Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Absorption partition coefficients

Here values Ki and Ki are absorption partition coefficients, which... [Pg.307]

Ihe absorption partition coefficients of any component i between groimd water, gas and nonpolar liquid in equilibrium conditions usually... [Pg.333]

In practical geochemical and ecologic studies the composition of natural organic matter (liquid or solid) is in most cases unknown. So, as a rule, partition coefficients of a component i for a complex natural solution of unknown composition have to be dealt with. They are called absorption partition coefficient with organic matter. This coefficient Kw,i is experimentally determined and is equal to the ratio of balanced weight concentrations component i in organic matter and in water, according to equations 1.20 in (see Tikhomirov, 2016, v.l) and (2.314), i.e.,... [Pg.335]

Immobile organic matter is usually attributed directly to rocks or deposits. In this case the mass transfer with the rock organic matter is treated as absorption directly by rock, by analogy with adsorption of mineral components from water. As opposed to adsorption, absorption is a slower process as time is required for a uniform distribution of adsorbates in the organic matter. That is why instead of adsorption partition coefficient for mineral components (see ionic exchange) in this case is used by analogy absorption partition coefficient ior nonpolar compounds K. . [Pg.339]

Absorption by organic matter of rock Content of organic matter C or carbon in rock, of component i in water C,. Absorption partition coefficients with organic matter - carbon - Iw - ... [Pg.568]

Other important determinants of the effects of compounds, especially solvents, are their partition coefficients, e.g., blood-tissue partition coefficients, which determine the distribution of the compound in the body. The air-blood partition coefficient is also important for the absorption of a compound because it determines how quickly the compound can be absorbed from the airspace of the lungs into the circulation. An example of a compound that has a high air-blood partition coefficient is trichloroethane (low blood solubility) whereas most organic solvents (e.g., benzene analogues) have low air-blood partition coefficients (high blood solubility). [Pg.260]

Absorption of trichloroethylene in humans is very rapid upon inhalation exposure. Trichloroethylene has a blood/gas partition coefficient that is comparable to some other anesthetic gases (i.e., chloroform, diethylether, and methoxyfluorene), but it is much more lipophilic than these gases. As a consequence of these properties, the initial rate of uptake of inhaled trichloroethylene in humans is quite high, with the rate leveling off after a few hours of exposure (Fernandez et al. 1977). The absorbed dose is proportional to the inhaled trichloroethylene concentration, duration of exposure, and alveolar ventilation rate at a given inhaled air concentration (Astrand and Ovrum 1976). Several studies indicate that 37-64% of inhaled trichloroethylene is taken up from the lungs (Astrand and Ovrum 1976 Bartonicek 1962 Monster et al. 1976). [Pg.110]

From an analysis of the key properties of compounds in the World Dmg Index the now well accepted Rule-of-5 has been derived [25, 26]. It was concluded that compounds are most Hkely to have poor absorption when MW>500, calculated octanol-water partition coefficient Clog P>5, number of H-bond donors >5 and number of H-bond acceptors >10. Computation of these properties is now available as a simple but efficient ADME screen in commercial software. The Rule-of-5 should be seen as a qualitative absorption/permeabiHty predictor [43], rather than a quantitative predictor [140]. The Rule-of-5 is not predictive for bioavail-abihty as sometimes mistakenly is assumed. An important factor for bioavailabihty in addition to absorption is liver first-pass effect (metaboHsm). The property distribution in drug-related chemical databases has been studied as another approach to understand drug-likeness [141, 142]. [Pg.41]

The following physico-chemical properties of the analyte(s) are important in method development considerations vapor pressure, ultraviolet (UV) absorption spectrum, solubility in water and in solvents, dissociation constant(s), n-octanol/water partition coefficient, stability vs hydrolysis and possible thermal, photo- or chemical degradation. These valuable data enable the analytical chemist to develop the most promising analytical approach, drawing from the literature and from his or her experience with related analytical problems, as exemplified below. Gas chromatography (GC) methods, for example, require a measurable vapor pressure and a certain thermal stability as the analytes move as vaporized molecules within the mobile phase. On the other hand, compounds that have a high vapor pressure will require careful extract concentration by evaporation of volatile solvents. [Pg.53]

Benzoic acid derivatives also altered the electrical potential across the cell membrane in neurons of the marine mollusk Navanax lnermls (46). Salicylic acid (1-30 mM) caused a depolarization very rapidly (1-2 min) and decreased the ionic resistance across the membrane. As pH was decreased, more salicylic acid was required to reverse the effect of pH on the membrane potential (47). This result is contradictory to the influence of pH on the amount of salicylic acid required to affect mineral absorption in roots (32). The ability of a series of salicylic and benzoic acid derivatives to increase PD correlated with their octanol/water partition coefficients and pKa values (48). The authors proposed that the organic acid anions bound directly to membranes to produce the observed results. [Pg.171]

Absorption. No studies were located regarding the mechanism of absorption in humans or animals after inhalation, oral, or dermal exposure to diisopropyl methylphosphonate. Both facilitated transport and diffusion through the lipophilic portions of the membrane could be involved in absorption processes. No data were found regarding lipid solubility or partition coefficients. [Pg.75]

Table 2 Influence of Oil/Water Partition Coefficient (Ko/w) on Absorption from the Rat Intestine... Table 2 Influence of Oil/Water Partition Coefficient (Ko/w) on Absorption from the Rat Intestine...
Since many essential nutrients (e.g., monosaccharides, amino acids, and vitamins) are water-soluble, they have low oil/water partition coefficients, which would suggest poor absorption from the GIT. However, to ensure adequate uptake of these materials from food, the intestine has developed specialized absorption mechanisms that depend on membrane participation and require the compound to have a specific chemical structure. Since these processes are discussed in Chapter 4, we will not dwell on them here. This carrier transport mechanism is illustrated in Fig. 9C. Absorption by a specialized carrier mechanism (from the rat intestine) has been shown to exist for several agents used in cancer chemotherapy (5-fluorouracil and 5-bromouracil) [37,38], which may be considered false nutrients in that their chemical structures are very similar to essential nutrients for which the intestine has a specialized transport mechanism. It would be instructive to examine some studies concerned with riboflavin and ascorbic acid absorption in humans, as these illustrate how one may treat urine data to explore the mechanism of absorption. If a compound is... [Pg.48]

The Dressman-Amidon-Fleisher absorption potential concept [45], originally based on octanol-water partition coefficients, can be made more predictive, by using PAMPA permeabilities, instead of partition coefficients, for all the reasons discussed in Chapter 7. Such a scheme can be used to minimize false positive predictions of HIA. [Pg.249]

This book is written for the practicing pharmaceutical scientist involved in absorption-distribution-metabolism-excretion (ADME) measurements who needs to communicate with medicinal chemists persuasively, so that newly synthesized molecules will be more drug-like. ADME is all about a day in the life of a drug molecule (absorption, distribution, metabolism, and excretion). Specifically, this book attempts to describe the state of the art in measurement of ionization constants (p Ka), oil-water partition coefficients (log PI log D), solubility, and permeability (artificial phospholipid membrane barriers). Permeability is covered in considerable detail, based on a newly developed methodology known as parallel artificial membrane permeability assay (PAMPA). [Pg.299]

Membrane uptake of nonionized solute is favored over that of ionized solute by the membrane/water partition coefficient (Kp). If Kp = 1 for a nonionized solute, membrane permeability should mirror the solute ionization curve (i.e., membrane permeability should be half the maximum value when mucosal pH equals solute pKa). When the Kp is high, membrane uptake of nonionized solute shifts the ionization equilibrium in the mucosal microclimate to replace nonionized solute removed by the membrane. As a result, solute membrane permeability (absorption rate) versus pH curves are shifted toward the right for weak acids and toward the left for weak bases (Fig. 7). [Pg.174]

Figure 7 (Left panel) Relative absorption rate for a weak acid (pKa = 3) as a function of mucosal pH for increasing barrier (membrane) permeability (Pb) with fixed unstirred aqueous layer permeability (Pul). X = pHinflectionpoint in Eq. (4). (Right panel) Partition coefficient-dependent absorption rates for salicylic acid and the weak base ephedrine. (From Ref. 19.)... Figure 7 (Left panel) Relative absorption rate for a weak acid (pKa = 3) as a function of mucosal pH for increasing barrier (membrane) permeability (Pb) with fixed unstirred aqueous layer permeability (Pul). X = pHinflectionpoint in Eq. (4). (Right panel) Partition coefficient-dependent absorption rates for salicylic acid and the weak base ephedrine. (From Ref. 19.)...
In reviewing the pH-partition hypothesis, it is apparent that it is an oversimplification of a very complex process. It does not consider one of the critical physicochemical factors, solubility. Low aqueous solubility is often the cause of the low bioavailability. To address this issue, Dressman et al. [28] developed an absorption potential concept that takes into account not only the partition coefficient but also solubility and dose. Using a dimensional analysis approach, the following simple equation was proposed ... [Pg.394]


See other pages where Absorption partition coefficients is mentioned: [Pg.88]    [Pg.336]    [Pg.340]    [Pg.340]    [Pg.487]    [Pg.528]    [Pg.88]    [Pg.336]    [Pg.340]    [Pg.340]    [Pg.487]    [Pg.528]    [Pg.225]    [Pg.226]    [Pg.254]    [Pg.221]    [Pg.470]    [Pg.180]    [Pg.164]    [Pg.22]    [Pg.819]    [Pg.338]    [Pg.716]    [Pg.130]    [Pg.39]    [Pg.39]    [Pg.46]    [Pg.48]    [Pg.54]    [Pg.50]    [Pg.117]    [Pg.120]    [Pg.131]    [Pg.162]    [Pg.168]    [Pg.177]    [Pg.189]    [Pg.395]   
See also in sourсe #XX -- [ Pg.95 , Pg.98 ]




SEARCH



Absorption coefficient

Absorption coefficient coefficients

© 2024 chempedia.info