Transition titanium

The interstitial carbides These are formed by the transition metals (e.g. titanium, iron) and have the general formula M, C. They are often non-stoichiometric—the carbon atoms can occupy some or all of the small spaces between the larger metal atoms, the arrangement of which remains essentially the same as in the pure metal (cf. the interstitial hydrides). 

Titanium is not a rare element it is the most abundant transition metal after iron, and is widely distributed in the earth s surface, mainly as the dioxide TiOj and ilmenite FeTi03. It has become of commercial importance since World War II mainly because of its high strength-weight ratio (use in aircraft, especially supersonic), its... 

In this oxidation state the titanium atom has formally lost its 3d and 4s electrons as expected, therefore, it forms compounds which do not have the characteristics of transition metal compounds, and which indeed show strong resemblances to the corresponding compounds of the lower elements (Si, Ge, Sn, Pb) of Group IV—the group into which Mendeleef put titanium in his original form of the periodic table. 

Several structures of the transition state have been proposed (I. D. Williams, 1984 K. A. Jorgensen, 1987 E.J. Corey, 1990 C S. Takano, 1991). They are compatible with most data, such as the observed stereoselectivity, NMR measuiements (M.O. Finn, 1983), and X-ray structures of titanium complexes with tartaric acid derivatives (I.D. Williams, 1984). The models, e. g., Jorgensen s and Corey s, are, however, not compatible with each other. One may predict that there is no single dominant Sharpless transition state (as has been found in the similar case of the Wittig reaction see p. 29f.). 

Section 14 15 Coordination polymerization of ethylene and propene has the biggest eco nomic impact of any organic chemical process Ziegler-Natta polymer ization IS carried out using catalysts derived from transition metals such as titanium and zirconium tt Bonded and ct bonded organometallic com pounds are intermediates m coordination polymerization... 

Transesterification of methyl methacrylate with the appropriate alcohol is often the preferred method of preparing higher alkyl and functional methacrylates. The reaction is driven to completion by the use of excess methyl methacrylate and by removal of the methyl methacrylate—methanol a2eotrope. A variety of catalysts have been used, including acids and bases and transition-metal compounds such as dialkjitin oxides (57), titanium(IV) alkoxides (58), and zirconium acetoacetate (59). The use of the transition-metal catalysts allows reaction under nearly neutral conditions and is therefore more tolerant of sensitive functionality in the ester alcohol moiety. In addition, transition-metal catalysts often exhibit higher selectivities than acidic catalysts, particularly with respect to by-product ether formation. 

High density polyethylene (HDPE) is defined by ASTM D1248-84 as a product of ethylene polymerisation with a density of 0.940 g/cm or higher. This range includes both homopolymers of ethylene and its copolymers with small amounts of a-olefins. The first commercial processes for HDPE manufacture were developed in the early 1950s and utilised a variety of transition-metal polymerisation catalysts based on molybdenum (1), chromium (2,3), and titanium (4). Commercial production of HDPE was started in 1956 in the United States by Phillips Petroleum Company and in Europe by Hoechst (5). HDPE is one of the largest volume commodity plastics produced in the world, with a worldwide capacity in 1994 of over 14 x 10 t/yr and a 32% share of the total polyethylene production. 

HDPE resias are produced ia industry with several classes of catalysts, ie, catalysts based on chromium oxides (Phillips), catalysts utilising organochromium compounds, catalysts based on titanium or vanadium compounds (Ziegler), and metallocene catalysts (33—35). A large number of additional catalysts have been developed by utilising transition metals such as scandium, cobalt, nickel, niobium, molybdenum, tungsten, palladium, rhodium, mthenium, lanthanides, and actinides (33—35) none of these, however, are commercially significant. 

Sodium ethoxide was the first metal alkoxide described in 1837 (1). The alkoxides of many transition metals were developed after World War II (2—5). Today some alkoxides, including those of sodium, potassium, magnesium, aluminum, zirconium, and titanium, are commercially important. The name metal alkoxides is preferred, although metal alcoholates is also used. 

Stmctures are highly varied among the transition metals. The titanium atom in titanium tetraethoxide has the coordination number 6 (Fig. 1). The corresponding zirconium compound, with coordination number 8, has a different stmcture (Fig. 2). Metal alkoxides are colored when the corresponding metal ions are colored, otherwise they are not. 

Magnesium reacts slowly at lower temperatures to give the amide, as do all active metals this reaction is catalyzed by transition metal ions. Aluminum nitride [24304-00-5] AIN, barium nitride [12047-79-9] Ba2N2, calcium nitride [12013-82-0] Ca2N2, strontium nitride [12033-82-8], Sr2N2, and titanium nitride [25583-20-4], TiN, may be formed by heating the corresponding amides. 

Special Alloys. AHoys of tin with the rater metals, such as niobium, titanium, and 2kconium, have been developed. The single-phase alloy Nb Sn [12035-04-0] has the highest transition temperature of any known superconductor (18 K) and appears to keep its superconductivity in magnetic... 

Titanium alloyed with niobium exhibits superconductivity, and a lack of electrical resistance below 10 K. Composition ranges from 25 to 50 wt % Ti. These alloys are P-phase alloys having superconducting transitional temperatures at ca 10 K. Thek use is of interest for power generation, propulsion devices, fusion research, and electronic devices (52). 

Titanium is the first member of the t7-block transition elements. Its electron configuration is [Ar] and successive ionisation potentials are 6.83,... 

This can be circumvented by choosing alkyl groups with no P H, eg, methyl, neopentyl, trimethylsilylmethyl, phenyl and other aryl groups, and benzyl. The linear transition state for -elimination can also be made stericaHy impossible. The most successful technique for stabilization combines both principles. The pentahaptocyclopentadienyl ring anion (Cp) has six TT-electrons available to share with titanium. Biscyclopentadienyltitanium dichloride... 

Possibly because of price and performance competition from chromium, titanium, and other transition elements, only about a dozen vanadium compounds are commercially significant of these, vanadium pentoxide is dominant. 

Cocatalysts, such as diethylzinc and triethylboron, can be used to alter the molecular-weight distribution of the polymer (89). The same effect can also be had by varying the transition metal in the catalyst chromium-based catalyst systems produce polyethylenes with intermediate or broad molecular-weight distributions, but titanium catalysts tend to give rather narrow molecular-weight distributions. 

MetaUic conduction occurs in transition-metal oxides such as ReO, vanadium(II) oxide [12035-98-2] VO, titanium(II) oxide [12137-20-17,... 

Transition metal-catalyzed epoxidations, by peracids or peroxides, are complex and diverse in their reaction mechanisms (Section 5.05.4.2.2) (77MI50300). However, most advantageous conversions are possible using metal complexes. The use of t-butyl hydroperoxide with titanium tetraisopropoxide in the presence of tartrates gave asymmetric epoxides of 90-95% optical purity (80JA5974). 

---