Acid catalyzed, addition alkenes

Acid catalyzed addition of alcohols to alkenes is sometimes used Indeed before Its use as a gasoline additive was curtailed billions of pounds of tert butyl methyl ether (MTBE) was prepared by the reaction... 

The formation of alcohols by acid-catalyzed addition of water to alkenes is a fundamental organic reaction. At the most rudimentary mechanistic level, it can be viewed as involving a carbocation intermediate. The alkene is protonated, and the carbocation is then captured by water. 

A Alkenes can be converted into alcohols by acid-catalyzed addition of water. Assuming that Vlarkovnikov s rule is valid, predict the major alcohol product from each of the following alkenes. 

Triple bonds can be monohydroborated to give vinylic boranes, which can be reduced with carboxylic acids to cis alkenes or oxidized and hydrolyzed to aldehydes or ketones. Terminal alkynes give aldehydes by this method, in contrast to the mercuric or acid-catalyzed addition of water discussed at 15-4. However, terminal alkynes give vinylic boranes (and hence aldehydes) only when treated with a hindered borane such as 47, 48, or catecholborane (p. 798)," or with BHBr2—SMe2. The reaction between terminal alkynes and BH3 produces 1,1-... 

An important cyclization procedure involves acid-catalyzed addition of diene-ketones such as 58, where one conjugated alkene adds to the other conjugated alkene to form cyclopentenones (59). This is called the Nazarov cyclization Cyclization can also give the nonconjugated five-membered ring. ... 

The acid-catalyzed addition of water to the double bond of an alkene is a method for the preparation of low molecular weight alcohols that has its greatest utility in large-scale industrial processes. 

A formal asymmetric nucleophilic addition to carbonyl compounds is achieved by Trost and his co-workers in the allylic alkylation of acylals of alkenals. An excellent enantioselectivity is observed in this alkylation. The starting acylals are easily prepared by the Lewis-acid catalyzed addition of acid anhydrides to aldehydes, by use of Trost s ligand 118 (Scheme 13), where various carbon-centered nucleophiles are available (Scheme l4),101,101a-10lc Asymmetric synthesis of some natural products is achieved according to this procedure. 

Table 15. Lewis Acid Catalyzed Addition of Anhydrous Hydrogen Fluoride to Alkenes...

The scope and limitations of the Lewis acid-catalyzed additions of alkyl chlorides to carbon-carbon double bonds were studied.51 Since Lewis acid systems are well-known initiators in carbocationic polymerizations of alkenes, the question arises as to what factors govern the two transformations. The prediction was that alkylation products are expected if the starting halides dissociate more rapidly than the addition products.55 In other words, addition is expected if the initial carbocation is better stabilized than the one formed from the dissociation of the addition product. This has been verified for the alkylation of a range of alkyl-and aryl-substituted alkenes and dienes with alkyl and aralkyl halides. Steric effects, however, must also be taken into account in certain cases, such as in the reactions of trityl chloride.51... 

In a manner analogous to the acid-catalyzed addition of hydrogen peroxide, dialkyl peroxides are formed by the addition of alkyl hydroperoxides to alkenes (equation 23S).366... 

The peroxymercuration-demercuration of alkenes provides a more versatile approach to the corresponding hydroperoxides or dialkyl peroxides than direct acid-catalyzed addition (equation 239).372 374... 

Addition of Water Alkenes don t react with pure water, but in the presence of a strong acid catalyst such as sulfuric acid, a hydration reaction takes place to yield an alcohol. An -H from water adds to one carbon, and an -OH adds to the other. For example, nearly 300 million gallons of ethyl alcohol (ethanol) are produced each year in the United States by the acid-catalyzed addition of water to ethylene ... 

SE.3.1.2. Desymmetrization of gem-Dwarboxylates An equivalent of asymmetric carbonyl addition can be achieved by the alkylation of gem-dicarboxylates (Scheme 8E.17). The alkylation of gem-dicarboxylates, which are easily prepared by the Lewis acid-catalyzed addition of acid anhydrides to an aldehyde, converts the problem of differentiating the two enantiotopic 7t-faces of a carbonyl group into that of asymmetric substitution of either enantiotopic C-O bond of the gem-dicarboxylate. Although asymmetric induction may be derived from enantio-discrimination in the ionization step or in the alkene coordination step, the fast and reversible nature of alkene coordination suggests that the ionization step is more likely to be the source of enantio-discrimination. 

Although this reaction involves two steps, they can be run sequentially in the same flask. This procedure is usually the preferred method for the hydration of an alkene because the yields are higher than the acid-catalyzed addition described in Section 11.3, and rearrangements do not occur. 

Q In the presence of acid the double bond of the enol gets proton-ated. This step of the mechanism is identical to the first step of the mechanism for addition of the hydrogen halides and the acid-catalyzed addition of water to alkenes. The addition occurs so that the positive charge is located on the carbon that is bonded to the hydroxy group because this carbocation is stabilized by resonance. 

The mechanism of the formation of the tetrahydropyranyl ether (see Figure 23.1) is an acid-catalyzed addition of the alcohol to the double bond of the dihydropyran and is quite similar to the acid-catalyzed hydration of an alkene described in Section 11.3. Dihydropyran is especially reactive toward such an addition because the oxygen helps stabilize the carbocation that is initially produced in the reaction. The tetrahydropyranyl ether is inert toward bases and nucleophiles and serves to protect the alcohol from reagents with these properties. Although normal ethers are difficult to cleave, a tetrahydropyranyl ether is actually an acetal, and as such, it is readily cleaved under acidic conditions. (The mechanism for this cleavage is the reverse of that for acetal formation, shown in Figure 18.5 on page 776.)... 

Mercuric Ion-Catalyzed Hydration Alkynes undergo acid-catalyzed addition of water across the triple bond in the presence of mercuric ion as a catalyst. A mixture of mercuric sulfate in aqueous sulfuric acid is commonly used as the reagent. The hydration of alkynes is similar to the hydration of alkenes, and it also goes with Markovnikov orientation. The products are not the alcohols we might expect, however. 

We are not aware of any systematic investigations on the diastereoselectivities of the CC-bond-forming step in intermolecular reactions of carbocations with alkenes. Generally, we observed only low stereoselectivities in such cases, as illustrated for the Lewis acid catalyzed addition of 4-chloro-2-pentene to (Z)-2-butene (Scheme 19). The si,re transition state 6 is slightly favored (75 25) over the si,si (and re,re) transition state 7, and for the corresponding addition to ( )-2-butene, the advantage of si,re over si,si (or re,re) sinks to 57 43 [95]. 

The rearrangement processes, which can easily be studied in Lewis acid-catalyzed additions of alkyl halides to alkenes (Section III.B.2), give information about possible rearrangements in a growing chain produced from the corresponding monomer. 

Alkyl ethers are generally prepared by acid-catalyzed addition of alcohols to an alkene or by Williamson ether synthesis (Scheme 1.18). 

Fluorine-containing aldehydes, ketones and acid fluorides undergo photoinitiated cycloaddition reactions with fluorinated alkenes to give oxetanes.90 91 The addition of hexafluoroacetone (11) to fluoroalkenes can also be performed in the presence of the Lewis acid, aluminum chloride fluoride.92-1 22-1 23 Unlike the photochemical cycloaddition of hexafluoroacetone with trifluoroethene, the Lewis acid catalyzed addition is regioselective.92 Fluorooxetanes (c. g., 14) have also been synthesized by the addition of formaldehyde to fluoroalkenes in hydrogen fluoride.94 Examples of the formation of fluorooxetanes by [2 + 2]-cycloaddition reactions arc-given in Table 8. 

Although the addition of H2O to an alkyne resembles the acid-catalyzed addition of H2O to an alkene in some ways, an important difference exists. In the presence of strong acid or Hg " catalyst, the elements of H2O add to the triple bond, but the initial addition product, an enol, is unstable and rearranges to a product containing a carbonyl group—that is, a C=0. A carbonyl compound having two alkyl groups bonded to the C=0 carbon is called a ketone. 

Additions of Si-H bonds to alkynes occur under similar conditions and with the same catalysts as hydrosilation of alkenes. Free radical addition to terminal alkynes gives cis products by a stereospecific terminal trans addition . Supported platinum catalysts give trans products by a terminal cis addition . Chloroplatinic acid catalyzed additions to terminal alkynes give mixtures of trans-1-alkenylsilanes and trans-2-alkenylsilanes in a ratio ranging from 1 1 to 1 5 depending on the substituents on silicon . Addition of SiH2Cl2 to CH2=CHC(CH3)3 gives trans-1-alkenyl- and bis(trans-l-alkenyl)silane products, but no (2-alkenyl)silane °. Internal alkynes react more slowly than terminal alkynes, and even reactions catalyzed by chloroplatinic acid require heat. 

You may remember that the acid-catalyzed addition of H20 to alkenes is usually a difficult reaction to carry out because of the side reactions that can occur under the strongly acidic conditions required for the reaction. However, in the presence of Hg(II) salts such as HgCl2, nucleophiles such as H20 add readily to... 

The acid catalyzed addition of water or alcohols (ROH) to alkenes involves formation of a carbocation intermediate. 

In contrast to the protonation of the disubstituted alkenes mentioned above, high ktranJkcis ratios of 9 x 108 and 3 x 103, respectively have been observed in the acid-catalyzed addition of methanol to the trans- and cis-isomers of cycloheptene (39a and 38a) and cyclooctene (37a and 36a) (114a). The rate constants reflect partially the release of strain in the transformation of the cyclic olefins to the appropriate cycloalkyl cations. Comparison of the relative activation energies for these addition reactions with the difference of strain release leads to the estimate that the response to strain effects is about 60%. In a more recent study of the acid-catalyzed hydration of cis- (36b) and trans- 1-methylcyclooctene (37c), it was concluded that two conformationally different 1-methyl-carbocationic intermediates are... 

Aside from the type III cyclizations described above, acetals have seen limited use in intermolecular Prins reactionsand extensive use as initiators for cation-alkene cyclizations.Only limited success has been achieved in Lewis acid catalyzed addition of acetals to alkenes. Better success has been achieved in the synthesis of C-glycosides by Lewis acid catalyzed addition of glycosyl acetates or glycals to alkenes. Johnson has extensively developed the use of acetals as initiators for cation-alkene cyclizations. Recent studies have shown that excellent asymmetric induction can be obtained using chiral acetals derived from optically active 2,3-butanediol or 2,4-pentanediol. - ... 

---