Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Additional Test Program of Level

If the quantity of the substance placed on the market exceeds 100 toimes per year per manufacturer or if the total quantity reaches 500 tonnes per manufacturer, the additional test program of level 1 is required. The exact test program depends on the results of the base set. The competent authorities are justified to require these tests even up to 101 year , depending on the results of the base set and the usage of the substance. The following tests are required  [Pg.142]


The competent authority has to decide whether additional information as required for the test program of level one or two is necessary. [Pg.145]

Another experimental program was conducted with binder-flame retardant combinations on rando-rayon. The eighteen flame retardants were paired with a latex binder and screened for performance in an NFPA-701 flame retardant test. Seven of the best performing flame retardants were chosen for further study. Additionally, since all seven happened to be non-durable, the best performing durable flame retardant was added at a higher add-on and flame retardant level. [Pg.154]

Tables 13.5 to 13.9 show the results of applying two-way ANOVA to the 1-propanol content in wines resulting from fermentation of the same must with or without skins and in the presence or absence of sulfur dioxide, that corresponds to a 7 factorial design (Herraiz et al. 1990 Martln-Alvarez et al. 2006), obtained with the STATISTICA program (Factorial ANOVA procedure, in the ANOVA module). They include the two-way ANOVA table (only the skins factor has a significant influence at the 95% confidence level, P < 0.05), the mean and the standard error values of 1-propanol content for each combination of levels of factors (greater values in wines elaborated with the addition of skins), and the results of the S-N-K test for comparison of means of the skins factor. Figure 13.2 shows plots of the means of 1-propanol content for each level of factors. Tables 13.5 to 13.9 show the results of applying two-way ANOVA to the 1-propanol content in wines resulting from fermentation of the same must with or without skins and in the presence or absence of sulfur dioxide, that corresponds to a 7 factorial design (Herraiz et al. 1990 Martln-Alvarez et al. 2006), obtained with the STATISTICA program (Factorial ANOVA procedure, in the ANOVA module). They include the two-way ANOVA table (only the skins factor has a significant influence at the 95% confidence level, P < 0.05), the mean and the standard error values of 1-propanol content for each combination of levels of factors (greater values in wines elaborated with the addition of skins), and the results of the S-N-K test for comparison of means of the skins factor. Figure 13.2 shows plots of the means of 1-propanol content for each level of factors.
After each soil sample was blended, air dried, and screened (2 mm sieve opening) triplicate aliquots were taken and analyzed for 2,3,7,8-TCDD, CDD and CDF congeners, and 2,4-D and 2,4,5-T. The three prepared soils had 2,3,7,8-TCDD levels greater than 100 ng/g and 2,4-D/2,4,5-T levels of about 1000 yg/g. The JI soil had significant concentrations of hepta and octa CDD compared with the other two samples. In addition, selected physical and chemical properties presented in Table I, were measured (6). The EPA test program (5) had indicated that soil properties had only a minor influence on removal efficiencies for 2,3,7,8-TCDD. [Pg.323]

Authorization for plant protection products is governed in general by the EPA (Environmental Protection Agency) and more precisely by the OPP (Office of Pesticide Programs). The market approval procedure is initially at the federal level and then at the level of each state. Thus, the company requesting approval first submits a request file at the federal level, and once federal approval has been granted, the company files in each state in which it intends to commercialize the product. Certain states may request additional tests, not previously requested by the federal authority. [Pg.51]

Tests carried out on cement-polymer composites specimens. In conducted research program for modification of concrete series there were used different amount of styrene-butadiene dispersion additive (SBR). The following levels of polymer addition dosage were used 5, 10, 20 % of cement mass. Concretes were designed on the base of CEM I 32,5R cement, assuming its application on the level of 350 kg/m3. W/c ratio for all concrete mixes was equal to 0.50. As control the specimens made of concrete C 30/37 without any addition of SBR (0%) were adopted. [Pg.231]

It is believed that the test program outlined in this paper established the feasibility of using pumps for large scale cryogenic transfer systems. In addition, it is of interest that water testing established performance levels which w re met during actual operation on liquid oxygen. [Pg.341]

Description This means-tested cash transfer program is meant to ensure a minimum level of subsistence for low-income individuals. To be eligible, mily members must be permanent residents of the country and the family s per capita income over the last three months must have been less than LTL135 (US 52) per month. In addition, the value of the household s property must be less than a certain threshold set by the government and based on household size and place of residence. The program is autonomously administered by social assistance departments in municipalities. [Pg.467]

BAC levels are also necessary for death investigations, since fatal accidents may involve alcohol as a contributing factor. Deaths dne to acnte or chronic effects of alcohol alone or in combination with other drngs may also reqnire determination of BAC levels. In addition, blood or nrine determination may also be part of the protocol for many workplace drug-testing programs. [Pg.921]


See other pages where Additional Test Program of Level is mentioned: [Pg.139]    [Pg.142]    [Pg.142]    [Pg.139]    [Pg.142]    [Pg.142]    [Pg.164]    [Pg.49]    [Pg.665]    [Pg.8]    [Pg.180]    [Pg.129]    [Pg.413]    [Pg.88]    [Pg.331]    [Pg.263]    [Pg.2774]    [Pg.85]    [Pg.26]    [Pg.288]    [Pg.343]    [Pg.935]    [Pg.775]    [Pg.18]    [Pg.191]    [Pg.899]    [Pg.17]    [Pg.197]    [Pg.59]    [Pg.357]    [Pg.147]    [Pg.271]    [Pg.57]    [Pg.713]    [Pg.34]    [Pg.138]    [Pg.257]    [Pg.26]    [Pg.86]    [Pg.163]    [Pg.270]   


SEARCH



Additive levels

Additives leveling

Programmed addition

Test Program

© 2024 chempedia.info