Thermal properties mold temperature

The industrial value of furfuryl alcohol is a consequence of its low viscosity, high reactivity, and the outstanding chemical, mechanical, and thermal properties of its polymers, corrosion resistance, nonburning, low smoke emission, and exceUent char formation. The reactivity profile of furfuryl alcohol and resins is such that final curing can take place at ambient temperature with strong acids or at elevated temperature with latent acids. Major markets for furfuryl alcohol resins include the production of cores and molds for casting metals, corrosion-resistant fiber-reinforced plastics (FRPs), binders for refractories and corrosion-resistant cements and mortars. 

Thermal Properties. Thermal properties include heat-deflection temperature (HDT), specific heat, continuous use temperature, thermal conductivity, coefficient of thermal expansion, and flammability ratings. Heat-deflection temperature is a measure of the minimum temperature that results in a specified deformation of a plastic beam under loads of 1.82 or 0.46 N/mm (264 or 67 psi, respectively). Eor an unreinforced plastic, this is typically ca 20°C below the glass-transition temperature, T, at which the molecular mobility is altered. Sometimes confused with HDT is the UL Thermal Index, which Underwriters Laboratories estabflshed as a safe continuous operation temperature for apparatus made of plastics (37). Typically, UL temperature indexes are significantly lower than HDTs. Specific heat and thermal conductivity relate to insulating properties. The coefficient of thermal expansion is an important component of mold shrinkage and must be considered when designing composite stmctures. 

The PEEK resia is gray, crystalline, and has excellent chemical resistance T is ca 185°C, and it melts at 288°C. The unfilled resia has an HPT of 165°C, which can be iacreased to near its melting poiat by incorporating glass filler. The resia is thermally stable, and maintains ductiUty for over one week after being heated to 320°C it can be kept for years at 200°C. Hydrolytic stabiUty is excellent. The resia is flame retardant, has low smoke emission, and can be processed at 340—400°C. Crystallinity is a function of mold temperature and can reach 30—35% at mold temperatures of 160°C. Recycled material can be safely processed. Properties are given ia Table 16. 

FIRE RETARDANT FILLERS. The next major fire retardant development resulted from the need for an acceptable fire retardant system for such new thermoplastics as polyethylene, polypropylene and nylon. The plasticizer approach of CP or the use of a reactive monomer were not applicable to these polymers because the crystallinity upon which their desirable properties were dependent were reduced or destroyed in the process of adding the fire retardant. Additionally, most halogen additives, such as CP, were thermally unstable at the high molding temperatures required. The introduction of inert fire retardant fillers in 1965 defined two novel approaches to fire retardant polymers. 

The thermal properties (i.e., density, specific heat capacity, and thermal conductivity) have a particularly strong influence on the curing behavior. The exothermal peak temperature is one example It can differ significantly between a composite mold with low thermal mass and a metal mold [35], A more thorough discussion of pros and cons of different mold materials can be found in Morena [37]. 

Lightfoot (L5, L6) considered the solidification of a semi-infinite steel mass in contact with a semi-infinite steel mold, where the thermal properties of the phases were taken to be identical. In a later paper, (L7) different thermal constants for the liquid and solid metal and for the mold were assumed. With uniform initial phase temperatures, it is seen that all boundaries of the system are immobilized in jj-space. Yang (Y2) rederived this result and further extended the application of the similarity transformation to three-region problems with induced motion. An example is the condensation of vapor, as a result of sudden pressurization, in a tank with relatively thick walls. 

POLYCYCLO-ITEXYLENE-Dl METHYLENE TEREPHTHALATE. PCT is 1,4-cyclohexvlene-dimethylene terephthalate and is a high-temperature. semicrystalline thermoplastic polyester. PCT possesses excellent thermal properties. Injection molding is the predominant method of processing glass fiber-reinforced grades of PCT. It is widely used for... 

The term IM is an oversimplified description of a quite complicated process that is controllable within specified limits. Melted or plasticized plastic material is injected by force into a mold cavity (Figure 4.1). The mold may consist of a single cavity or a number of similar or dissimilar cavities, each connected to flow channels or runners which direct the flow of the melted plastic to the individual cavities (Chapter 17). The process is one of the most economical methods for mass production of simple to complex products. Three basic operations exist. They are the only operations in which the mechanical and thermal inputs of the injection equipment must be coordinated with the fundamental behavior properties of the plastic being processed. These three operations also are the prime determinants of the productivity of the process since manufacturing speed will depend on how fast we can heat the plastic to molding temperature, how fast we can inject it, and how long it takes to cool (or solidify) the product in the mold. 

The thermal properties (DSC second cycle), melt viscosities, and properties of test bars injected into unheated molds in a 1-oz Watson-Stillman injection-molding machine were determined as described earlier for the SDA copolyesters <2. 7. 81. The glass transition temperatures (Tg s) were determined on 1/16-in. thick injection-molded bars at 4°C/min and a frequency of 0.3 Hz with a Mark IV Dynamic Mechanical Thermal Analyzer from Polymer laboratories, Inc. 

The electronics industry desires improved flame suppressant additives for microelectronic encapsulants due to bromine induced failure. Epoxy derivatives of novolacs containing meta-bromo phenol have exhibited exceptional hydrolytic and thermal stability in contrast to standard CEN resins with conventional TBBA epoxy resins. When formulated into a microelectronic encapsulant, this stable bromine epoxy novolac contributes to significant enhancements in device reliability over standard resins. The stable bromine CEN encapsulant took about 30% more time to reach 50% failure than the bias pressure cooker device test. In the high temperature storage device test, the stable bromine CEN encapsulant took about 400% more time to reach 50% failure than the standard compound. Finally, the replacement of the standard resins with stable bromine CEN does not adversely affect the desirable reactivity, mechanical, flame retardance or thermal properties of standard molding compounds. 

---