Urethane adhesives moisture-cured

TissuGlu (Cohera Medical, Pittsburgh, PA, USA) is a lysine-derived urethane adhesive which cures in the presence of moisture. This is applied to the abdominal wall prior to closure of the abdominoplasty flap to reduce wound drainage and seroma formation. The safety and efficacy of TissuGlu have been demonstrated in preclinical and clinical studies [53, 54]. 

The vast majority of reactive hot melts are moisture-curing urethane adhesives. Radiation (UV/EB) curable adhesives have been explored in the laboratory since the mid-1970s, but are only recently beginning to gain significant market penetration, particularly for PSA applications. The formulation and properties of these two classes of adhesives are discussed below. 

Effect of moisture cure on properties of a urethane-based hot melt adhesive... 

The reaction of water with isocyanate is shown in the third item of Fig. 1 [5]. The water/isocyanate reaction is the major curing mechanism for the one-component urethane adhesives. Most one-component urethanes are based on an isocyanate-terminated prepolymer (I). Usually, the moisture in the air is used to cure the adhesive, but in some instances, a fine mist of water may be introduced on top of the adhesive before the bond is closed, in order to facilitate cure ... 

Several large applications for one-component moisture-cure urethane adhesives are available. Polymeric MDI is an exceptional binder for wood products, such as oriented strand board and particleboard. One-component urethane windshield adhesives are used almost exclusively in both the OEM and automotive aftermarket. One-part urethane adhesives are used to assemble the sidewalls for recreational vehicles (RV s), manufactured housing, and mobile homes. In construction applications, one-part urethanes are used to bond metal doors, hardwood flooring, panels, and partitions. 

Catalysts serve a dual purpose in one-component moisture-curing urethanes. The first purpose is to accelerate the prepolymer synthesis. The second purpose is to catalyze the curing reaction of the adhesive with moisture. The most common catalysts used to promote both prepolymer formation (NCO/OH) and later the adhesive curing reaction (NCO/H2O) are dibutyltin dilaurate and DMDEE ((tertiary amine. A stabilizer such as 2,5-pentanedione is sometimes added when tin is used, but this specific stabilizer has fallen from favor in recent years, due to toxicity concerns. DMDEE is commonly used in many one-component moisture-curing urethanes. DMDEE is one of the few tertiary amines with a low alkalinity and a low vapor pressure. The latter... 

Moisture-curing hot melts are a small but fast growing segment of the urethane adhesive market. They are used mostly in construction and furniture assembly applications. Recent applications include RV sidewall assembly and other OEM automotive applications. Smaller applications include bookbinding and footwear. A typical adhesive is shown below ... 

Acrylic adhesives cure by a free radical chain growth mechanism. In contrast, epoxy and urethane adhesives cure by a step growth mechanism. This has a major impact on the cure kinetics, as well as the composition of the adhesive during cure ([9], pp. 6-9). Cyanoacrylate adhesives (such as Super Glue ) also cure by chain growth, but the mechanism is ionic with initiation by surface moisture. 

Epoxy-urethane adhesives provide properties when cured that are similar to those of epoxynylon adhesives except they offer a major improvement in moisture resistance. Isocyanate monomers and prepolymer react with the hydroxyl groups on epoxy resins to give tough,... 

Organic zinc-rich primers are based on epoxy/polyamides, high-molecular-weight linear epoxies, moisture-cured urethanes, high-styrene resins, chlorinated rubbers and epoxy esters. In this type of primer zinc is covered with a monomolecular layer of the binder which facilitates the adhesion of the film to the substrate. 

Most urethane adhesives are based on urethane prepolymers. A prepolymer is made by reacting an excess of diisocyanate with a polyol to yield an isocyanate-terminated urethane as shown in Fig. 11. Prepolymers may have exeess isocyanate present ( quasiprepolymers ) or they may be made in a 2 1 stoichiometric ratio to minimize the amount of free isocyanate monomer present. Most moisture-cured prepolymers are based on 2 1 stoichiometric ratios. Two-component adhesives generally are based on quasi-prepolymers, which use the excess isocyanate to react with either chain extenders present in the other component or with the substrate surface. 

The second major classification of common polyurethane adhesives is the two-component system. Two-component polyurethane adhesives are widely used where fast cure speeds are critical, as on OEM (original equipment manufacturers) assembly lines that require quick fixture of parts, especially at ambient or low bake temperatures. Two-component urethanes are required in laminating applications where no substrate moisture is available or where moisture cannot penetrate through to the adhesive bond. Two-component urethanes are also useful where CO2 (generated by a one-component moisture cure) or a volatile blocking agent would interfere with the adhesive properties. 

The most common textile adhesives are available as solutions in water or solvent, as dispersions in water, or as solids that melt under the appUcation of heat. However, 100% reactive liquid adhesives such as epoxies and moisture-cured urethanes are also used. 

Table IV. Physical Properties of Some Moisture Cure Urethane Structural Adhesives...

---