Titration reductants

This provides a method of estimating an iron(lll) salt. After reduction the iron(II) salt is titrated with manganate(VII) solution. 

The procedure is to pass purified hydrogen through a hot solution of the pure acid chloride in toluene or xylene in the presence of the catalyst the exit gases are bubbled through water to absorb the hydrogen chloride, and the solution is titrated with standard alkali from time to time so that the reduction may be stopped when the theoretical quantity of hydrogen chloride has been evolved. Further reduction would lead to the corresponding alcohol and hydrocarbon ... 

The imides, primaiy and secondary nitro compounds, oximes and sulphon amides of Solubility Group III are weakly acidic nitrogen compounds they cannot be titrated satisfactorily with a standard alkaU nor do they exhibit the reactions characteristic of phenols. The neutral nitrogen compounds of Solubility Group VII include tertiary nitro compounds amides (simple and substituted) derivatives of aldehydes and ketones (hydrazones, semlcarb-azones, ete.) nitriles nitroso, azo, hydrazo and other Intermediate reduction products of aromatic nitro compounds. All the above nitrogen compounds, and also the sulphonamides of Solubility Group VII, respond, with few exceptions, to the same classification reactions (reduction and hydrolysis) and hence will be considered together. 

Masking by oxidation or reduction of a metal ion to a state which does not react with EDTA is occasionally of value. For example, Fe(III) (log K- y 24.23) in acidic media may be reduced to Fe(II) (log K-yyy = 14.33) by ascorbic acid in this state iron does not interfere in the titration of some trivalent and tetravalent ions in strong acidic medium (pH 0 to 2). Similarly, Hg(II) can be reduced to the metal. In favorable conditions, Cr(III) may be oxidized by alkaline peroxide to chromate which does not complex with EDTA. 

A titration in which the reaction between the analyte and titrant is an oxidation/reduction reaction. 

Controllcd-Currcnt Coulomctry The use of a mediator makes controlled-current coulometry a more versatile analytical method than controlled-potential coulome-try. For example, the direct oxidation or reduction of a protein at the working electrode in controlled-potential coulometry is difficult if the protein s active redox site lies deep within its structure. The controlled-current coulometric analysis of the protein is made possible, however, by coupling its oxidation or reduction to a mediator that is reduced or oxidized at the working electrode. Controlled-current coulometric methods have been developed for many of the same analytes that may be determined by conventional redox titrimetry. These methods, several of which are summarized in Table 11.9, also are called coulometric redox titrations. 

Coupling the mediator s oxidation or reduction to an acid-base, precipitation, or complexation reaction involving the analyte allows for the coulometric titration of analytes that are not easily oxidized or reduced. For example, when using H2O as a mediator, oxidation at the anode produces H3O+... 

If the oxidation or reduction of H2O is carried out externally using the generator cell shown in Figure 11.25, then H3O+ or OH can be dispensed selectively into a solution containing a basic or acidic analyte. The resulting reaction is identical to that in an acid-base titration. Coulometric acid-base titrations have been used for... 

Any Fe + lost in this fashion must be replaced by the additional reduction of Fe +, reducing the current efficiency and increasing the time needed to reach the titration s end point. The net result is that the reported concentration of Cr207 is too large. 

Titrimetric Methods. Frequently, the reduction of gold solutions leads to finely divided precipitates which are difficult to recover quantitatively. In such cases, the reduction of Au(III) to Au(0) by, eg, hydroquinone, can be followed potentiometricaHy (49). The end point in such titrations also can be determined with indicators such as benzidine (50) or o-anisidine (51). Alternatively, the reduction can be effected with excess hydroquinone which is then back-titrated with Ce(IV) (52). lodometric deterrnination of Au(III) also is useflil (53). 

Ofner Method. This method is for the determination of invert sugar in products with up to 10% invert in the presence of sucrose and is a copper-reduction method that uses Ofner s solution instead of Fehling s. The reduced cuprous oxide is treated with excess standardized iodine, which is black-titrated with thiosulfate using starch indicator. 

Ana.lytica.1 Methods. Various analytical methods involve titration with oxidants, eg, hexacyanoferrate (ferricyanide), which oxidize dithionites to sulfite. lodimetric titration to sulfate in the presence of formaldehyde enables dithionite to be distinguished from sulfite because aldehyde adducts of sulfite are not oxidized by iodine. Reductive bleaching of dyes can be used to determine dithionite, the extent of reduction being deterrnined photometrically. Methods for determining mixtures of dithionite, sulfite, and thiosulfates have been reviewed (365). Analysis of dithionite particularly for thiosulfate, a frequent and undesirable impurity, can be done easily by Hquid chromatography (366). 

Reduction. Triaryknethane dyes are reduced readily to leuco bases with a variety of reagents, including sodium hydrosulfite, 2inc and acid (hydrochloric, acetic), 2inc dust and ammonia, and titanous chloride in concentrated hydrochloric acid. Reduction with titanium trichloride (Knecht method) is used for rapidly assaying triaryknethane dyes. The TiCl titration is carried out to a colorless end point which is usually very sharp (see Titanium COMPOUNDS, inorganic). 

In an oversimplified way, it may be stated that acids of the volcanoes have reacted with the bases of the rocks the compositions of the ocean (which is at the fkst end pokit (pH = 8) of the titration of a strong acid with a carbonate) and the atmosphere (which with its 2 = 10 atm atm is nearly ki equdibrium with the ocean) reflect the proton balance of reaction 1. Oxidation and reduction are accompanied by proton release and proton consumption, respectively. In order to maintain charge balance, the production of electrons, e, must eventually be balanced by the production of. The redox potential of the steady-state system is given by the partial pressure of oxygen (0.2 atm). Furthermore, the dissolution of rocks and the precipitation of minerals are accompanied by consumption and release, respectively. 

Chlorate Analysis. Chlorate ion concentration is determined by reaction with a reducing agent. Ferrous sulfate is preferred for quaHty control (111), but other reagents, such as arsenious acid, stannous chloride, and potassium iodide, have also been used (112). When ferrous sulfate is used, a measured excess of the reagent is added to a strong hydrochloric acid solution of the chlorate for reduction, after which the excess ferrous sulfate is titrated with an oxidant, usually potassium permanganate or potassium dichromate. 

When a solution of chromic and sulfuric acids in water is added at 0-20° to an alcohol or formate dissolved in acetone, a rapid oxidation takes place with the separation of the green chromium III reduction product as a separate layer. This system is commonly known as Jones reagent. The rate of oxidation is so fast that it is often possible to run the reaction as a titration to an... 

The process is one of electrolytic reduction and the apparatus is similar to that shown in Fig. 77, p. 144. It consists of a small porous cell (8 cm. x 2 cm. diam.) surrounded by a narrow beaher (ii cm. X 6 cm. diam.). The oxalic acid, mixed w lth too c.f. 10 per cent sulphuric acid (titrated against standard baryl.a solution] forms the cathode liquid and is placed in Iht beakei. The porous cell is filled with the same strength of siilphuiic acid and foims the anode liquid. The electrodes ara made from 01 dinary clean sheet lead. The anode consists of i thiu strip projecting about two inches from the cell and tliu... 

The last definition has widespread use in the volumetric analysis of solutions. If a fixed amount of reagent is present in a solution, it can be diluted to any desired normality by application of the general dilution formula V,N, = V N. Here, subscripts 1 and 2 refer to the initial solution and the final (diluted) solution, respectively V denotes the solution volume (in milliliters) and N the solution normality. The product VjN, expresses the amount of the reagent in gram-milliequivalents present in a volume V, ml of a solution of normality N,. Numerically, it represents the volume of a one normal (IN) solution chemically equivalent to the original solution of volume V, and of normality N,. The same equation V N, = V N is also applicable in a different context, in problems involving acid-base neutralization, oxidation-reduction, precipitation, or other types of titration reactions. The justification for this formula relies on the fact that substances always react in titrations, in chemically equivalent amounts. 

---