Titanium silyls

Numerous modifications of chromium-based catalysts have been made through the introduction of various additives, the most effective of which are titanium alkoxides (38,39). These additives apparentiy reduce surface silyl chromate moieties to chromium titanates, which are then oxidized to titanyl chromates. These catalysts offer a better control of the resin molecular weight (39). 

A related tert-butylation procedure in which the silyl enol ether is added to a mixture of titanium tetrachloride and tert-butyl chloride gives rise to distinctly lower yields. This is also the case if the tertiary halide is added to a mixture of silyl enol ether and titanium tetrachloride. ... 

Titanium(IV) is a powerful but selective Lewis acid which can promote the coupling of allylsilanes with carbonyl compounds and derivatives In the presence of titanium tetrachlonde, benzalacetone reacts with allyltnmethylsilane by 1,4-addition to give 4-PHENYL-6-HEPTEN-2-ONE. Similarly, the enol silyl ether of cyclopentanone is coupled with f-pentyl chloride using titanium tetrachlonde to give 2-(tert-PENTYL)CYCLOPENTANONE, an example of a-tert-alkylation of ketones. 

Optically active (Z)-l-substituted-2-alkenylsilanes are also available by asymmetric cross coupling, and similarly react with aldehydes in the presence of titanium(IV) chloride by an SE process in which the electrophile attacks the allylsilane double bond unit with respect to the leaving silyl group to form ( )-s)vr-products. However the enantiomeric excesses of these (Z)-allylsilanes tend to be lower than those of their ( )-isomers, and their reactions with aldehydes tend to be less stereoselective with more of the (E)-anti products being obtained74. 

Surprisingly, the size of the silyl protecting group significantly influences the stereochemical outcome of aldol additions performed with the lithium enolates of (S )-l-trimethylsiloxy-and (S)-l-f< rt-butyldimethylsiloxy-l-cyclohexyl-2-butanone. Thus, the former reagent attacks benzaldehyde preferably from the Si-face (9 1), which is the opposite topicity to that found in the addition of the corresponding titanium enolates of either ketone ... 

Acetylsultam 15 is also used for stereoselective syntheses of a-unsubstituted /1-hydroxy-carboxylic acids. Thus, conversion of 15 into the silyl-A/O-ketene acetal 16 and subsequent titanium(IV) chloride mediated addition to aldehydes lead to the predominant formation of the diastereomers 17. After separation of the minor diastereomer by flash chromatography, alkaline hydrolysis delivers /f-hydroxycarboxylic acids 18, with liberation of the chiral auxiliary reagent 1919. 

A combination of diethylzinc with sulfonamides 18 or 19 offers another possibility for the enantioselective acetate aldol reaction39,41. The addition of silyl enol ethers to glyoxylates can be directed in a highly enantioselective manner when mediated by the binaphthol derived titanium complex 2040. 

Diastereoselection is also observed in the catalyzed [titanium tetrachloride (TiCI4)13, trimethyl-silyltrifluoromethanesulfonate (TMSTf)l4, zinc iodide (Znl2)15] reactions of silyl ketene acetal 1 with imines 2, The ami configuration of the product 3 dominates. 

The chiral (V-camphanoyl iminium ion 7, prepared by hydride abstraction from 2-camphanoyl-l,2,3,4-tetrahydro-6,7-dimethoxyisoquinoline 6 (see Appendix) with triphenylcarbenium te-trafluoroborate, reacts with silyl enol ethers to give 1-substituted tetrahydroisoquinoline derivatives with reasonable diastereoselectivity, 0°. On addition of titanium(IV) chloride, prior to the addition of the silyl enol ether, the diastereoselectivity gradually rises to an optimum at 2.5 equivalents of the Lewis acid, but the yield drops by 20%. 

Among the preformed enol derivatives used in this way have been enolates of magnesium, lithium, titanium, zirconium, and tin, ° silyl enol ethers, enol borinates,and enol borates, R CH=CR"—OB(OR)2. The nucleophilicity of silyl enol ethers has been examined. In general, metallic Z enolates give the syn (or erythro) pair, and this reaction is highly useful for the diastereoselective synthesis of these products. The ( ) isomers generally react nonstereoselectively. However, anti (or threo) stereoselectivity has been achieved in a number of cases, with titanium enolates, with magnesium enolates, with certain enol bor-inates, and with lithium enolates at — 78°C. ... 

Reaction conditions that involve other enolate derivatives as nucleophiles have been developed, including boron enolates and enolates with titanium, tin, or zirconium as the metal. These systems are discussed in detail in the sections that follow, and in Section 2.1.2.5, we discuss reactions that involve covalent enolate equivalents, particularly silyl enol ethers. Scheme 2.1 illustrates some of the procedures that have been developed. A variety of carbon nucleophiles are represented in Scheme 2.1, including lithium and boron enolates, as well as titanium and tin derivatives, but in... 

The enolates of other carbonyl compounds can be used in mixed aldol reactions. Extensive use has been made of the enolates of esters, thiol esters, amides, and imides, including several that serve as chiral auxiliaries. The methods for formation of these enolates are similar to those for ketones. Lithium, boron, titanium, and tin derivatives have all been widely used. The silyl ethers of ester enolates, which are called silyl ketene acetals, show reactivity that is analogous to silyl enol ethers and are covalent equivalents of ester enolates. The silyl thioketene acetal derivatives of thiol esters are also useful. The reactions of these enolate equivalents are discussed in Section 2.1.4. 

A titanium catalyst 20 that incorporates binaphthyl chirality along with imine and phenolic (salen) donors is highly active in addition of silyl ketene acetals to aldehydes.160... 

Scheme 2.9 gives some examples of use of enantioselective catalysts. Entries 1 to 4 are cases of the use of the oxazaborolidinone-type of catalyst with silyl enol ethers and silyl ketene acetals. Entries 5 and 6 are examples of the use of BEMOL-titanium catalysts, and Entry 7 illustrates the use of Sn(OTf)2 in conjunction with a chiral amine ligand. The enantioselectivity in each of these cases is determined entirely by the catalyst because there are no stereocenters adjacent to the reaction sites in the reactants. 

Nitroalkenes are also reactive Michael acceptors under Lewis acid-catalyzed conditions. Titanium tetrachloride or stannic tetrachloride can induce addition of silyl enol ethers. The initial adduct is trapped in a cyclic form by trimethylsilylation.316 Hydrolysis of this intermediate regenerates the carbonyl group and also converts the ad-nitro group to a carbonyl.317... 

Catalytic turn-over [59,60] in McMurry couplings [61], Nozaki-Hiyama reactions [62,63], and pinacol couplings [64,65] has been reported by Fiirst-ner and by Hirao by in situ silylation of titanium, chromium and vanadium oxo species with McaSiCl. In the epoxide-opening reactions, protonation can be employed for mediating catalytic turn-over instead of silylation because the intermediate radicals are stable toward protic conditions. The amount of Cp2TiCl needed for achieving isolated yields similar to the stoichiometric process can be reduced to 1-10 mol% by using 2,4,6-collidine hydrochloride or 2,6-lutidine hydrochloride as the acid and Zn or Mn dust as the reduc-tant (Scheme 9) [66,67]. 

The above-mentioned results indicate the additive effect of protons. Actually, a catalytic process is formed by protonation of the metal-oxygen bond instead of silylation. 2,6-Lutidine hydrochloride or 2,4,6-collidine hydrochloride serves as a proton source in the Cp2TiCl2-catalyzed pinacol coupling of aromatic aldehydes in the presence of Mn as the stoichiometric reduc-tant [30]. Considering the pKa values, pyridinium hydrochlorides are likely to be an appropriate proton source. Protonation of the titanium-bound oxygen atom permits regeneration of the active catalyst. High diastereoselectivity is attained by this fast protonation. Furthermore, pyridine derivatives can be recovered simply by acid-base extraction or distillation. 

A similar dichotomy was observed in the titanium catalyzed polymerization of primary silanes coupled to the hydrogenation of norbornene (20). At low catalyst concentration (ca. 0.004H), essentially complete conversion of norbornene to an equimolar mixture of norbornane and bis-phenylsilyl- (and/or 1,2-diphenyl-disilyl)norbornane was observed. Under these conditions no evidence for reduction of titanium was obtained. At higher catalyst concentrations (> 0.02M) rapid reduction of the dimethyltitanocene to J, and 2 occurs and the catalytic reaction produces mainly polysilane (DPn ca. 10) and norbornane in ca. 80 per cent yields, and silylated norbornanes in about 20 per cent yield. 

General Considerations. The following chemicals were commercially available and used as received 3,3,3-Triphenylpropionic acid (Acros), 1.0 M LiAlH4 in tetrahydrofuran (THF) (Aldrich), pyridinium dichromate (Acros), 2,6 di-tert-butylpyridine (Acros), dichlorodimethylsilane (Acros), tetraethyl orthosilicate (Aldrich), 3-aminopropyltrimethoxy silane (Aldrich), hexamethyldisilazane (Aldrich), tetrakis (diethylamino) titanium (Aldrich), trimethyl silyl chloride (Aldrich), terephthaloyl chloride (Acros), anhydrous toluene (Acros), and n-butyllithium in hexanes (Aldrich). Anhydrous ether, anhydrous THF, anhydrous dichloromethane, and anhydrous hexanes were obtained from a packed bed solvent purification system utilizing columns of copper oxide catalyst and alumina (ether, hexanes) or dual alumina columns (tetrahydrofuran, dichloromethane) (9). Tetramethylcyclopentadiene (Aldrich) was distilled over sodium metal prior to use. p-Aminophenyltrimethoxysilane (Gelest) was purified by recrystallization from methanol. Anhydrous methanol (Acros) was... 

The use of oxygen-containing dienophiles such as enol ethers, silyl enol ethers, or ketene acetals has received considerable attention. Yoshikoshi and coworkers have developed the simple addition of silyl enol ethers to nitroalkenes. Many Lewis acids are effective in promoting the reaction, and the products are converted into 1,4-dicarbonyl compounds after hydrolysis of the adducts (see Section 4.1.3 Michael addition).156 The trimethylsilyl enol ether of cyclohexanone reacts with nitrostyrenes in the presence of titanium dichloride diisopropoxide [Ti(Oi-Pr)2Cl2], as shown in Eq. 8.99.157 Endo approach (with respect to the carbocyclic ring) is favored in the presence of Ti(Oi-Pr)2Cl2. Titanium tetrachloride affords the nitronates nonselectively. 

Titanium-mediated intramolecular Friedel-Crafts acylation and alkylation are important methods for construction of fused-ring systems (Scheme 29).107 As well as aromatics, olefin units also react in the same way.108 Alkylation of electron-rich olefins such as enol ethers or silyl enol ethers proceeds effectively in the presence of TiCl4.109... 

TITANIUM-MEDIATED ADDITION OF SILYL DIENOL ETHERS TO ELECTROPHILIC GLYCINE A SHORT SYNTHESIS OF 4-KETOPIPECOLIC ACID HYDROCHLORIDE (Pipecolic acid, 4-oxo-, hydrochloride)... 

---