Titanium elemental

Ruthenium nowadays finds many uses in the electronics industry, particularly for making resistor tracks. It is used as an ingredient in various catalysts and, importantly, in electrode materials, e.g. Ru02-coated titanium elements in the chloralkali industry. Osmium tetroxide is a very useful organic oxidant and, classically, is used as a tissue stain. Both elements are employed in making certain platinum alloys. 

Historically, inexpensive titanium elemental powder has been produced fi om fines generated during the crushing of ti-... 

Besides stmctural variety, chemical diversity has also increased. Pure silicon fonns of zeolite ZSM-5 and ZSM-11, designated silicalite-l [19] and silicahte-2 [20], have been synthesised. A number of other pure silicon analogues of zeolites, called porosils, are known [21]. Various chemical elements other than silicon or aluminium have been incoriDorated into zeolite lattice stmctures [22, 23]. Most important among those from an applications point of view are the incoriDoration of titanium, cobalt, and iron for oxidation catalysts, boron for acid strength variation, and gallium for dehydrogenation/aromatization reactions. In some cases it remains questionable, however, whether incoriDoration into the zeolite lattice stmcture has really occurred. 

Titanium is not a rare element it is the most abundant transition metal after iron, and is widely distributed in the earth s surface, mainly as the dioxide TiOj and ilmenite FeTi03. It has become of commercial importance since World War II mainly because of its high strength-weight ratio (use in aircraft, especially supersonic), its... 

In this oxidation state the titanium atom has formally lost its 3d and 4s electrons as expected, therefore, it forms compounds which do not have the characteristics of transition metal compounds, and which indeed show strong resemblances to the corresponding compounds of the lower elements (Si, Ge, Sn, Pb) of Group IV—the group into which Mendeleef put titanium in his original form of the periodic table. 

Although vanadium has formally lost all its outer electrons in this state, the resemblance to the Group V elements is not so marked as that of titanium(IV) to Group IV. 

Locate the element titanium (Ti) in the Periodic Table. Read the following paragraph about its chemistry and answer the questions which follow. 

Scandium is a silver-white metal which develops a slightly yellowish or pinkish cast upon exposure to air. A relatively soft element, scandium resembles yttrium and the rare-earth metals more than it resembles aluminum or titanium. 

Titanium oxide bands are prominent in the spectra of M-type stars. The element is the ninth most abundant in the crust of the earth. Titanium is almost always present in igneous rocks and in the sediments derived from them. 

Titanium, when pure, is a lustrous, white metal. It has a low density, good strength, is easily fabricated, and has excellent corrosion resistance. It is ductile only when it is free of oxygen. The metal, which burns in air, is the only element that burns in nitrogen. 

Titanium dioxide is extensively used for both house paint and artist s paint, because it is permanent and has good covering power. Titanium oxide pigment accounts for the largest use of the element. Titanium paint is an excellent reflector of infrared, and is extensively used in solar observatories where heat causes poor seeing conditions. 

Fig. 10. Dow diaphragm ceU (a) Six-ceU series, (b) Internal ceU parts a, cathode elements b, cathode pocket elements c, copper spring cHps d, perforated steel backplate e, brine inlet f, chlorine oudet g, copper backplate h, titanium backplate i, anode element.

Titanium tetrafluoride may be prepared by the action of elemental fluorine on titanium metal at 250°C (5) or on Ti02 at 350°C. The most economical and convenient method is the action of Hquid anhydrous HF on commercially available titanium tetrachloride in Teflon or Kynar containers. Polyethylene reacts with TiCl and turns dark upon prolonged exposure. The excess of HF used is boiled off to remove residual chloride present in the intermediates. 

Hafnium [7440-58-6] Hf, is in Group 4 (IVB) of the Periodic Table as are the lighter elements zirconium and titanium. Hafnium is a heavy gray-white metallic element never found free in nature. It is always found associated with the more plentiful zirconium. The two elements are almost identical in chemical behavior. This close similarity in chemical properties is related to the configuration of the valence electrons, and for zirconium and... 

Whereas zirconium was discovered in 1789 and titanium in 1790, it was not until 1923 that hafnium was positively identified. The Bohr atomic theory was the basis for postulating that element 72 should be tetravalent rather than a trivalent member of the rare-earth series. Moseley s technique of identification was used by means of the x-ray spectra of several 2ircon concentrates and lines at the positions and with the relative intensities postulated by Bohr were found (1). Hafnium was named after Hafma, the Latin name for Copenhagen where the discovery was made. 

Low Expansion Alloys. Binary Fe—Ni alloys as well as several alloys of the type Fe—Ni—X, where X = Cr or Co, are utilized for their low thermal expansion coefficients over a limited temperature range. Other elements also may be added to provide altered mechanical or physical properties. Common trade names include Invar (64%Fe—36%Ni), F.linvar (52%Fe—36%Ni—12%Cr) and super Invar (63%Fe—32%Ni—5%Co). These alloys, which have many commercial appHcations, are typically used at low (25—500°C) temperatures. Exceptions are automotive pistons and components of gas turbines. These alloys are useful to about 650°C while retaining low coefficients of thermal expansion. Alloys 903, 907, and 909, based on 42%Fe—38%Ni—13%Co and having varying amounts of niobium, titanium, and aluminum, are examples of such alloys (2). 

The iodides of the alkaU metals and those of the heavier alkaline earths are resistant to oxygen on heating, but most others can be roasted to oxide in air and oxygen. The vapors of the most volatile iodides, such as those of aluminum and titanium(II) actually bum in air. The iodides resemble the sulfides in this respect, with the important difference that the iodine is volatilized, not as an oxide, but as the free element, which can be recovered as such. Chlorine and bromine readily displace iodine from the iodides, converting them to the corresponding chlorides and bromides. 

Laser Photochemistry. Photochemical appHcations of lasers generally employ tunable lasers which can be tuned to a specific absorption resonance of an atom or molecule (see Photochemical technology). Examples include the tunable dye laser in the ultraviolet, visible, and near-infrared portions of the spectmm the titanium-doped sapphire, Tfsapphire, laser in the visible and near infrared optical parametric oscillators in the visible and infrared and Line-tunable carbon dioxide lasers, which can be tuned with a wavelength-selective element to any of a large number of closely spaced lines in the infrared near 10 ]lni. 

Laser isotope separation techniques have been demonstrated for many elements, including hydrogen, boron, carbon, nitrogen, oxygen, sHicon, sulfur, chlorine, titanium, selenium, bromine, molybdenum, barium, osmium, mercury, and some of the rare-earth elements. The most significant separation involves uranium, separating uranium-235 [15117-96-1], from uranium-238 [7440-61-1], (see Uranium and uranium compounds). The... 

---