten [Shell]) in Saudi Arabia, and refines it to industrial grade. [Pg.403]

The procedure described is essentially that of Shioiri and Yamada. Diphenyl phosphorazidate is a useful and versatile reagent in organic synthesis. It has been used for racemlzatlon-free peptide syntheses, thiol ester synthesis, a modified Curtius reaction, an esterification of a-substituted carboxylic acld, formation of diketoplperazines, alkyl azide synthesis, phosphorylation of alcohols and amines,and polymerization of amino acids and peptides. - Furthermore, diphenyl phosphorazidate acts as a nitrene source and as a 1,3-dipole.An example in the ring contraction of cyclic ketones to form cycloalkanecarboxylic acids is presented in the next procedure, this volume. [Pg.188]

Willstatter and Bode converted tropinone into (/(-ecgonine by treating sodium tropinone with carbon dioxide and sodium, when it yielded sodium tropinonecarboxylate. This on reduction with sodium in alcohol gave some dZ-i/i-ecgonine (p. 97), which on esterification with methyl alcohol and benzoylation yielded a dhcocainc. A simpler synthesis of ( -eegonine was achieved by Willstatter and Bommer, and reference is made on p, 80 to this and other processes, some of which have been protected by patents. These improvements having enabled the prepara-... [Pg.99]

Esters can also be synthesized by an acid-catalyzed nucleophilic acyl substitution reaction of a carboxylic acid with an alcohol, a process called the Fischer esterification reaction. Unfortunately, the need to use an excess of a liquid alcohol as solvent effectively limits the method to the synthesis of methyl, ethyl, propyl, and butyl esters. [Pg.795]

Although the biosynthetic cascade hypothesis predicts the co-occurrence of endiandric acids D (4) and A (1) in nature, the former compound was not isolated until after its total synthesis was completed in the laboratory (see Scheme 6). Our journey to endiandric acid D (4) commences with the desilylation of key intermediate 22 to give alcohol 31 in 95% yield. The endo side chain is then converted to a methyl ester by hydrolysis of the nitrile to the corresponding acid with basic hydrogen peroxide, followed by esterification with diazomethane to afford intermediate 32 in 92% overall yield. The exo side chain is then constructed by sequential bromination, cyanide displacement, ester hydrolysis (33), reduction, and olefination (4) in a straight-... [Pg.272]

With a secure route to pentacyclic amine 2, the completion of the total synthesis of 1 requires only a few functional group manipulations. When a solution of 2 in ethanol is exposed to Pd-C in an atmosphere of hydrogen, the isopropenyl double bond is saturated. When a small quantity of HCI is added to this mixture, the hydro-genolysis of the benzyl ether is accelerated dramatically, giving alcohol 15 in a yield of 96%. Oxidation of the primary alcohol in 15 with an excess of Jones reagent, followed by Fischer esterification, gives ( )-methyl homosecodaphniphyllate [( )-1] in an overall yield of 85 % from 2. [Pg.469]

Mikolajczyk and coworkers have summarized other methods which lead to the desired sulfmate esters These are asymmetric oxidation of sulfenamides, kinetic resolution of racemic sulfmates in transesterification with chiral alcohols, kinetic resolution of racemic sulfinates upon treatment with chiral Grignard reagents, optical resolution via cyclodextrin complexes, and esterification of sulfinyl chlorides with chiral alcohols in the presence of optically active amines. None of these methods is very satisfactory since the esters produced are of low enantiomeric purity. However, the reaction of dialkyl sulfites (33) with t-butylmagnesium chloride in the presence of quinine gave the corresponding methyl, ethyl, n-propyl, isopropyl and n-butyl 2,2-dimethylpropane-l-yl sulfinates (34) of 43 to 73% enantiomeric purity in 50 to 84% yield. This made available sulfinate esters for the synthesis of t-butyl sulfoxides (35). [Pg.63]

As noted in the preceding section, one of the most general methods of synthesis of esters is by reaction of alcohols with an acyl chloride or other activated carboxylic acid derivative. Section 3.2.5 dealt with two other important methods, namely, reactions with diazoalkanes and reactions of carboxylate salts with alkyl halides or sulfonate esters. There is also the acid-catalyzed reaction of carboxylic acids with alcohols, which is called the Fischer esterification. [Pg.252]

The reaction of a carboxylic acid with N,Af -carbonyldiimidazolellH33 (abbreviated as CDI), forming an imidazolide as the first step followed by alcoholysis or phenolysis of the imidazolide (second step), constitutes a synthesis of esters that differs from most other methods by virtue of its particularly mild reaction conditions.t41,[5] It may be conducted in two separate steps with isolation of the carboxylic acid imidazolide, but more frequently the synthesis is carried out as a one-pot reaction without isolation of the intermediate. Equimolar amounts of carboxylic acid, alcohol, and CDI are allowed to react in anhydrous tetrahydrofuran, benzene, trichloromethane, dichloromethane, dimethylformamide, or nitromethane to give the ester in high yield. The solvents should be anhydrous because of the moisture sensitivity of CDI (see Chapter 2). Even such unusual solvent as supercritical carbon dioxide at a pressure of 3000 psi and a temperature of 36-68 °C has been used for esterification with azolides.[6]... [Pg.39]

The second step, nucleophilic attack of an alcohol or phenol on the activated carboxylic acid RCOIm (carboxylic acid imidazolide), is usually slow (several hours), but it can be accelerated by heating[7] or by adding a base[8] [9] such as NaH, NaNH2, imidazole sodium (ImNa), NaOR, triethylamine, diazabicyclononene (DBN), diazabicycloimdecene (DBU), or /7-dimethylaminopyridine to the reaction mixture (see Tables 3—1 and 3—2). This causes the alcohol to become more nucleophilic. Sodium alcoholate applied in catalytic amounts accelerates the ester synthesis to such an extent that even at room temperature esterification is complete after a short time, usually within a few minutes.[7H9] This catalysis is a result of the fact that alcoholate reacts with the imidazolide very rapidly, forming the ester and imidazole sodium. [Pg.39]

Since the imidazolide method proceeds almost quantitatively, it has been used for the synthesis of isotopically labeled esters (see also Section 3.2), and it is always useful for the esterification of sensitive carboxylic acids, alcohols, and phenols under mild conditions. This advantage has been utilized in biochemistry for the study of transacylating enzymes. A number of enzymatic transacylations (e.g., those catalyzed by oc-chymo-trypsin) have been shown to proceed in two steps an acyl group is first transferred from the substrate to the enzyme to form an acyl enzyme, which is then deacylated in a second step. In this context it has been shown[21] that oc-chymotrypsin is rapidly and quantitatively acylated by Af-fraw.s-cinnamoylimidazole to give /ra/w-cinnamoyl-a-chymotrypsin, which can be isolated in preparative quantities and retains its enzymatic activity (see also Chapter 6). [Pg.42]


See other pages where Alcohol synthesis esterification is mentioned: [Pg.83]    [Pg.688]    [Pg.63]    [Pg.676]    [Pg.526]    [Pg.155]    [Pg.73]    [Pg.261]    [Pg.380]    [Pg.239]    [Pg.285]    [Pg.81]    [Pg.10]    [Pg.201]    [Pg.699]    [Pg.63]    [Pg.61]    [Pg.83]    [Pg.126]    [Pg.126]    [Pg.94]    [Pg.193]    [Pg.212]    [Pg.99]    [Pg.37]    [Pg.438]   
See also in sourсe #XX -- [ Pg.154 ]




SEARCH



Alcohols synthesis

Alcohols, esterification

Esterifications alcohols

© 2024 chempedia.info