Titanium -Diisopropyl tartrate

A number of reaction variables or parameters have been examined. Catalyst solutions should not be prepared and stored since the resting catalyst is not stable to long term storage. However, the catalyst solution must be aged prior to the addition of allylic alcohol or TBHP. Diethyl tartrate and diisopropyl tartrate are the ligands of choice for most allylic alcohols. TBHP and cumene hydroperoxide are the most commonly used terminal oxidant and are both extremely effective. Methylene chloride is the solvent of choice and Ti(i-OPr)4 is the titanium precatalyst of choice. Titanium (IV) t-butoxide is recommended for those reactions in which the product epoxide is particularly sensitive to ring opening from alkoxide nucleophiles. ... 

The real breakthrough in the field of enantioselective epoxidation was reached by Sharpless and Katsuki with the development of the catalytic system consisting of titanium tetraisopropoxide and optically active diethyl- or diisopropyl tartrate (DET or DIPT) and water-free TBHP as oxygen donor (Scheme This milestone in synthetic organic... 

The Sharpless epoxidation of allylic alcohols with lert-butyl hydroperoxide/titanium tetraiso-propoxide/diisopropyl tartrate (DIPT) is a highly enantioface-selective reaction and follows the topicity shown51. 

Dichlorobis( 1 -phenylethoxy)-titanium(IV), 12 Diethyl tartrate, 276 2,2 -Dihydroxy-l, 1 -binaphthyl, 113 Diisopropyl tartrate, 276 Dimethyl tartrate, 124 Ephedrine, 298... 

Within limits, an increase in the steric bulk at the olefin terminus of allylic alcohols of the type R1 CH(OH)CH=CHR2 causes an increase in the rate of epoxidation of the more-reactive enantiomer, and a decrease in the rate for the less-reactive enantiomer, resulting in enhanced kinetic resolution334. However, complexes of diisopropyl tartrate and titanium tetra-terf-butoxide catalyse the kinetic resolution of racemic secondary allylic alcohols with low efficiency335. Double kinetic resolution techniques can show significant advantages over the simple Sharpless epoxidation techniques336. 

RESOLUTION (S)-l-Amino-2-(silyloxyme-thyl)pyrrolidines. 1,1 -Binaphthyl-2,2 -diyl hydrogen phosphate. r-Butyl hydroperox-ide-Diisopropyl tartrate-Titanium(IV) iso-propoxide. Di- x-carbonylhexacarbonyldi-cobalt. (2S)-(2a,3aa,4a,7a,7aa)-2,3,3a,4,5,6,7,7a-Octahydro-7,8,8-trime-thy 1-4,7-methanobenzofurane-2-ol. 

Asymmetric oxidation of ( )-3-phenyl-2-propenyl aryl selenides under Sharpless conditions (tetraisopropoxy titanium/tartrate/ferr-butyl hydroperoxide) afforded optically active alcohols in moderate to high enantiomeric excess (25-92% ee) and with yields of about 40%31b. The enantioselectivity in this reaction was enhanced remarkably by an ortho nitro group in the aryl ring and the use of diisopropyl tartrate ligand in the Sharpless oxidation. 

The Sharpless epoxidation of allyl alcohols 3.16 by /erf-butyl hydroperoxide under catalysis with chiral titanium complexes is a very popular method that has frequently been used in industry [811, 812, 853], This epoxidation was initially developed with stoichiometric amounts of tartrate catalysts. Today, it is usually performed in the presence of catalytic amounts of Ti(0/ -Pr)4 and diethyl or diisopropyl tartrate (2R,3R)- or (25,35)-2.69 (R = Et or r-Pr). The reactions are conducted at or near room temperature in the presence of molecular sieves. Several... 

In general, the reaction accomplishes the efficient asymmetric synthesis of hydroxymethyl epoxides from allylic alcohols (Scheme 8.4). Operationally, the catalyst is prepared by dissolving titanium isopropoxide, diethyl or diisopropyl tartrate (DET or DIPT, respectively), and molecular sieves in CH2CI2 at -20 °C, followed by addition of the allylic alcohol or t-BuOOH. After a brief weiiting period (presumably to allow the ligand equilibration to occur on titanium), the final component of the reaction is added. 

Kinetic resolution of secondary allylic alcohols by Sharpless asymmetric epoxidation using fert-butylhydroperoxide in the presence of a chiral titanium-tartrate catalyst has been widely used in the synthesis of chiral natural products. As an extension of this synthetic procedure, the kinetic resolution of a-(2-furfuryl)alkylamides with a modified Sharpless reagent has been used . Thus treatment of racemic A-p-toluenesulphonyl-a-(2-furfuryl)ethylamine [( )-74] with fert-butylhydroperoxide, titanium isopropoxide [Ti(OPr-/)4], calcium hydride (CaHa), silica gel and L-(+)-diisopropyl tartrate [l-(+)-DIPT] gave (S)-Al-p-toluenesulphonyl-a-(2-furfuryl)ethylamine [(S)-74] in high chemical yield and enantiomeric excess . Similarly prepared were the (S)-Al-p-toluenesulphonyl-a-(2-furfuryl)-n-propylamine and other homologues of (S)-74 using l-(+)-D1PT. When D-(—)-DIPT was used, the enantiomers were formed . ... 

Sharpless epoxidation of allyl alcohols (Sharpless, 1985, 1988 Pfenninger, 1986 Rossiter, 1985 Woodard et al., 1991 Finn and Sharpless, 1991 Corey, I990a,b), an example of which is included in Table 9.6, is perhaps the most recent and one of the most remarkable applications of asymmetric catalysis. The reaction is normally performed at low temperatures (-30 to 0°C) in methylene chloride with a titanium complex consisting of a chiral component [diethyl tartrate (DET) or diisopropyl tartrate (DIPT)] and a titanium salt (titanium tetraisopropoxide) as the catalyst. The beauty of the synthesis is that both enantiomers of the tartrate are available so that either form of the product can be prepared in more than 90% ee. 

The Sharpless asymmetric epoxidation of allylic alcohols (one of the reactions that helped K. Barry Sharpless earn his part of the 2001 Nobel Prize) offers a good example of an enantioselective technique that can be used to create either enantiomer of an epoxide product. This reaction uses a diester of tartaric acid, such as diethyl tartrate (DET) or diisopropyl tartrate (DIPT), as the source of chirality. The dialkyl tartrate coordinates with the titanium tetraisopropoxide [Ti(Oi-Pr)4] catalyst and t-butyl hydroperoxide (r-BuOOH) to make a chiral oxidizing agent. Since both enantiomers of tartaric acid are commercially available, and each enantiomer will direct the reaction to a different prochiral face of the alkene, both enantiomers of an epoxide can be synthesized. 

The reaction is normally performed at low temperatures (-30 to 0°) in methylene chloride, and is catalytic in the chiral component diethyl or diisopropyl tartrate (DET or DIPT), and in titanium tetra-isopropoxide, provided water is rigorously excluded 4 A molecular sieves may be added to ensure this. Both enantiomers of tartaric acid are commercially available, allowing the synthesis of either enantiomer of the epoxylalcohol. The key to the remarkable enzyme-like enantioselectivity lies in the complex formed from the... 

The poorer enantioselectivities observed in the Sharpless epoxid-ation of allylic alcohols following the use of 1 1 complexes of various sugar diols compared with diisopropyl tartrate has been ascribed to the observed formation of tricyclic dimers between the former and titanium tetraisopropoxide, whereas the latter gives a monocyclic 2 1 complex. 

Aldehydes and ketones are readily transformed into the corresponding cyanohydrin trimethylsilyl ethers when treated with cyanotrimethylsilane in the presence of Lewis acids (eq 1), triethylamine, or solid bases such as Cap2 or hydroxyapatite. The products can be readily hydrolyzed to the corresponding cyanohydrins. The cyanosilylation of aromatic aldehydes can be achieved with high enantioselectivity in the presence of catalytic amounts of a modified Sharpless catalyst consisting of titanium tetraisopropoxide and L-(+)-diisopropyl tartrate (eq 2). Catalysis with chiral titanium reagents yields aliphatic and aromatic cyanohydrins in high chemical and optical yields... 

The precatalyst, however, is a chiral rather than a Mo complex. It is generated by the in situ treatment of titanium isopropoxide with optically pure diethyl or diisopropyl tartrate. As L-tartaric acid is a natural product, the optically pure ligand is easily made. As shown by reaction 8.5.3.1, at the optimum Ti tartarate ratio (1 1.2), complex 8.32 is the predominant species in solution. This gives the catalytic system of highest activity and enantioselectivity. 

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... 

Although it was also Henbest who reported as early as 1965 the first asymmetric epoxidation by using a chiral peracid, without doubt, one of the methods of enantioselective synthesis most frequently used in the past few years has been the "asymmetric epoxidation" reported in 1980 by K.B. Sharpless [3] which meets almost all the requirements for being an "ideal" reaction. That is to say, complete stereofacial selectivities are achieved under catalytic conditions and working at the multigram scale. The method, which is summarised in Fig. 10.1, involves the titanium (IV)-catalysed epoxidation of allylic alcohols in the presence of tartaric esters as chiral ligands. The reagents for this asyimnetric epoxidation of primary allylic alcohols are L-(+)- or D-(-)-diethyl (DET) or diisopropyl (DIPT) tartrate,27 titanium tetraisopropoxide and water free solutions of fert-butyl hydroperoxide. The natural and unnatural diethyl tartrates, as well as titanium tetraisopropoxide are commercially available, and the required water-free solution of tert-bnty hydroperoxide is easily prepared from the commercially available isooctane solutions. 

---