Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Accreditation defined

CTB 941.2-93 defines laboratories subject to accreditation in National system. Among others laboratories with legal status, results of testing and measurements of which are used in assessment of safety of products, works and services, in diagnostics of technical state of critical safety objects and vehicles are noted. These laboratories use different NDT methods in their activities. [Pg.957]

The accredited laboratory must dispose of data about the state of the block surfaces, their geometrical sizes and acoustical characteristics. These characteristics are defined in periodical testing of the blocks. [Pg.958]

A detailed and comprehensive system of record keeping is necessary, including, for example, worksheets, notebooks, computer output and reports, and all of these should be retained for a reasonable period of time or as required by the customer. A period of six years is often chosen. The content of reports and certificates is tightly defined, to ensure that customers receive all relevant information and that the laboratory does not make exaggerated claims about which parts of its work have been accredited. A documented system for dealing with any customer complaints and for informing customers if discrepancies in results are subsequently discovered must be available and in place. [Pg.227]

Finally, the laboratory s freedom to subcontract tests or make use of outside services is strictly defined, to ensure that work placed with an accredited laboratory is not farmed-out to a laboratory with inadequate quality procedures. [Pg.227]

Accreditation schemes have lately found much favour and it is expected that use of such schemes will increase. Unfortunately, at the moment, these schemes are reduced to mere indications that defined procedures have been followed, and they do not guarantee that rehable results are always achieved. It is to be hoped that such schemes will be enhanced to give full confidence to the laboratory customer. [Pg.234]

A development of the last years is expected to serve more efficiently the need for clarification. Following the joint ISO-ILAC-IAF Communique of June 2005, a statement could be included on accreditation certificates. According to this statement, the accredited laboratory has demonstrated both its technical competence for the defined scope and the operation of a quality management system. [Pg.91]

This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 170252005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system , (refer joint ISO-ILAC-IAF Communique dated 18 June 2005)... [Pg.91]

Don t make it hard to find information. Make sure the sections of your resume are clearly defined. The main sections of a resume are the Heading, Job Objectives, Education, Accreditation and Licenses, Skills, Work and Employment Experience, Professional Affiliations, Military Service, References, and Personal Information. Choose what information about yourself should be included under each of the headings. The actual wording for each resume section can be modified. Also, only include the sections that apply to you. [Pg.179]

The terms selectivity and specificity are often used interchangeably. A detailed discussion of these terms as defined by different organizations has been made by Vessmann [24], He particularly pointed out the difference between specificity as defined by the International Union of Pure and Applied Chemistry, the Western European Laboratory Accreditation Conference (IUPAC/WELAC), and ICH. [Pg.551]

The aim of organic standards is to ensure that animals produced and sold as organic are raised and marketed according to defined principles. Standards and state regulations in conjunction with accreditation and certification are therefore very important as guarantees for the consumer. [Pg.8]

For laboratory accreditation, based on ISO guide 25 [27] and the EN 45001 standard, as well as for certification, based on the ISO 9000 series of standards [1], it is required that measurement and test results be traceable to international, defined, and accepted physical and physicochemical standards [28], This requirement includes the use of conventionally expressed quantities and units in conformity with the SI [29], It also includes the proper use of the concept of measurement uncertainty. All these are necessary conditions for reliance on the measurement results of another laboratory. Accreditation is granted when a laboratory has demonstrated that it is competent and capable of working in the above-mentioned sense. Technical trade barriers then fall away, and the needs and requests from industrialists, traders, and the general public can be met in the interest of open and fair trade, health, safety, and the environment. [Pg.8]

Most situations where proficiency evaluation is applied are rather narrowly defined as to scope. For example, clinical laboratories may be asked to demonstrate that they can determine certain constituents occurring in human serum with uncertainties not to exceed specific limits. Accrediting bodies will require successful participation in periodic proficiency tests conducted by a reference laboratory which they recognize. [Pg.110]

Accreditation assures clients about the competence of the laboratory in testing at the field defined in the scope... [Pg.154]

Establishment of reference values of general use requires general availability of a well-defined calibrator. The availability of such a calibrator also facilitates accreditation of procedures for quantitative determination of the corresponding analyte. Recombinant human cystatin C can easily be produced and isolated and used for establishing reliable calibrators (A2, Dl). A first step toward an international calibrator for cystatin C has been taken by the production of a solution of recombinant human cystatin C of high purity, determining the concentration of this... [Pg.79]

The Joint Commission on Accreditation of Healthcare Organizations also defines a third level of crisis—a catastrophe. A catastrophe is considered a disaster in which the community and hospital are overwhelmed and isolated for 3 or more days. This is exemplified by the Sumatra tsunami in 2004 and by Hurricane Katrina in New Orleans in 2005 (Berger, 2006). For our purposes, this category will be considered a disaster. [Pg.54]


See other pages where Accreditation defined is mentioned: [Pg.392]    [Pg.517]    [Pg.41]    [Pg.174]    [Pg.465]    [Pg.126]    [Pg.84]    [Pg.88]    [Pg.75]    [Pg.7]    [Pg.8]    [Pg.8]    [Pg.782]    [Pg.42]    [Pg.14]    [Pg.59]    [Pg.192]    [Pg.51]    [Pg.132]    [Pg.728]    [Pg.17]    [Pg.42]    [Pg.371]    [Pg.373]    [Pg.374]    [Pg.376]    [Pg.378]    [Pg.378]    [Pg.16]    [Pg.523]    [Pg.46]    [Pg.138]    [Pg.97]   
See also in sourсe #XX -- [ Pg.372 ]

See also in sourсe #XX -- [ Pg.224 , Pg.230 ]




SEARCH



Accreditation bodies defined

© 2024 chempedia.info