Separation transition metals

Neary, M. P., Seitz, P., Hercules, D. M. A chemiluminescence detector for transition metals separated by ion exchange. Anal. Lett. 7, 583 (1974)... 

Metallo-silanols with the Silicon and Transition Metal Separated by a Spacer Group... 

Figure 4.61 Overview of the equilibria involved in transition metal separations.

Fig. 4-53. Simultaneous analysis of nine different transition metals. — Separator column lonPac CSS eluant 4 mmol/L pyridine-2,6-dicarboxylic acid +...

Ion chromatography can also be applied for ultra-trace analysis of transition metals. In comparison to ICP-MS it offers the advantageous ability to specify the oxidation state of metals and, moreover, to carry out multi-element determinations in the lowest ng/L range after pre-concentration. Transition metal separation is performed with ion exchangers that have defined anion and cation exchange capacities detection is carried out photometrically after derivatization... 

A review of very-mixed -metal carbonyl clusters, covering complexes containing transition metals separated by at least three d-block groups has been published, and Adams has briefly reviewed the reactivity of segregated bimetallic clusters and their role in catalysis. ... 

Reference has been made already to the existence of a set of inner transition elements, following lanthanum, in which the quantum level being filled is neither the outer quantum level nor the penultimate level, but the next inner. These elements, together with yttrium (a transition metal), were called the rare earths , since they occurred in uncommon mixtures of what were believed to be earths or oxides. With the recognition of their special structure, the elements from lanthanum to lutetium were re-named the lanthanons or lanthanides. They resemble one another very closely, so much so that their separation presented a major problem, since all their compounds are very much alike. They exhibit oxidation state -i-3 and show in this state predominantly ionic characteristics—the ions. 

For transition metal complexes with several possible spin arrangements, a separate calculation within each spin multiplicity may be required to find the ground state of the complex. 

Properties. A suimnaiy of the chemical and physical properties of alkah-metal and ammonium fLuoroborates is given in Tables 2 and 3. Chemically these compounds differ from the transition-metal fLuoroborates usually separating in anhydrous form. This group is very soluble in water, except for the K, Rb, and Cs salts which ate only slighdy soluble. Many of the soluble salts crystallize as hydrates. 

Alcohol autoxidation is carried out in the range of 70—160°C and 1000—2000 kPa (10—20 atm). These conditions maintain the product and reactants as Hquids and are near optimum for practical hydrogen peroxide production rates. Several additives including acids, nitriles, stabHizers, and sequestered transition-metal oxides reportedly improve process economics. The product mixture, containing hydrogen peroxide, water, acetone, and residual isopropyl alcohol, is separated in a wiped film evaporator. The organics and water are taken overhead and further refined to recover by-product acetone and the... 

Cordierite [12182-53-5] Mg Al Si O g, is a ceramic made from talc (25%), kaolin (65%), and Al O (10%). It has the lowest thermal expansion coefficient of any commercial ceramic and thus tremendous thermal shock resistance. It has traditionally been used for kiln furniture and mote recently for automotive exhaust catalyst substrates. In the latter, the cordierite taw materials ate mixed as a wet paste, extmded into the honeycomb shape, then dried and fired. The finished part is coated with transition-metal catalysts in a separate process. 

Abstract—Carbon nanotubules were produced in a large amount by catalytic decomposition of acetylene in the presence of various supported transition metal catalysts. The influence of different parameters such as the nature of the support, the size of active metal particles and the reaction conditions on the formation of nanotubules was studied. The process was optimized towards the production of nanotubules having the same diameters as the fullerene tubules obtained from the arc-discharge method. The separation of tubules from the substrate, their purification and opening were also investigated. 

Lower oxidation states are rather sparsely represented for Zr and Hf. Even for Ti they are readily oxidized to +4 but they are undoubtedly well defined and, whatever arguments may be advanced against applying the description to Sc, there is no doubt that Ti is a transition metal . In aqueous solution Ti can be prepared by reduction of Ti, either with Zn and dilute acid or electrolytically, and it exists in dilute acids as the violet, octahedral [Ti(H20)6] + ion (p. 970). Although this is subject to a certain amount of hydrolysis, normal salts such as halides and sulfates can be separated. Zr and are known mainly as the trihalides or their derivatives and have no aqueous chemistry since they reduce water. Table 21.2 (p. 960) gives the oxidation states and stereochemistries found in the complexes of Ti, Zr and Hf along with illustrative examples. (See also pp. 1281-2.)... 

Transition metal catalysis in liquid/liquid biphasic systems principally requires sufficient solubility and immobilization of the catalysts in the IL phase relative to the extraction phase. Solubilization of metal ions in ILs can be separated into processes, involving the dissolution of simple metal salts (often through coordination with anions from the ionic liquid) and the dissolution of metal coordination complexes, in which the metal coordination sphere remains intact. 

These advantages notwithstanding, the proportion of homogeneous catalyzed reactions in industrial chemistry is still quite low. The main reason for this is the difficulty in separating the homogeneously dissolved catalyst from the products and by-products after the reaction. Since the transition metal complexes used in homogeneous catalysis are usually quite expensive, complete catalyst recovery is crucial in a commercial situation. 

Ionic liquids have already been demonstrated to be effective membrane materials for gas separation when supported within a porous polymer support. However, supported ionic liquid membranes offer another versatile approach by which to perform two-phase catalysis. This technology combines some of the advantages of the ionic liquid as a catalyst solvent with the ruggedness of the ionic liquid-polymer gels. Transition metal complexes based on palladium or rhodium have been incorporated into gas-permeable polymer gels composed of [BMIM][PFg] and poly(vinyli-dene fluoride)-hexafluoropropylene copolymer and have been used to investigate the hydrogenation of propene [21]. 

In comparison with catalytic reactions in compressed CO2 alone, many transition metal complexes are much more soluble in ionic liquids without the need for special ligands. Moreover, the ionic liquid catalyst phase provides the potential to activate and tune the organometallic catalyst. Furthermore, product separation from the catalyst is now possible without exposure of the catalyst to changes of temperature, pressure, or substrate concentration. 

---