VINYL PYRROLIDONE POLYMER

Polymers and Rubbers Poly(vinyl pyrrolidone) polymer N/A — — 162... 

Depending upon the type of adsorbent and the final destination of the extract, various solvents or solvent mixtures are used to reextract pesticides from adsorbent cartridges. With Ci8, N-vinyl-pyrrolidone polymer, and PS-DVB materials, methanol, or acetonitrile is the eluent of choice when analyzing via LC instrumentation. With Cig cartridges and... 

SPE cartridges filled with Gig, N-vinyl-pyrrolidone polymer, or PS-DVB material analysis have been adopted for the off-line extraction of some fimgicides [53-56] and herbicides [50,57-67] from various t)q)es of water. 

Lau, C. and Mi, Y. (2002) A study of blending and complexation of poly(aciylic acid)/poly(vinyl pyrrolidone). Polymer, 43,... 

Poly(l-vinyl pyrrolidone- polymer N-Vinyl-2-pyrrolidone-vinyl acetate 25086-89-9... 

Poly(vinyl pyrrolidone). Another commercial polymer with significant usage is PVP (7). It was developed ia World War II as a plasma substitute for blood... 

Poly(vinyl pyrrolidone) (PVP) was introduced by the Germans in World War II as a blood plasma substitute.A water-soluble polymer, its main value is due to its ability to form loose addition compounds with many substances. 

In addition to its water solubility poly(vinyl pyrrolidone) is soluble in a very wide range of materials, including aliphatic halogenated hydrocarbons (methylene dichloride, chloroform), many monohydric and polyhdric alcohols (methanol, ethanol, ethylene glycol), some ketones (acetyl acetone) and lactones (a-butyrolactone), lower aliphatic acids (glacial acetic acid) and the nitro-paraffins. The polymer is also compatible with a wide range of other synthetic polymers, with gums and with plasticisers. 

As pointed out earlier, acrylics differ from the commonly used rubber precursors for PSA formulation in the fact that they often incorporate polar monomers, such as acrylic acid, A-vinyl pyrrolidone, vinyl acetate, or acrylamide. As a result, the solubility parameters of acrylic polymers are typically higher than those of rubbers, like polyisoprenes or polybutadienes. 

Water-soluble polymers eomprise a major elass of polymerie materials and are used in a wide variety of applieations. Synthetie water-soluble polymers inelude poly(vinyl aleohol), poly(aerylamide), poly(aerylie aeid), poly(ethylene oxide), poly(vinyl pyrrolidone), eellulosies, and many eopolymers of these types. Their end uses are quite varied and their applieations depend mainly on their viseosify-ing, rheologieal, and surfaee-aetive properties (1). For example, poly (vinyl aleohol) is used in adhesives, fibers, textile and paper sizing, paekaging, as a stabilizer for emulsion polymerization, and as a preeursor for the manufaeture of poly(vinyl butyral), whieh is used in automotive windshields. Poly(vinyl aleohol) is also the world s largest volume, eommodity, water-soluble polymer. 

In 1968, a French Patent issued to the Sumitomo Chemical Company disclosed the polymerization of several vinyl monomers in C02 [84], The United States version of this patent was issued in 1970, when Fukui and coworkers demonstrated the precipitation polymerization of several hydrocarbon monomers in liquid and supercritical C02 [85], As examples of this methodology, they demonstrated the preparation of the homopolymers PVC, PS, poly(acrylonitrile) (PAN), poly(acrylic acid) (PAA), and poly(vinyl acetate) (PVAc). In addition, they prepared the random copolymers PS-co-PMMA and PVC-co-PVAc. In 1986, the BASF Corporation was issued a Canadian Patent for the preparation of polymer powders through the precipitation polymerization of monomers in carbon dioxide at superatmospheric pressures [86], Monomers which were polymerized as examples in this patent included 2-hydroxyethylacrylate and iV-vinylcarboxamides such as iV-vinyl formamide and iV-vinyl pyrrolidone. 

An illustrative example is the work of Clark et al, on the conformation of poly(vinyl pyrrolidone) (PVP) adsorbed on silica 0). These authors determined bound fractions from magnetic resonance experiments. In one instance they added acetone to an aqueous solution of PVP in order to achieve theta conditions for this polymer. They expected to observe an increase in the bound fraction on the basis of solvency effects as predicted by all modern polymer adsorption theory (2-6), but found exactly the opposite effect. Their explanation was plausible, namely that acetone, with ability to adsorb strongly on silica due to its carbonyl group, would be able to partially displace the polymer by competing for the available surface sites. 

Granular swelling agents. These systems typically consist of cross-linked hydrophilic polymers like e.g. cross-linked poly-(N-vinyl pyrrolidone) or hydrophilic but insoluble polymers, e.g. cellulose that swell to a considerable volume within a few seconds on contact with water. These systems are powerful disintegrants and are used particularly in quick-release detergent tablets put in a dispenser tray. 

Lai, M.C., Hageman, M.J., Schowen, R.L., Borchardt, R.T., and Topp, E.M. 1999a. Chemical stability of peptides in polymers. 1. Effect of water on peptide deamidation in poly(vinyl alcohol) and poly(vinyl pyrrolidone) matrixes. J. Pharm. Sci. 88, 1073-1080. 

Radiation Induced Reactions. Graft polymers have been prepared from poly(vinyl alcohol) by the irradiation of the polymer-monomer system and some other methods. The grafted side chains reported include acrylamide, acrylic acid, acrylonitrile, ethyl acrylate, ethylene, ethyl methacrylate, methyl methacrylate, styrene, vinyl acetate, vinyl chloride, vinyl pyridine and vinyl pyrrolidone (13). Poly(vinyl alcohols) with grafted methyl methacrylate and sometimes methyl acrylate have been studied as membranes for hemodialysis (14). Graft polymers consisting of 50% poly(vinyl alcohol), 25% poly(vinyl acetate) and 25% grafted ethylene oxide units can be used to prepare capsule cases for drugs which do not require any additional plasticizers (15). 

With continuous development of systems for controlled drug release, new materials are being used whose influence on peptide stability must be carefully examined. Thus, the model hexapeptide Val-Tyr-Pro-Asn-Gly-Ala (Fig. 6.30) embedded in poly (vinyl alcohol) and poly(vinyl pyrrolidone) matrices had rates of deamidation that increased with increasing water content or water activity, and, hence, with decreasing glass transition temperature (Tg). However, the degradation behavior in the two polymers differed so that chemical reactivity could not be predicted from water content, water activity, or T% alone. Furthermore, the hexapeptide was less stable in such hydrated polymeric matrices than in aqueous buffer or lyophilized polymer-free powders [132],... 

Miyata and Nakashio [77] studied the effect of frequency and intensity on the thermally initiated (AIBN) bulk polymerisation of styrene and found that whilst the mechanism of polymerisation was not affected by the presence of ultrasound, the overall rate constant, k, decreased linearly with increase in the intensity whilst the average R.M.M. increased slightly. The decrease in the overall value of k they interpreted as being caused by either an increase in the termination reaction, specifically the termination rate constant, k, or a decrease in the initiator efficiency. The increase in kj(= kj /ri is the more reasonable in that ultrasound is known to reduce the viscosity of polymer solutions. This reduction in viscosity and consequent increase in Iq could account for our observed reductions [78] in initial rate of polymerisation of N-vinyl-pyrrolidone in water. However this explanation does not account for the large rate increase observed for the pure monomer system. 

The most examined monomers for template polymerization have been either acrylic or methacrylic acids. This is probably because many polymers, such as poly(ethylene oxide), PEG, and poly(vinyl pyrrolidone), PVP, form complexes with poly(acrylic acid). 

When the ratio of template to acid is close to 0.5, the viscosity of the product is more than 3 times higher than the viscosity of the polymer obtained without the template. PEO participates in the change of local concentration by interaction with carbonyl groups, but not in the activation. Solution of LiCl in N-methylpyrrolidone with PlOCeHsls was found very effective system for synthesis of amides by the direct reaction of acids with amines in the presence of polymeric matrix. High molecular weight poly(aminoacids) obtained by direct polycondensation reaction, promoted by triphenyl phosphite and LiCl in the presence of poly(vinylpyrrolidone), were synthesized by Higashi et al The results for polymerization of L-leucine in the presence of poly(vinyl pyrrolidone) are presented in the Table 6.3. 

Table 6.3 Effect of the amount of poly(vinyl pyrrolidone), PVP, on the polymerization of L-leucine using triphenyl phosphite in NMP. [Reprinted from N. Yamazaki and F. Higashi, Adv. Polym. Sci., 38,1 (1981)]...

Water-soluble polymer-bound porphorins have been prepared by the reaction of poly(methacrylic acid) and poly(N-vinyl pyrrolidone-co-methacrylic acid) with the low-molecular weight substituted Zn complexes tetraphenylpor-phorin, phthalocyanins and naphthocyanins [67, 68]. These reactions are... 

---