Zinc properties

For example,copper has relatively good corrosion resistance under non-oxidizing conditions. It can be alloyed with zinc to yield a stronger material (brass), but with lowered corrosion resistance. Flowever, by alloying copper with a passivating metal such as nickel, both mechanical and corrosion properties are improved. Another important alloy is steel, which is an alloy between iron (>50%) and other alloying elements such as carbon. 

In what ways do the chemical and physical properties of zinc(ll) differ from those of iron(ll) Account for these differences. Explain what happens when... 

Thiazole disulfides are reported to yield quantitatively A-4-thiazoline-2-thiones under treatment with zinc powder in acetic acid (326). The disulfide bond can be broken on heating at 100 to 260°C and (or) by alkali. This property has been used for photographic emulsions (327). The disulfide (136) (R = 4-(D-arabmo-tetrahydroxybutyD can be cleaved readily by aqueous sodium hydroxyde. carbonate, or hydrogen carbonate (149) to give 135 a by-product, 4-(D-arabino-ietrahydroxybutyl) thiazole... 

Copper, nickel, cobalt, iron, and zinc (270) for their physical properties using ultraviolet and infrared spectrometry (271). 

Chemical ingenuity in using the properties of the elements and their compounds has allowed analyses to be carried out by processes analogous to the generation of hydrides. Osmium tetroxide is very volatile and can be formed easily by oxidation of osmium compounds. Some metals form volatile acetylacetonates (acac), such as iron, zinc, cobalt, chromium, and manganese (Figure 15.4). Iodides can be oxidized easily to iodine (another volatile element in itself), and carbonates or bicarbonates can be examined as COj after reaction with acid. 

Molybdenum Oxides. Molybdenum was one of the first elements used to retard the flames of ceUulosics (2). Mote recently it has been used to impart flame resistance and smoke suppression to plastics (26). Molybdic oxide, ammonium octamolybdate, and zinc molybdate ate the most widely used molybdenum flame retardants. Properties ate given in Table 5. These materials ate recommended almost exclusively for poly(vinyl chloride), its alloys, and unsaturated polyesters (qv). 

Flotation or froth flotation is a physicochemical property-based separation process. It is widely utilised in the area of mineral processing also known as ore dressing and mineral beneftciation for mineral concentration. In addition to the mining and metallurgical industries, flotation also finds appHcations in sewage treatment, water purification, bitumen recovery from tar sands, and coal desulfurization. Nearly one biUion tons of ore are treated by this process aimuaHy in the world. Phosphate rock, precious metals, lead, zinc, copper, molybdenum, and tin-containing ores as well as coal are treated routinely by this process some flotation plants treat 200,000 tons of ore per day (see Mineral recovery and processing). Various aspects of flotation theory and practice have been treated in books and reviews (1 9). 

Alloys. GaUium has complete miscibility in the hquid state with aluminum, indium, tin, and zinc. No compounds are formed. However, these binary systems form simple eutectics having the following properties ... 

Other Borohydrides. Potassium borohydride was formerly used in color reversal development of photographic film and was preferred over sodium borohydride because of its much lower hygroscopicity. Because other borohydrides are made from sodium borohydride, they are correspondingly more expensive. Generally their reducing properties are not sufficiently different to warrant the added cost. Zinc borohydride [17611-70-0] Zn(BH 2> however, has found many appHcations in stereoselective reductions. It is less basic than NaBH, but is not commercially available owing to poor thermal stabihty. It is usually prepared on site in an ether solvent. Zinc borohydride was initially appHed to stereoselective ketone reductions, especially in prostaglandin syntheses (36), and later to aldehydes, acid haHdes, and esters (37). 

Within the scope of the original definition, a very wide variety of ionomers can be obtained by the introduction of acidic groups at molar concentrations below 10% into the important addition polymer families, followed by partial neutralization with metal cations or amines. Extensive studies have been reported, and useful reviews of the polymers have appeared (3—8). Despite the broad scope of the field and the unusual property combinations obtainable, commercial exploitation has been confined mainly to the original family based on ethylene copolymers. The reasons for this situation have been discussed (9). Within certain industries, such as flexible packaging, the word ionomer is understood to mean a copolymer of ethylene with methacrylic or acryhc acid, partly neutralized with sodium or zinc. 

In addition to time-related effects, the soUd-state physical properties are also affected by adsorbed water, which functions as a plasticizer. Water pickup is affected by the nature of the cation, with sodium ionomers absorbing about 10 times the level of the zinc equivalent (6) under the same conditions. Drying must be carried out at temperatures below 100°C and is therefore a slow process. In commercial practice, ionomers are suppUed dry, and techniques have been developed to minimize moisture absorption during processing. 

Electrical Properties. Due to the comparatively low content of polar groups, most commercial ionomers ate very good insulating resins. Typical electrical properties (6) for a zinc ionomer are as foUows ... 

Selective Reduction. In aqueous solution, europium(III) [22541 -18-0] reduction to europium(II) [16910-54-6] is carried out by treatment with amalgams or zinc, or by continuous electrolytic reduction. Photochemical reduction has also been proposed. When reduced to the divalent state, europium exhibits chemical properties similar to the alkaline-earth elements and can be selectively precipitated as a sulfate, for example. This process is highly selective and allows production of high purity europium fromlow europium content solutions (see Calcium compounds Strontiumand strontium compounds). 

Zinc dialkyl dithiophosphates are the primary oxidation inhibitors in combining these functions with antiwear properties in automotive oils and high pressure hydrauhc fluids. Their production volume is followed by aromatic amines, sulfurized olefins, and phenols (22). 

E. C. Porter, Zinc Handbook Properties, Processing, and Use in Design, International Lead Zinc Research Organization, Marcel Dekker, New York, 1991. 

Sulfide collectors ia geaeral show Htfle affinity for nonsulfide minerals, thus separation of one sulfide from another becomes the main issue. The nonsulfide collectors are in general less selective and this is accentuated by the large similarities in surface properties between the various nonsulfide minerals (42). Some examples of sulfide flotation are copper sulfides flotation from siUceous gangue sequential flotation of sulfides of copper, lead, and zinc from complex and massive sulfide ores and flotation recovery of extremely small (a few ppm) amounts of precious metals. Examples of nonsulfide flotation include separation of sylvite, KCl, from haUte, NaCl, which are two soluble minerals having similar properties selective flocculation—flotation separation of iron oxides from siUca separation of feldspar from siUca, siUcates, and oxides phosphate rock separation from siUca and carbonates and coal flotation. 

Tungsten has Htde effect on recrystallization temperature or the high temperature properties of molybdenum. However, the Mo—30% W alloy is recognized as a standard commercial alloy for stirrers, pipes, and other equipment that is required to be in contact with molten zinc during processing of the metal and in galvanizing and die casting operations. 

---