Styrene-ethylene-propylene

Most addition polymers are formed from polymerizations exhibiting chain-growth kinetics. This includes the typical polymerizations, via free radical or some ionic mode, of the vast majority of vinyl monomers such as vinyl chloride, ethylene, styrene, propylene, methyl methacrylate, and vinyl acetate. By comparison, most condensation polymers are formed from systems exhibiting stepwise kinetics. Industrially this includes the formation of polyesters and polyamides (nylons). Thus, there exists a large overlap between the terms stepwise kinetics and condensation polymers, and chainwise kinetics and addition (or vinyl) polymers. A comparison of the two types of systems is given in Table 4.1. 

The title olefins form complexes with Ni(0) with equilibrium constants for formation decreasing in the order ethylene > styrene > propylene 1-hexene > disubstituted alkenes (28). With ethylene and styrene the (olefin)NiL2 complexes have been isolated with L = P(0-o-tolyl)3. Addition of HCN to solutions of the pure olefin complexes results in rapid and complete conversion to alkylnickel cyanide intermediates which are spectroscopically detectable subsequent C—C coupling gives the observed nitrile products propionitrile from ethylene and (predominantly) 2-phenylpropion-itrile from styrene (47). The same alkyl intermediates are formed when ethylene and styrene are added to HNiL3CN [L = p(0-o-tolyl)3]. 

Combination techniques such as microscopy—ftir and pyrolysis—ir have helped solve some particularly difficult separations and complex identifications. Microscopy—ftir has been used to determine the composition of copolymer fibers (22) polyacrylonitrile, methyl acrylate, and a dye-receptive organic sulfonate trimer have been identified in acryHc fiber. Both normal and grazing angle modes can be used to identify components (23). Pyrolysis—ir has been used to study polymer decomposition (24) and to determine the degree of cross-linking of sulfonated divinylbenzene—styrene copolymer (25) and ethylene or propylene levels and ratios in ethylene—propylene copolymers (26). 

The molecules join together to form a long chain-like molecule which may contain many thousands of ethylene units. Such a molecule is referred to as a polymer, in this case polyethylene, whilst in this context ethylene is referred to as a monomer. Styrene, propylene, vinyl chloride, vinyl acetate and methyl methacrylate are other examples of monomers which can polymerise in this way. Sometimes two monomers may be reacted together so that residues of both are to be found in the same chain. Such materials are known as copolymers and are exemplified by ethylene-vinyl acetate copolymers and styrene-acrylonitrile copolymers. 

In degree 2 only reactivity degrees are treated vis- i-vis exothermic polymerization in particular and addition reactions on the double bond (ethylene, butadiene, styrene, propylene), easy peroxidation (isopropyl oxide, acetaldehyde), hydrolysis (acetic anhydride). Possibly only propionitrile and substances with code 0 have an actual NFPA stability code. Every time one has to deal with the NFPA code one has to interpret it after carefully reading the paragraphs in Part Two. 

Hardin BD, Niemeier RW, Sikov MR, et al Reproductive-toxicologic assessment of the epoxides ethylene oxide, propylene oxide, butylene oxide, and styrene oxide. Stand J Work Environ Health 9 94—102, 1983... 

How might you prepare a block copolymer of styrene and an alternation copolymer of ethylene and propylene ... 

The range of monomers that can be incorporated into block copolymers by the living anionic route includes not only the carbon-carbon double-bond monomers susceptible to anionic polymerization but also certain cyclic monomers, such as ethylene oxide, propylene sulfide, lactams, lactones, and cyclic siloxanes (Chap. 7). Thus one can synthesize block copolymers involving each of the two types of monomers. Some of these combinations require an appropriate adjustment of the propagating center prior to the addition of the cyclic monomer. For example, carbanions from monomers such as styrene or methyl methacrylate are not sufficiently nucleophilic to polymerize lactones. The block copolymer with a lactone can be synthesized if one adds a small amount of ethylene oxide to the living polystyryl system to convert propagating centers to alkoxide ions prior to adding the lactone monomer. 

Other commercial copolymers which are typically random are those of vinyl chloride and vinyl acetate (Vinylite), isobutylene and isoprene (butyl rubber), styrene and butadiene (SBR), and acrylonitrile and butadiene (NBR). The accepted nomenclature is illustrated by EP, which is designated poly-ethylene-co-propylene the co designating that the polymer is a copolymer. When the copolymers are arranged in a regular sequence in the chains, i.e., ABAB, the copolymer is called an alternating copolymer. A copolymer consisting of styrene and maleic anhydride (SMA) is a typical alternating copolymer. 

Several flexible polymers, such as natural rubber (NR) synthetic rubber (SR) polyalkyl acrylates copolymers of acrylonitrile, butadiene, and styrene, (ABS) and polyvinyl alkyl ethers, have been used to improve the impact resistance of PS and PVC. PS and copolymers of ethylene and propylene have been used to increase the ductility of polyphenylene oxide (PPO) and nylon 66, respectively. The mechanical properties of several other engineering plastics have been improved by blending them with thermoplastics. 

Alkylation. Friedel-Crafts alkylation (qv) of benzene with ethylene or propylene to produce ethylbenzene [100-41 -4], CgH10, or isopropylbenzene [98-82-8], C9H12 (cumene) is readily accomplished in the liquid or vapor phase with various catalysts such as BF3 (22), aluminum chloride, or supported polyphosphoric acid. The oldest method of alkylation employs the liquid-phase reaction of benzene with anhydrous aluminum chloride and ethylene (23). Ethylbenzene is produced commercially almost entirely for styrene manufacture. Cumene [98-82-8] is catalytically oxidized to cumene hydroperoxide, which is used to manufacture phenol and acetone. Benzene is also alkylated with C1Q—C20 linear alkenes to produce linear alkyl aromatics. Sulfonation of these compounds produces linear alkane sulfonates (LAS) which are used as biodegradable deteigents. 

The literature reports direct grafting by gamma-rays exposure of Nylon fibers or films to the following monomers carbon monoxide (/65), ethylene (157), propylene (157), acetylene (166), butadiene (157.162,163), styrene (158, 161,163,167,168), vinyl chloride (157,163), vinyl fluoride (169-172), vinyl acetate (161,163,173), vinyl propionate (161), vinyl butyrate (161), vinyl crotonate (161), vinyl 2-ethyl hexanoate (161), acrylic add (173,174), methyl acrylate (162, 163), ethyl acrylate (162,163), allyl acrylate (163), methyl methacrylate (28,161, 163,164), butyl methacrylate (161), acrylamide (158), methylol acrylamide (163), acrylonitrile (157,160-163, 167, 175-179), divinyl sulfone (161), vinyl pyridine (167,173), vinyl pyrrolidone (28) and triallyl cyanurate (158). 

Several 2-thienylaodiums have likewise been treated, with epoxides to obtain the corresponding 2-( -hydroryalkyl)thiophene (Eq. 801. Among the epoxides examined in this connexion are ethylene oxide, propylene oxide, styrene oxide, 1, 2-epoxy-3-butene, and. epichloro-hydrin ... 

Mention may be made briefly of the studies of Malinovekii and ca-workers,1 . wiw.iw involving addition of ammonia to ethylene oxide, propylene oxide, and styrene oxide under stringent conditions. At 400-450° over an alumina catalyst, for example, ethylene oxide and ammonia are reported to give a moderate yield of pyridine (lfl.6-10.4%). With Btyrene oxide an exceedingly complex mixture of products is formed, among which are various pyrrole and pyridine derivatives, benzene, toluene, ethylbenzeno, benzoldehyde, acetophenone, phenylacetaldehyde, and others. 

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... 

Diblock copolymers, especially those containing a block chemically identical to one of the blend components, are more effective than triblocks or graft copolymers. Thermodynamic calculations indicate that efficient compat-ibilisation can be achieved with multiblock copolymers [47], potentially for heterogeneous mixed blends. Miscibility of particular segments of the copolymer in one of the phases of the bend is required. Compatibilisers for blends consisting of mixtures of polyolefins are of major interest for recyclates. Random poly(ethylene-co-propylene) is an effective compatibiliser for LDPE-PP, HDPE-PP or LLDPE-PP blends. The impact performance of PE-PP was improved by the addition of very low density PE or elastomeric poly(styrene-block-(ethylene-co-butylene-l)-block styrene) triblock copolymers (SEBS) [52]. 

Styrene-butadiene or styrene-(ethylene-co-propylene) block copolymers are common compatibilisers for the commingled recyclate from PCW [27]. Improvement of the mechanical properties of heterogeneous PCR (33% PE+39% PVC+28% PET) or (44% PE+1% PP+28% PET+9% PS+2% PVC+16% other plastics) was performed with EPDM or hydrogenated SBS triblocks [52]. 

---