Acrylonitrile-butadiene-acrylate

ABA ABS ABS-PC ABS-PVC ACM ACS AES AMMA AN APET APP ASA BR BS CA CAB CAP CN CP CPE CPET CPP CPVC CR CTA DAM DAP DMT ECTFE EEA EMA EMAA EMAC EMPP EnBA EP EPM ESI EVA(C) EVOH FEP HDI HDPE HIPS HMDI IPI LDPE LLDPE MBS Acrylonitrile-butadiene-acrylate Acrylonitrile-butadiene-styrene copolymer Acrylonitrile-butadiene-styrene-polycarbonate alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy Acrylic acid ester rubber Acrylonitrile-chlorinated pe-styrene Acrylonitrile-ethylene-propylene-styrene Acrylonitrile-methyl methacrylate Acrylonitrile Amorphous polyethylene terephthalate Atactic polypropylene Acrylic-styrene-acrylonitrile Butadiene rubber Butadiene styrene rubber Cellulose acetate Cellulose acetate-butyrate Cellulose acetate-propionate Cellulose nitrate Cellulose propionate Chlorinated polyethylene Crystalline polyethylene terephthalate Cast polypropylene Chlorinated polyvinyl chloride Chloroprene rubber Cellulose triacetate Diallyl maleate Diallyl phthalate Terephthalic acid, dimethyl ester Ethylene-chlorotrifluoroethylene copolymer Ethylene-ethyl acrylate Ethylene-methyl acrylate Ethylene methacrylic acid Ethylene-methyl acrylate copolymer Elastomer modified polypropylene Ethylene normal butyl acrylate Epoxy resin, also ethylene-propylene Ethylene-propylene rubber Ethylene-styrene copolymers Polyethylene-vinyl acetate Polyethylene-vinyl alcohol copolymers Fluorinated ethylene-propylene copolymers Hexamethylene diisocyanate High-density polyethylene High-impact polystyrene Diisocyanato dicyclohexylmethane Isophorone diisocyanate Low-density polyethylene Linear low-density polyethylene Methacrylate-butadiene-styrene... [Pg.958]

Styrene-butadiene-acrylic terpolmer Acrylonitrile-butadiene-acrylic terpolymer... [Pg.268]

Nanocomposites with silica nanoparticles have been prepared in poly-dimethylsiloxanes, butadiene, styrene-butadiene, acrylonitrile-butadiene, acrylic and ethylene-propylene diene rubber. Nanocomposites in isoprene rubbers are here examined. In a nutshell, these nanocomposites were prepared adopting the three methods summarized above and nano-silica was reported to promote the mechanical reinforcement of poly (isoprene) matrices, less that CB but more than conventional silica, with lower viscosity. [Pg.87]

Copolymer of acrylonitrile, acrylate (ester), and styrene Acrylonitrile-butadiene-acrylate copolymer Copolymer of acrylonitrile-butadiene-methyl acrylate Copolymer of acrylonitrile-butadiene-methacrylic acid Elastomeric copolymer from an acrylate (ester) and butadiene, a mbber... [Pg.2155]

Common name - acrylonitrile-butadiene-acrylate copolymer ... [Pg.3]

Polychloroprene is usually crosslinked with metallic oxides such as zinc oxide. Carboxylated elastomers, i.e., elastomers containing a termonomer, such as acrylic acid (e.g., acrylonitrile-butadiene-acrylic acid terpolymer), are also vulcanizable using metallic oxides. Crosslinking is also possible by radiation or enzymes, but this seems largely associated with the nature of the polymers to be crosslinked. We describe the mechanisms of crosslinking in greater detail in Section 4.11. [Pg.62]

Acrylic poly (vinyl chloride) alloy Acrylonitrile-butadiene-styrene-poly(vinyl chloride) alloy... [Pg.1028]

Acrylonitrile—Butadiene—Styrene. ABS is an important commercial polymer, with numerous apphcations. In the late 1950s, ABS was produced by emulsion grafting of styrene-acrylonitrile copolymers onto polybutadiene latex particles. This method continues to be the basis for a considerable volume of ABS manufacture. More recently, ABS has also been produced by continuous mass and mass-suspension processes (237). The various products may be mechanically blended for optimizing properties and cost. Brittle SAN, toughened by SAN-grafted ethylene—propylene and acrylate mbbets, is used in outdoor apphcations. Flame retardancy of ABS is improved by chlorinated PE and other flame-retarding additives (237). [Pg.419]

Copolymers with acrylonitrile, butadiene, isoprene, acrylates, piperjiene, styrene, and polyethylene have been studied. The high cost of sorbic acid as a monomer has prevented large-scale uses. The abiUty of sorbic acid to polymerize, particularly on metallic surfaces, has been used to explain its corrosion inhibition for steel, iron, and nickel (14). [Pg.282]

At one time butadiene-acrylonitrile copolymers (nitrile rubbers) were the most important impact modifiers. Today they have been largely replaced by acrylonitrile-butadiene-styrene (ABS) graft terpolymers, methacrylate-buta-diene-styrene (MBS) terpolymers, chlorinated polyethylene, EVA-PVC graft polymers and some poly acrylates. [Pg.341]

The homopolymers, which are formed from alkyl cyanoacrylate monomers, are inherently brittle. For applications which require a toughened adhesive, rubbers or elastomers can be added to improve toughness, without a substantial loss of adhesion. The rubbers and elastomers which have been used for toughening, include ethylene/acrylate copolymers, acrylonitrile/butadiene/styrene (ABS) copolymers, and methacrylate/butadiene/styrene (MBS) copolymers. In general, the toughening agents are incorporated into the adhesive at 5-20 wt.% of the monomer. [Pg.857]

Synthetic fibers such as polyester and acrylic engineering polymers such as acrylonitrile butadiene styrene (ABS) ... [Pg.54]

Acrylic Sheet (e.g. Perspex) Acrylonitrile Butadiene Styrene Resins (1) Nylon 66 Fibre (m) Nylon 66 Plastics (m) PCTFE PTFE (n) PVDF (y) Rigid Unplasticised PVC Plasticised PVC ... [Pg.924]

There are various requirements for impact-modified PVC. The most demanding is for outdoor sidings and window frames, where lifetimes of 20 years are expected. Because butadiene polymers or copolymers (e.g., acrylonitrile/butadiene/styrene (ABS), methyl methacrylate/butadiene/styrene (MBS)) are susceptible to UV degradation these polymers are usually not employed instead acrylate polymers are used for these applications. [Pg.114]

The primary use of acrylonitrile is as the raw material for the manufacture of acrylic and modacrylic fibers. Other Major uses include the production of plastics (acrylonitrile-butadiene- styrene (ABS) and styrene-acrylonitrile (SAN), nitrile rubbers, nitrile barrier resins, adiponitrile and acrylamide (EPA 1984). [Pg.80]

IARC. 1979. Acrylonitrile, acrylic and modacrylic fibres, and acrylonitrile-butadiene-styrene and styrene-acrylonitrile copolymers. IARC monographs on the evaluation of the carcinogenic risk of... [Pg.110]

List C contains peroxidisable monomers, where the presence of peroxide may initiate exothermic polymerisation of the bulk of material. Precautions and procedures for storage and use of monomers with or without the presence of inhibitors are discussed in detail. Examples cited are acrylic acid, acrylonitrile, butadiene, 2-chlorobutadiene, chlorotrifluoroethylene, methyl methacrylate, styrene, tetraflu-oroethylene, vinyl acetate, vinylacetylene, vinyl chloride, vinylidene chloride and vinylpyridine [1]. [Pg.328]