Vinyl ethers, cycloadditions with

A third mechanistically distinct [3 -1- 2] cycloaddition between vinyl ethers and vinyl-carbenoids was discovered and reported in 2001 [26]. This reaction is remarkable because when Rh2(S-DOSP)4 is used as the catalyst, the cis-cyclopentenes 142 are formed in up to 99% enantiomeric excess. The reaction occurs between vinylcarbenoids unsubstituted or alkyl-substituted at the vinyl terminus and vinyl ethers substituted with an aryl or vinyl group. Some illustrative examples are shown in Tab. 14.12. The reaction is considered to be a concerted process, which would be consistent with the highly stereoselective nature of the reaction [26]. Contrary to the [3-1-2] cycloaddition derived by means of vinylogous carbenoid reactivity, this latest [3 -1- 2] cycloaddition is not influenced by solvent effects. Due to steric demands on the carbenoid, the [3-1-2] cycloaddi-tion only occurs with cis-vinyl ethers. 

The cycloaddition with ethyl vinyl ether proceeded with excellent yield either under thermal conditions (80 °C, 5 days) or in the presence of LiC104 (20 °C, 17 h). In the former case a reasonable exo/endo and induced diastereoselectivity was observed, however using LiC104 the asymmetric induction was null. 

In some cases, the insertion of dichlorocarbene into the C-H bond of the cyclic vinyl ether competes with its cycloaddition. Furthermore, the structure of the products formed depends on the mode of carbene generation, e.g. formation of 1-4. ... 

A similar initiation mechanism was demonstrated for the interaction of vinyl ethers with vinylidene cyanide, but in this case both an anionic and cationic homopolymerization took place in the same polymerization flask, an unusual event which was termed "cohabitory polymerization . ° ° Later, Dan Chting 16,119 able to fish some 2+2 cycloaddition products out of the polymer mixture obtained when the vinyl ethers reacted with vinylidene cyanide, thus lending support to a reaction mechanism in which the radical cation-radical anion pair could collapse to form the cyclobutane derivative or separate to initiate polymerization. The fact that a 1 1 alternating copolymer was obtained in the presence of a radical initiator supported the existence of a charge transfer complex. 

Endo adducts are usually favored by iateractions between the double bonds of the diene and the carbonyl groups of the dienophile. As was mentioned ia the section on alkylation, the reaction of pyrrole compounds and maleic anhydride results ia a substitution at the 2-position of the pyrrole ring (34,44). Thiophene [110-02-1] forms a cycloaddition adduct with maleic anhydride but only under severe pressures and around 100°C (45). Addition of electron-withdrawiag substituents about the double bond of maleic anhydride increases rates of cycloaddition. Both a-(carbomethoxy)maleic anhydride [69327-00-0] and a-(phenylsulfonyl) maleic anhydride [120789-76-6] react with 1,3-dienes, styrenes, and vinyl ethers much faster than tetracyanoethylene [670-54-2] (46). 

Vinyl ethers undergo many cycloaddition reactions similar to those which take place with enamines. In general, however, these cycloaddition reactions with vinyl ethers take place less readily than those with enamines. These reactions include cycloaddition of vinyl ethers with ketene (200-205), phenyl isocyanate (206), sulfene (207,208), methyl acrylate (209), diethyl acetylenedicarboxylate (210), and diphenylnitrilimine (183). 

The 2,7-naphthyridine system 53 (Scheme 8.4.18) was combined with 2,4-dinitrochlorobenzene and 2-amino glycerol for in situ reaction of the resulting Zincke salt. The resulting naphthyridinium 54 was trapped by Bradsher cycloaddition with (Z)-vinyl ether 55, providing tetracycle 56 (X-ray) upon internal addition of one of the diastereotopic hydroxymethyl groups to the resulting iminium. This approach was also extended to the use of chiral 2,7-naphthyridinium salts, prepared via the analogous Zincke process. ... 

The stereochemistry of the product formed in the cycloaddition reaction depends on the approach of the substrate. There are two different approaches by which the reaction can proceed - endo and exo. For the reaction of e.g., a / , y-un-saturated a-keto ester with an ethyl vinyl ether there are four possible approaches... 

The chiral BOX-copper(ll) complexes, (S)-21a and (l )-21b (X=OTf, SbFg), were found by Evans et al. to catalyze the enantioselective cycloaddition reactions of the a,/ -unsaturated acyl phosphonates 49 with ethyl vinyl ether 46a and the cyclic enol ethers 50 giving the cycloaddition products 51 and 52, respectively, in very high yields and ee as outlined in Scheme 4.33 [38b]. It is notable that the acyclic and cyclic enol ethers react highly stereoselectively and that the same enantiomer is formed using (S)-21a and (J )-21b as the catalyst. It is, furthermore, of practical importance that the cycloaddition reaction can proceed in the presence of only 0.2 mol% (J )-21a (X=SbF6) with minimal reduction in the yield of the cycloaddition product and no loss of enantioselectivity (93% ee). 

More recently, further developments have shown that the reaction outlined in Scheme 4.33 can also proceed for other alkenes, such as silyl-enol ethers of acetophenone [48 b], which gives the endo diastereomer in up to 99% ee. It was also shown that / -ethyl-/ -methyl-substituted acyl phosphonate also can undergo a dia-stereo- and enantioselective cycloaddition reaction with ethyl vinyl ether catalyzed by the chiral Ph-BOX-copper(ll) catalyst. The preparative use of the cycloaddition reaction was demonstrated by performing reactions on the gram scale and showing that no special measures are required for the reaction and that the dihydro-pyrans can be obtained in high yield and with very high diastereo- and enantioselective excess. 

Our development of the catalytic enantioselective inverse electron-demand cycloaddition reaction [49], which was followed by related papers by Evans et al. [38, 48], focused in the initial phase on the reaction of mainly / , y-unsaturated a-keto esters 53 with ethyl vinyl ether 46a and 2,3-dihydrofuran 50a (Scheme 4.34). 

In a more recent work the same research group has applied cyclic and acyclic vinyl ethers in the oxazaborolidinone-catalyzed 1,3-dipolar cycloaddition reaction with nitrones [30]. The reaction between nitrone 5 and 2,3-dihydrofuran 6 with 20 mol% of the phenyl glycine-derived catalyst 3c, gave the product 7 in 56% yield as the sole diastereomer, however, with a low ee of 38% (Scheme 6.9). 

In an analogous study by Meske, the impact of various oxazaborolidinone catalysts for the 1,3-dipolar cycloaddition reactions between acyclic nitrones and vinyl ethers was studied [31]. Both the diastereo- and the enantioselectivities obtained in this work were low. The highest enantioselectivity was obtained by the application of 100 mol% of the tert-butyl-substituted oxazaborolidinone catalyst 3d [27, 32] in the 1,3-dipolar cycloaddition reaction between nitrone la and ethyl vinyl ether 8a giving endo-9a and exo-9a in 42% and 27% isolated yield, respectively, with up to 20% ee for endo-9a as the best result (Scheme 6.10). 

The above described reaction has been extended to the application of the AlMe-BINOL catalyst to reactions of acyclic nitrones. A series chiral AlMe-3,3 -diaryl-BINOL complexes llb-f was investigated as catalysts for the 1,3-dipolar cycloaddition reaction between the cyclic nitrone 14a and ethyl vinyl ether 8a [34], Surprisingly, these catalysts were not sufficiently selective for the reactions of cyclic nitrones with ethyl vinyl ether. Use of the tetramethoxy-substituted derivative llg as the catalyst for the reaction significantly improved the results (Scheme 6.14). In the presence of 10 mol% llg the reaction proceeded in a mixture of CH2CI2 and petroleum ether to give the product 15a in 79% isolated yield. The diastereoselectiv-ity was the same as in the acyclic case giving an excellent ratio of exo-15a and endo-15a of >95 <5, and exo-15a was obtained with up to 82% ee. 

Furukawa et al. also applied the above described palladium catalyst to the inverse electron-demand 1,3-dipolar cycloaddition of nitrones with vinyl ethers. However, all products obtained in this manner were racemic [81]. 

The reactions of nitrones constitute the absolute majority of metal-catalyzed asymmetric 1,3-dipolar cycloaddition reactions. Boron, aluminum, titanium, copper and palladium catalysts have been tested for the inverse electron-demand 1,3-dipolar cycloaddition reaction of nitrones with electron-rich alkenes. Fair enantioselectivities of up to 79% ee were obtained with oxazaborolidinone catalysts. However, the AlMe-3,3 -Ar-BINOL complexes proved to be superior for reactions of both acyclic and cyclic nitrones and more than >99% ee was obtained in some reactions. The Cu(OTf)2-BOX catalyst was efficient for reactions of the glyoxylate-derived nitrones with vinyl ethers and enantioselectivities of up to 93% ee were obtained. 

The Lewis acid-catalyzed reaction of nitrone 21 with ethyl vinyl ether 22 (Scheme 8.8) was also investigated for BH3 and AlMe3 coordinated to 21 [32]. The presence of BH3 decreases the activation energy for the formation of 23 by 3.1 and 4.5 kcal mol to 9.6 kcal mol for the exoselective reaction and 11.6 kcal-mol for the endo-selective reaction, respectively, while the activation energy for the formation of 24 increases by >1.4 kcal mol , compared to those for the uncatalyzed reaction. The transition-state structure for the BH3-exo-selective 1,3-dipolar cycloaddition reaction of nitrone 21 with ethyl vinyl ether 22 is shown in Fig. 8.19. 

Fig. 8.19 The calculated transition-state structure for the BH3-exo-selective 1,3-dipolar cycloaddition reaction of nitrone 21 with ethyl vinyl ether 22 [32 ...

Stabilised sulphur ylides react with alkenylcarbene complexes to form a mixture of different products depending on the reaction conditions. However, at -40 °C the reaction results in the formation of almost equimolecular amounts of vinyl ethers and diastereomeric cyclopropane derivatives. These cyclopropane products are derived from a formal [2C+1S] cycloaddition reaction and the mechanism that explains its formation implies an initial 1,4-addition to form a zwitterionic intermediate followed by cyclisation. Oxidation of the formed complex renders the final products [30] (Scheme 8). 

Commercial chromatography silica gel promotes effectual Diels-Alder cycloaddition of optically active pyrone lactate ester (5) with benzyl vinyl ether (6), affording the endo adduct 7 in an approximately 4 1 mixture of diastereoisomers [16] (Equation 4.1). 

Posner G. H., Anjeh T. E. N., Carry J. C., French A. N. A New and Efficient Asymmetric Synthesis of an A-Ring Precursor to Physiologically Active 1-a-Hydroxyvitamin D3 Steroids Proc. - NOBCChE 1994 21 383-389 Keywords inverse electron-demand Diels-Alder cycloadditions, (S)-lactate and Lewis acids (-)-Pr(hfc)3 with benzyl vinyl ether... 

The rhodium-mediated reaction of 69 with 2,3-dihydrofuran (a formal dipolar cycloaddition of a cyclic diazo dicarbonyl compound with a vinyl ether) yields 70. Corrqiound 70 can be transformed in a number of steps to 71 a,b <96TL2391>. 

When (62) was treated with ethyl vinyl ether the cycloadduct (63) is afforded. If (62) is reacted with electron donating dienophiles such as allyl alcohols, transesterification and intramolecular cycloaddition occurs in the presence of a catalytic amount of distannoxane catalyst to give cis-fused polycyclic systems such as (64) <96T733>. 

The [4+2] cycloaddition reaction of N-atylaldimines with vinyl ethers is effectively catalyzed by ytterbium(III) triflate to give quinoline derivatives (e.g., 50) in good yield <95S801>. 

Both ( )-l-phenylsulfonyl and (5)-(+)-3-p-tolylsulfmyl -alk-3-en-2-ones can exhibit high diastereoselectivity in their reactions with vinyl ethers and styrenes, with the dienophile having a dominant influence on the stereochemical outcome <96T1205,96TL3687>. Indol-2-ylideneacetic acid esters can act as both dienophile and heterodiene in cycloaddition reactions in the latter case pyrano[3,2-h]indoles are formed <96SYN519>. 

Scheme 10.9 Rh2(5-DOSP)4-catalysed 1,3-dipolar cycloadditions of vinyldiazocarbonyl derivatives with vinyl ethers.

---