Temperature chlorination and

Nitrogen and sodium do not react at any temperature under ordinary circumstances, but are reported to form the nitride or azide under the influence of an electric discharge (14,35). Sodium siHcide, NaSi, has been synthesized from the elements (36,37). When heated together, sodium and phosphoms form sodium phosphide, but in the presence of air with ignition sodium phosphate is formed. Sulfur, selenium, and tellurium form the sulfide, selenide, and teUuride, respectively. In vapor phase, sodium forms haHdes with all halogens (14). At room temperature, chlorine and bromine react rapidly with thin films of sodium (38), whereas fluorine and sodium ignite. Molten sodium ignites in chlorine and bums to sodium chloride (see Sodium COMPOUNDS, SODIUM HALIDES). 

The saturated hydrocarbons can react without a big disruption of the molecular structure only by displacement, or substitution of one atom for another. At room temperature, chlorine and bromine react very slowly with saturated straight-chain hydrocarbons. At... 

AmieU has studied the reactivity of the alkaline-earth and heavy-metal chlorates with sulfur in the presence of a little water and has found that below 50—60°C, chlorine dioxide is liberated, but that above these temperatures, chlorine and oxygen are evolved. This leads to occasional flaming in the presence of organic matter. Amiel also reports incandescent reactions between selenium and alkali chlorate. 

Attenuation, or moderation (principle 3), means reducing the severity of operation. If the use of a hazardous chemical in a process is unavoidable, then one needs to determine whether the severity of its usage could be moderated by operating the process at a lower pressure or temperature. Chlorine and ammonia can be... 

White and red phosphorus combine directly with chlorine, bromine and iodine, the red allotrope reacting in each case at a slightly higher temperature. The reactions are very vigorous and white phosphorus is spontaneously inflammable in chlorine at room temperature. Both chlorine and bromine first form a trihalide ... 

Phosphorus(III) oxide reacts slowly with oxygen at ordinary temperatures to give the pentoxide, P40,g. The reaction is rapid if the oxide is heated in air. It is oxidised vigorously by chlorine and bromine which form the oxidehalides, POX3. 

The molecular weight of a polymer can be controlled through the use of a chain-transfer agent, as well as by initiator concentration and type, monomer concentration, and solvent type and temperature. Chlorinated aUphatic compounds and thiols are particularly effective chain-transfer agents used for regulating the molecular weight of acryUc polymers (94). Chain-transfer constants (C at 60°C) for some typical agents for poly(methyl acrylate) are as follows (87) ... 

Chlorine, a member of the halogen family, is a greenish yellow gas having a pungent odor at ambient temperatures and pressures and a density 2.5 times that of air. In Hquid form it is clear amber SoHd chlorine forms pale yellow crystals. The principal properties of chlorine are presented in Table 15 additional details are available (77—79). The temperature dependence of the density of gaseous (Fig. 31) and Hquid (Fig. 32) chlorine, and vapor pressure (Fig. 33) are illustrated. Enthalpy pressure data can be found in ref. 78. The vapor pressure P can be calculated in the temperature (T) range of 172—417 K from the Martin-Shin-Kapoor equation (80) ... 

Chemical Properties. Under slightly acidic or basic conditions at room temperature, acetate and triacetate fibers are resistant to chlorine bleach at the concentrations normally used in laundering. 

Tetrachloroethylene can be prepared direcdy from tetrachloroethane by a high temperature chlorination or, more simply, by passing acetylene and chlorine over a catalyst at 250—400°C or by controlled combustion of the mixture without a catalyst at 600—950°C (32). Oxychl orin a tion of ethylene and ethane has displaced most of this use of acetylene. 

The reaction with fluorine occurs spontaneously and explosively, even in the dark at low temperatures. This hydrogen—fluorine reaction is of interest in rocket propellant systems (99—102) (see Explosives and propellants, propellants). The reactions with chlorine and bromine are radical-chain reactions initiated by heat or radiation (103—105). The hydrogen-iodine reaction can be carried out thermally or catalyticaHy (106). 

Sulfur generally becomes SO2, although some smaller amounts are possibly converted to SO, depending on temperature. Chlorine mosdy results in HCl, but some CI2 and atomic Cl forms as well. Any atomic Cl recombines to form CI2 if quenching is rapid. Low incineration temperatures favor CI2, and high temperatures favor atomic Cl. There is an optimal temperature for minimising the total effective CI2, ie, CI2 + Cl/2. 

Chlorine Addition. Chlorine addition and some chlorine substitution occurs at normal or slightly elevated temperatures in the absence of catalysts. The chlorination of molten naphthalene under such conditions yields a mixture of naphthalene tetrachlorides, a monochloronaphthalene tetrachloride, and a dichloronaphthalene tetrachloride, as well as mono- and dichloronaphthalenes (35). Sunlight or uv radiation initiates the addition reaction of chlorine and naphthalene resulting in the production of the di- and tetrachlorides (36). These addition products are relatively unstable and, at ca 40—50°C, they decompose to form the mono- and dichloronaphthalenes. 

Ha.logen Compounds. Fluorine is unreactive toward ozone at ordinary temperatures. Chlorine is oxidized to Cl20 and Cl20y, bromine to Br Og, and iodine to I2O2 and I4O2. Oxidation of haUde ions by ozone increases with the atomic number of haUde. Fluoride is unreactive chloride reacts slowly, ultimately forming chlorate and bromide is readily oxidized to hypobromite (38). Oxidation of iodide is extremely rapid, initially yielding hypoiodite the estimated rate constant is 2 x 10 (39). HypohaUte ions are oxidized to haUtes hypobromite reacts faster than hypochlorite (40). 

Chlorine heptoxide is more stable than either chlorine monoxide or chlorine dioxide however, the CX C) detonates when heated or subjected to shock. It melts at —91.5°C, bods at 80°C, has a molecular weight of 182.914, a heat of vapori2ation of 34.7 kj/mol (8.29 kcal/mol), and, at 0°C, a vapor pressure of 3.2 kPa (23.7 mm Hg) and a density of 1.86 g/mL (14,15). The infrared spectmm is consistent with the stmcture O CIOCIO (16). Cl O decomposes to chlorine and oxygen at low (0.2—10.7 kPa (1.5—80 mm Hg)) pressures and in a temperature range of 100—120°C (17). It is soluble in ben2ene, slowly attacking the solvent with water to form perchloric acid it also reacts with iodine to form iodine pentoxide and explodes on contact with a flame or by percussion. Reaction with olefins yields the impact-sensitive alkyl perchlorates (18). 

N,]S7-bis(methoxymethyl)uron was first isolated and described in 1936 (41), but was commercialized only in 1960. It is manufactured (42) by the reaction of 4 mol of formaldehyde with 1 mol of urea at 60°C under highly alkaline conditions to form tetramethylolurea [2787-01-1]. After concentration under reduced pressure to remove water, excess methanol is charged and the reaction continued under acidic conditions at ambient temperatures to close the ring and methylate the hydroxymethyl groups. After filtration to remove the precipitated salts, the methanolic solution is concentrated to recover excess methanol. The product (75—85% pure) is then mixed with a methylated melamine—formaldehyde resin to reduce fabric strength losses in the presence of chlorine, and diluted with water to 50—75% soHds. Uron resins do not find significant use today due to the greater amounts of formaldehyde released from fabric treated with these resins. 

Chemical Properties. The chemistry of the sulfur chlorides has been reviewed (141,142). Sulfur monochloride is stable at ambient temperature but undergoes exchange with dissolved sulfur at 100°C, indicating reversible dissociation. When distilled at its atmospheric boiling point, it undergoes some decomposition to the dichloride, but decomposition is avoided with distillation at ca 6.7 kPa (50 mm Hg). At above 300°C, substantial dissociation to S2 and CI2 occurs. Sulfur monochloride is noncombustible at ambient temperature, but at elevated temperatures it decomposes to chlorine and sulfur (137). The sulfur then is capable of burning to sulfur dioxide and a small proportion of sulfur trioxide. 

At present, thionyl chloride is produced commercially by the continuous reaction of sulfur dioxide (or sulfur trioxide) with sulfur monochloride (or sulfur dichloride) mixed with excess chlorine. The reaction is conducted in the gaseous phase at elevated temperature over activated carbon (178). Unreacted sulfur dioxide is mixed with the stoichiometric amount of chlorine and allowed to react at low temperature over activated carbon to form sulfuryl chloride, which is fed back to the main thionyl chloride reactor. 

The organic chemistry of sulfuryl chloride involves its use in chlorination and sulfonation (172,175,196,197). As a chlorinating agent, sulfuryl chloride is often mote selective than elemental chlorine. The use of sulfuryl chloride as a chlorinating agent often allows mote convenient handling and measurement as well as better temperature control because of the lower heat of reaction as compared with chlorine. Sulfuryl chloride sometimes affords better selectivity than chlorine in chlorination of active methylene compounds (198—200) ... 

---