Trimeric alcohol

By hydrogenation of these dimeric or trimeric acids the corresponding diols or triols are obtained. The dimer alcohol (Figure 17.12) has an hydroxyl number of 202-212 mg KOH/g and a molecular weight of 565 daltons and a viscosity of around 3,500 mPa-s at 25 °C [73, 74]. Trimer alcohols (Figure 17.13) have an hydroxyl number about 205 mg KOH/g and a viscosity of around 9,500 mPa-s at 25 °C [74]. 

Dimer and trimer alcohols introduced into the structure of PU confer on them very high hydrophobicity, water repellency, flexibility and chemical stability. The polyester urethanes based on dimeric diols and dimeric acids are the most hydrolysis resistant polyester urethanes known so far [73]. 

The carbonation of polymeric carbanions using carbon dioxide is one of the simplest, most useful, and widely used functionalization reactions. However, there are special problems associated with the simple carbonation of polymeric organolithium compounds. Eor example, when carbonations with high-purity, gaseous carbon dioxide are carried out in benzene solution at room temperature using standard high vacuum techniques, the carboxylated polymer is obtained in only 27-66% yield for PSLi, PILi, and poly(styrene-b-isopre-nyl)lithium. The functionalized polymer is contaminated with dimeric ketone (23-27%) and trimeric alcohol (7-50%)... 

Miscellaneous Reactions. Sodium bisulfite adds to acetaldehyde to form a white crystalline addition compound, insoluble in ethyl alcohol and ether. This bisulfite addition compound is frequendy used to isolate and purify acetaldehyde, which may be regenerated with dilute acid. Hydrocyanic acid adds to acetaldehyde in the presence of an alkaU catalyst to form cyanohydrin the cyanohydrin may also be prepared from sodium cyanide and the bisulfite addition compound. Acrylonittile [107-13-1] (qv) can be made from acetaldehyde and hydrocyanic acid by heating the cyanohydrin that is formed to 600—700°C (77). Alanine [302-72-7] can be prepared by the reaction of an ammonium salt and an alkaU metal cyanide with acetaldehyde this is a general method for the preparation of a-amino acids called the Strecker amino acids synthesis. Grignard reagents add readily to acetaldehyde, the final product being a secondary alcohol. Thioacetaldehyde [2765-04-0] is formed by reaction of acetaldehyde with hydrogen sulfide thioacetaldehyde polymerizes readily to the trimer. 

In the presence of suitable nickel or cobalt complexes, propargyl alcohol trimerizes to a mixture of l,3,5-ben2enetrimethanol [4464-18-0] and 1,2,4-trimethanol [25147-76-6] hen-zene (28). 

Nickel halide complexes with amines give mixtures of linear polymer and cychc trimers (30). Nickel chelates give up to 40% of linear polymer (31). When heated with ammonia over cadmium calcium phosphate catalysts, propargyl alcohol gives a mixture of pyridines (32). 

The use of polar solvents, such as /V, /V- dim ethyl fo rm am i de [68-12-2] is noted to result in extensive trimer formation. However, if the isocyanate is trapped using compounds such as alcohols, carboxyUc acids, and amines which contain active hydrogen, high yields are obtained (93). 

The stringency of the conditions employed in the unmodified cobalt 0x0 process leads to formation of heavy trimer esters and acetals (2). Although largely supplanted by low pressure ligand-modified rhodium-catalyzed processes, the unmodified cobalt 0x0 process is stiU employed in some instances for propylene to give a low, eg, - 3.3-3.5 1 isomer ratio product mix, and for low reactivity mixed and/or branched-olefin feedstocks, eg, propylene trimers from the polygas reaction, to produce isodecanol plasticizer alcohol. 

The propylene-based chemicals, n- and isobutanol and 2-ethyl-1-hexanol [104-76-7] (2-EH) dominate the product spectmm. These chemicals represent 71% of the world s total oxo chemical capacity. In much of the developed world, plasticizers (qv), long based on 2-EH, are more often and more frequendy higher molecular weight, less volatile Cg, and C q alcohols such as isononyl alcohol, from dimerized normal butenes isodecanol, from propylene trimer and 2-propyl-1-heptanol, from / -butenes and aldol addition. Because of the competition from the higher molecular weight plasticizer alcohols,... 

The cychc haUdes can be converted to discrete substitution products by reaction with amines, alcohol, or alkylating agents. For example, (NPCl ) reacts with ammonia to form (NP(NH2)2)3 [13597-92-7] withy -NaOCgH CH to form (NP(OCgH4CH2)2)3 [27122-73-2] and with CH MgCl to form (NP(CH3)2)3 [6607-30-3]. Among the cychc members, the trimeric haUdes are the most inert toward substitution and tetrameric haUdes are the most active. 

Alkylation with a vatiety of common alkyl halides oi sulfates gives stable dialkylcyanamides. However, the intermediate monoalkylated compounds usually cannot be isolated and cychc trimers or cotrimers with cyanamide ate obtained (13). The reaction can be carried out efficientiy in water or alcohol. Allyl chloride is an especially useful reagent, producing diallylcyanamide [538-08-9J (4). 

Filter P per Processing. In the fabrication of fuel oil and air filters for vehicles such as motorcycles and diesel locomotives, heat processing of the filter paper is required to cure the resin (usually phenoHc) with which the paper (qv) is impregnated (see Phenolic resins). The cure-oven exhaust, which contains water vapor, alcohols, and dimers and trimers of phenol, produces a typical blue haze aerosol having a pungent odor. The concentration of organic substances in the exhaust is usually rather low. 

Other olefins applied in the hydroformylation process with subsequent hydrogenation are propylene trimer and tetramer for the production of decyl and tridecyl alcohols, respectively, and C7 olefins (from copolymers of C3 and C4 olefins) for isodecyl alcohol production. 

A mechanism for its formation was also proposed. Essentially, this involved protonation of 2-methylfuran followed by dimerization and trimerization to a 2,4-difuryl tetrahydrofuran derivative which suffered an acid catalysed cleavage of the saturated ring to produce a carbenium ion possessing an alcoholic function at the other end of... 

It is well known that the trimeric phosphonitri-lic chloride can be polymerized, at 200-300°C, to poly(dichlorophosphazene) (1), hereafter this polymer will be referred to as chloropolymer. Since this polymer contains hydrolytically-unstable chlorine groups, these groups are usually replaced with various alcohols, phenols, or amines to import the polymer stability. In our laboratories, the substitution is generally with alcohols or phenols. The reaction scheme is shown in Figure 1. 

Figure 1. Scheme showing the polymerization of the trimeric phosphonitrilic chloride to poly(dichlorophosphazene) and its subsequent substitution with the sodium salts of alcohols or phenols... 

The second approach (Equation(3)) has a number of advantages over the first one (Equation(2)). The alkyl complexes are more reactive than the related alkoxides, the latter being for group 4 elements generally associated into dimers or trimers 48 also, reaction (2) liberates an alcohol which may further react with the surface of silica, whereas the alkane ( Equation(3)) is inert. It was demonstrated by various spectroscopic techniques and elemental analysis that with a silica dehydroxylated at 500 °C under vacuum, the stoichiometry of reaction (3) corresponds to n = 1.45,46 Moreover, a better control of the surface reaction was achieved with the procedure represented in Equation(3). 

Another functionalized alcohol, namely 2-aziridineethanol (azol), reacted with diethylzinc to yield almost quantitatively the ethylzinc alkoxide EtZn(azol), which is trimeric in solution.216 The introduction of dry dioxygen into solutions of EtZn(azol) gave the peroxoethylzinc alkoxide EtOOZn(azol), which co-crystallized with EtZn(azol) in a 1 1 ratio as a face-sharing di- o-heterocube 150 (Figure 70). 

Figure 1. Illustration of lone electron pair preferences in alcohol dimers, cooperative and anticooperative binding sites for a third monomer, ring strain and steric repulsion in alcohol trimers, alternation of residues in alcohol tetramers, and chain, branch, and cyclic hydrogen bond topologies in larger clusters.

---