Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Xylenes, Isomeric

Xylene isomerization Xylene isomers m-Xylenes [108-38-3] o-Xylenes [95-47-6] p-Xylenes [106-42-3] Xylenes... [Pg.1078]

Xylene Isomerization. After separation of the preferred xylenes, ie, PX or OX, using the adsorption or crystallization processes discussed herein, the remaining raffinate stream, which tends to be rich in MX, is typically fed to a xylenes isomerization unit in order to further produce the preferred xylenes. Isomerization units are fixed-bed catalytic processes that are used to produce a close-to-equiUbrium mixture of the xylenes. To prevent the buildup of EB in the recycle loop, the catalysts are also designed to convert EB to either xylenes, benzene and lights, or benzene and diethylbenzene. [Pg.421]

The three major commercial Hcensors of xylenes isomerization processes are Engelhard, UOP, and Mobil. Several other companies have developed and used their own catalysts. These companies include Mitsubishi Gas—Chemical, Toray, ICI, Amoco, and Shell. AH of these processes are discussed herein. [Pg.421]

Zeolite and Molecular Sieve-Based Process. Mobil has commercialized several xylene isomerization processes that are based on ZSM-5. Amoco has developed a process based on a medium-pore borosiUcate molecular sieve. [Pg.422]

Amorphous Silica—Alumina Based Processes. Amorphous siHca—alumina catalysts had been used for many years for xylene isomerization. Examples ate the Chevron (130), Mamzen (131), and ICI (132—135). The primary advantage of these processes was their simpHcity. No hydrogen was requited and the only side reaction of significance was disproportionation. However, in the absence of H2, catalyst deactivation via coking... [Pg.422]

In shape-selective catalysis, the pore size of the zeoHte is important. For example, the ZSM-5 framework contains 10-membered rings with 0.6-nm pore size. This material is used in xylene isomerization, ethylbenzene synthesis, dewaxing of lubricatius oils and light fuel oil, ie, diesel and jet fuel, and the conversion of methanol to Hquid hydrocarbon fuels (21). [Pg.449]

J. R. Gieen, "The Mobil High Tempeiatuie Xylene Isomerization (MHTl) Process," 1988 Petrochemical Review, DeWitt Company, Houston, Tex., Mai. 23-25, 1988. [Pg.55]

Mass transport selectivity is Ulustrated by a process for disproportionation of toluene catalyzed by HZSM-5 (86). The desired product is -xylene the other isomers are less valuable. The ortho and meta isomers are bulkier than the para isomer and diffuse less readily in the zeoHte pores. This transport restriction favors their conversion to the desired product in the catalyst pores the desired para isomer is formed in excess of the equUibrium concentration. Xylene isomerization is another reaction catalyzed by HZSM-5, and the catalyst is preferred because of restricted transition state selectivity (86). An undesired side reaction, the xylene disproportionation to give toluene and trimethylbenzenes, is suppressed because it is bimolecular and the bulky transition state caimot readily form. [Pg.180]

In order to produce more paraxylene than is available in catalytic reformate, a xylenes-isomerization plant is sometimes included in the processing scheme. The isomerization step uses the effluent (filtrate) from the paraxylene crystallization step as feed. The filtrate contains about 7-9 percent of paraxylene. The isomerization unit brings the concentration back to its equilibrium value of about 20 percent. [Pg.113]

Figure 2-3. Flow diagram of the Mobil xylene isomerization process. ... Figure 2-3. Flow diagram of the Mobil xylene isomerization process. ...
Detergent manufacturing Catalytic cracking and hydrocracking Xylene isomerization, benzene alkylation, catalytic cracking, catalyst dewaxing, and methanol conversion. [Pg.87]

Many chemical reactions, especially those involving the combination of two molecules, pass through bulky transition states on their way from reactants to products. Carrying out such reactions in the confines of the small tubular pores of zeolites can markedly influence their reaction pathways. This is called transition-state selectivity. Transition-state selectivity is the critical phenomenon in the enhanced selectivity observed for ZSM-5 catalysts in xylene isomerization, a process practiced commercially on a large scale. [Pg.172]

Separation of isomers is an application where zeolite membranes could be specifically interesting because of their well-defined pores that lead to molecular sieving effects. An application that is often considered is the xylene isomerization and related reactions. [Pg.224]

Table 10.2 Performance of several zeolite membrane reactors in the xylene isomerization reaction. [Pg.225]

Since their development in 1974 ZSM-5 zeolites have had considerable commercial success. ZSM-5 has a 10-membered ring-pore aperture of 0.55 nm (hence the 5 in ZSM-5), which is an ideal dimension for carrying out selective transformations on small aromatic substrates. Being the feedstock for PET, / -xylene is the most useful of the xylene isomers. The Bronsted acid form of ZSM-5, H-ZSM-5, is used to produce p-xylene selectively through toluene alkylation with methanol, xylene isomerization and toluene disproportionation (Figure 4.4). This is an example of a product selective reaction in which the reactant (toluene) is small enough to enter the pore but some of the initial products formed (o and w-xylene) are too large to diffuse rapidly out of the pore. /7-Xylene can, however. [Pg.95]

Xylene isomerization reactions can be accomplished by contacting a hot gas stream with a solid catalyst. Under these conditions the isomerization reactions may be regarded as reversible and first-order. Unfortunately, the catalyst also catalyzes disproportionation reactions. These reactions may be regarded as essentially second-order and irreversible. If one desires to achieve an equilibrium mixture of isomers with minimal material losses due to disproportionation, what do you recommend concerning the mode in which one should operate a continuous flow reactor ... [Pg.343]

The effect of crystal size of these zeolites on the resulted toluene conversion can be ruled out as the crystal sizes are rather comparable, which is particularly valid for ZSM-5 vs. SSZ-35 and Beta vs. SSZ-33. The concentrations of aluminum in the framework of ZSM-5 and SSZ-35 are comparable, Si/Al = 37.5 and 39, respectively. However, the differences in toluene conversion after 15 min of time-on-stream (T-O-S) are considerable being 25 and 48.5 %, respectively. On the other hand, SSZ-35 exhibits a substantially higher concentration of strong Lewis acid sites, which can promote a higher rate of the disproportionation reaction. Two mechanisms of xylene isomerization were proposed on the literature [8] and especially the bimolecular one involving the formation of biphenyl methane intermediate was considered to operate in ZSM-5 zeolites. Molecular modeling provided the evidence that the bimolecular transition state of toluene disproportionation reaction fits in the channel intersections of ZSM-5. With respect to that formation of this transition state should be severely limited in one-dimensional (1-D) channel system of medium pore zeolites. This is in contrast to the results obtained as SSZ-35 with 1-D channels system exhibits a substantially higher... [Pg.275]

Chevron (1) An obsolete xylene isomerization process that used a silica-alumina catalyst. [Pg.63]

Parex (1) [Para extraction] A version of the Sorbex process, for selectively extracting p-xylene from mixtures of xylene isomers, ethylbenzene, and aliphatic hydrocarbons. The feedstock is usually a C8 stream from a catalytic reformer, mixed with a xylene stream from a xylene isomerization unit. The process is operated at 177°C the desorbent is usually p-diethylbenzene. The first commercial plant began operation in Germany in 1971 by 1992, 453 plants had been licensed worldwide. Not to be confused with Parex (2). [Pg.203]

XIS [Xylene isomerization] A process for isomerizing /j-xylcne to the equilibrium mixture of C8 aromatic hydrocarbons. Developed by Maruzen Oil in the United States. [Pg.295]

Structure-Selectivity Relationship in Xylene Isomerization and Selective Toluene Disproportionation... [Pg.272]

As a result of steric constraints imposed by the channel structure of ZSM-5, new or improved aromatics conversion processes have emerged. They show greater product selectivities and reaction paths that are shifted significantly from those obtained with constraint-free catalysts. In xylene isomerization, a high selectivity for isomerization versus disproportionation is shown to be related to zeolite structure rather than composition. The disproportionation of toluene to benzene and xylene can be directed to produce para-xylene in high selectivity by proper catalyst modification. The para-xylene selectivity can be quantitatively described in terms of three key catalyst properties, i.e., activity, crystal size, and diffusivity, supporting the diffusion model of para-selectivity. [Pg.272]

Intermediate pore zeolites typified by ZSM-5 (1) show unique shape-selectivities. This has led to the development and commercial use of several novel processes in the petroleum and petrochemical industry (2-4). This paper describes the selectivity characteristics of two different aromatics conversion processes Xylene Isomerization and Selective Toluene Disproportionation (STDP). In these two reactions, two different principles (5,j6) are responsible for their high selectivity a restricted transition state in the first, and mass transfer limitation in the second. [Pg.272]

Prior to the introduction of ZSM-5-based xylene isomerization processes, most of the commercial units operated with a... [Pg.272]

OLSON HAAG Xylene Isomerization Toluene Disproportionation 277... [Pg.274]

Early attempts to utilize the high acid activity of faujasite zeolite catalysts for direct xylene isomerization suffered from low selectivity. Considerable improvement was obtained first by using a large pore zeolite (7) catalyst and subsequently in several process modifications that use ZSM-5 as catalyst (2). In the following we will show how these selectivity differences can be related to structural differences of the various zeolites. [Pg.274]

Table I. Selectivity in Xylene Isomerization Feed 70% m-/30% o-Xylene, 316°C Pressure 28 bar... Table I. Selectivity in Xylene Isomerization Feed 70% m-/30% o-Xylene, 316°C Pressure 28 bar...
The correlation between selectivity and intracrystalline free space can be readily accounted for in terms of the mechanisms of the reactions involved. The acid-catalyzed xylene isomerization occurs via 1,2-methyl shifts in protonated xylenes (Figure 3). A mechanism via two transalkylation steps as proposed for synthetic faujasite (8) can be ruled out in view of the strictly consecutive nature of the isomerization sequence o m p and the low activity for disproportionation. Disproportionation involves a large diphenylmethane-type intermediate (Figure 4). It is suggested that this intermediate can form readily in the large intracrystalline cavity (diameter. 1.3 nm) of faujasite, but is sterically inhibited in the smaller pores of mordenite and ZSM-4 (d -0.8 nm) and especially of ZSM-5 (d -0.6 nm). Thus, transition state selectivity rather than shape selective diffusion are responsible for the high xylene isomerization selectivity of ZSM-5. [Pg.276]

Figure 2. Effect of intracrystalline cavity diameter of several zeolites on selectivity in xylene isomerization. Figure 2. Effect of intracrystalline cavity diameter of several zeolites on selectivity in xylene isomerization.
Figure 3. Acid catalyzed xylene isomerization mechanism. Figure 3. Acid catalyzed xylene isomerization mechanism.
Production of p-xylene via p-xylene removal, i.e., by crystallization or adsorption, and re-equilibration of the para-depleted stream requires recycle operation. Ethylbenzene in the feed must therefore be converted to lower or higher boiling products during the xylene isomerization step, otherwise it would build up in the recycle stream. With dual-functional catalysts, ethylbenzene is converted partly to xylenes and is partly hydrocracked. With mono-functional acid ZSM-5, ethylbenzene is converted at low temperature via transalkylation, and at higher temperature via transalkylation and dealkylation. In both cases, benzene of nitration grade purity is produced as a valuable by-product. [Pg.278]

In commercial xylene isomerization, it is desirable that the necessary ethylbenzene conversion is accompanied by a minimum conversion (transalkylation) of xylenes, since the latter constitutes a downgrading to less valuable products. The ability of ZSM-5 to convert ethylbenzene via transalkylation in high selectivity, as shown in Table II, leads to high ultimate p-xylene yields in a commercial process. With a simulated commercial feed containing 85% m- and o-xylene and 15% ethylbenzene, we have obtained the data shown in Table III. It is seen that for a given ethylbenzene conversion, the xylene loss... [Pg.280]

Table ill. Selectivity in Xylene Isomerization Feed 15% Ethylbenzene, 85% Xylene (63% m, 22% o)... [Pg.282]


See other pages where Xylenes, Isomeric is mentioned: [Pg.2790]    [Pg.412]    [Pg.422]    [Pg.222]    [Pg.815]    [Pg.224]    [Pg.224]    [Pg.425]    [Pg.426]    [Pg.29]    [Pg.1029]    [Pg.272]    [Pg.273]   
See also in sourсe #XX -- [ Pg.476 , Pg.480 ]




SEARCH



In xylene isomerization

Isomerization meta-xylene

Isomerization of xylenes

Isomerization para-xylene

Isomerization, ethylbenzene xylene

Isomerization, xylene

Isomerization, xylene

XYLENE ISOMERIZATION CATALYST

Xylene and Ethylbenzene Isomerization

Xylene isomerization acid catalyzed

Xylene isomerization containing ethylbenzene

Xylene isomerization faujasite zeolites

Xylene isomerization model reaction

Xylene isomerization selectivity

Xylene isomerization, zeolite membrane

Xylene isomerization, zeolites

Xylenes Mobil xylene isomerization process

Xylenes, catalyzed isomerization

Xylenes, selective isomerization

© 2024 chempedia.info