Synthesis molecular sieves

Ethylbenzene plants, 23 330-331 Ethylbenzene-styrene complex, 23 328 Ethylbenzene synthesis molecular sieves in, 16 845 zeolite-based alkylation in, 23 331-333 Ethyl benzoate, 3 635 Ethyl P-D-glucopyranoside, 4 701 7-Ethylbicyclooxazolidine, antimicrobial used in cosmetics, 7 831t Ethyl bromide, physical properties of, 4 351t... 

Ethyl terl-butyl ether (ETBE), 10 548, 574, 576 12 404-405 derivation from ethanol, 10 557 Ethyltoluene, 23 329, 349 o-Ethyltoluene, 23 349 p-Ethyltoluene, 10 597 p-Ethyltoluene precursor, synthesis of, 23 351 p-Ethyltoluene synthesis, molecular sieves in, 16 846... 

Multifunctional catalysis, in which reactions consisting of several reaction steps are carried out by a shorter synthesis route, is becoming increasingly important in organic synthesis. Molecular sieve catalysts, too, help to combine several catalytic steps and tailor them optimally to one another [15, 18, 24], In this respect, molecular sieves like zeolites can be used as carriers for catalytically active components such as transition metals, noble metals. In addition the catalytic behaviour of these components the intrinsic acidic or basic or redox properties of the zeolites combined with shape selective feature are still present. 

Perego G, Millini R and Bellussi G 1998 Synthesis and characterization of molecular sieves containing transition metals in the framework Moiecuiar Sieves Science and Technoiogy vol 1, ed FI G Karge and J Weitkamp (Berlin ... 

Schunk S A and Schuth F 1998 Synthesis of zeolite-like inorganic compounds Molecular Sieves Science and Technology vo 1, ed H G Karge and J Weitkamp (Berlin Springer) pp 229-63... 

Nadimi S, Oliver S, Kuperman A, Lough A, Ozin G A, Garces J M, Olken M M and Rudolf P 1994 Nonaqueous synthesis of large zeolite and molecular sieve crystals Stud. Surf. Sol. Catal. 84 93-100... 

This book concentrates on synthesis and identification methods for molecular sieves including nonaluminosilicate molecular sieves and gives a good overview of structures and patented materials. 

A wide range and a number of purification steps are required to make available hydrogen/synthesis gas having the desired purity that depends on use. Technology is available in many forms and combinations for specific hydrogen purification requirements. Methods include physical and chemical treatments (solvent scmbbing) low temperature (cryogenic) systems adsorption on soHds, such as active carbon, metal oxides, and molecular sieves, and various membrane systems. Composition of the raw gas and the amount of impurities that can be tolerated in the product determine the selection of the most suitable process. 

Zeolites. A large and growing industrial use of aluminum hydroxide and sodium alurninate is the manufacture of synthetic zeoHtes (see Molecular sieves). ZeoHtes are aluminosiHcates with Si/Al ratios between 1 and infinity. There are 40 natural, and over 100 synthetic, zeoHtes. AH the synthetic stmctures are made by relatively low (100—150°C) temperature, high pH hydrothermal synthesis. For example the manufacture of the industriaHy important zeoHtes A, X, and Y is generaHy carried out by mixing sodium alurninate and sodium sHicate solutions to form a sodium alurninosiHcate gel. Gel-aging under hydrothermal conditions crystallizes the final product. In special cases, a small amount of seed crystal is used to control the synthesis. 

Dehydration. Use of molecular sieve driers for final clean-up of the carbon oxides and water in the synthesis gas to less than 1 ppm levels has gained prominence in low energy ammonia plant designs. The sieves are usually located at the interstage of the synthesis gas compressor to reduce volume requirements. The purified make-up gas can then be combined with the recycle and routed direcdy to the converter. 

Synthetic Fuels. Hydrocarbon Hquids made from nonpetroleum sources can be used in steam crackers to produce olefins. Fischer-Tropsch Hquids, oil-shale Hquids, and coal-Hquefaction products are examples (61) (see Fuels, synthetic). Work using Fischer-Tropsch catalysts indicates that olefins can be made directly from synthesis gas—carbon monoxide and hydrogen (62,63). Shape-selective molecular sieves (qv) also are being evaluated (64). 

R. Szostak, Molecular Sieves Principles of Synthesis and Identification, Van Nostrand Reinhold, New York, 1989. ISBN 0442280238. 

Rapid purification Stir over CaH2 (5% w/v) overnight, filter, then distil at 20mmHg. Store the distd DMF over 3A or 4A molecular sieves. For solid phase synthesis, the DMF used must be of high quality and free from amines. 

Hexametbyipbospboric triamide (HMPA) [680-31-9] M 179.2, f 7.2°, b 68-70°/lmm, 235°/760mm, d 1.024, n 1.460. The industrial synthesis is usually by treatment of POCI3 with excess of dimethylamine in isopropyl ether. Impurities are water, dimethylamine and its hydrochloride. It is purified by refluxing over BaO or CaO at about 4mm pressure in an atmosphere of nitrogen for several hours, then distd from sodium at the same pressure. The middle fraction (b ca 90°) is collected, refluxed over sodium under reduced pressure under nitrogen and distd. It is kept in the dark under nitrogen, and stored in solid CO2. Can also be stored over 4A molecular sieves. 

The diffusion, location and interactions of guests in zeolite frameworks has been studied by in-situ Raman spectroscopy and Raman microscopy. For example, the location and orientation of crown ethers used as templates in the synthesis of faujasite polymorphs has been studied in the framework they helped to form [4.297]. Polarized Raman spectra of p-nitroaniline molecules adsorbed in the channels of AIPO4-5 molecular sieves revealed their physical state and orientation - molecules within the channels formed either a phase of head-to-tail chains similar to that in the solid crystalline substance, with a characteristic 0J3 band at 1282 cm , or a second phase, which is characterized by a similarly strong band around 1295 cm . This second phase consisted of weakly interacting molecules in a pseudo-quinonoid state similar to that of molten p-nitroaniline [4.298]. 

Some workers avoid delay. Pai)adium-on-carbon was used effectively for the reductive amination of ethyl 2-oxo-4-phenyl butanoate with L-alanyl-L-proline in a synthesis of the antihyperlensive, enalapril maleate. SchifTs base formation and reduction were carried out in a single step as Schiff bases of a-amino acids and esters are known to be susceptible to racemization. To a solution of 4,54 g ethyl 2-oxO 4-phenylbutanoate and 1.86 g L-alanyl-L-proline was added 16 g 4A molecular sieve and 1.0 g 10% Pd-on-C The mixture was hydrogenated for 15 hr at room temperature and 40 psig H2. Excess a-keto ester was required as reduction to the a-hydroxy ester was a serious side reaction. The yield was 77% with a diastereomeric ratio of 62 38 (SSS RSS)((55). 

The emergence of the powerful Sharpless asymmetric epoxida-tion (SAE) reaction in the 1980s has stimulated major advances in both academic and industrial organic synthesis.14 Through the action of an enantiomerically pure titanium/tartrate complex, a myriad of achiral and chiral allylic alcohols can be epoxidized with exceptional stereoselectivities (see Chapter 19 for a more detailed discussion). Interest in the SAE as a tool for industrial organic synthesis grew substantially after Sharpless et al. discovered that the asymmetric epoxidation process can be conducted with catalytic amounts of the enantiomerically pure titanium/tartrate complex simply by adding molecular sieves to the epoxidation reaction mix-... 

Fischer-Tropsch synthesis products contain also high quantities of n-a-olefins that can be recovered by selective sorption processes with suitable molecular sieves [19]. A large-scale Fischer-Tropsch synthesis plant operates in South Africa [20]. Another plant was started in Indonesia in 1993 [21]. 

The rapid synthesis of 4-thiazolidinones by the MCR of an amine, aldehyde and mercaptoacetic acid has been developed under microwave-assisted conditions [73-75]. Irradiation of the three components in ethanol at 120 °C in the presence of molecular sieves [73] or in toluene at reflux under atmospheric conditions [74] in a single-mode microwave synthesizer gave the... 

Allylic alcohols can be converted to epoxy-alcohols with tert-butylhydroperoxide on molecular sieves, or with peroxy acids. Epoxidation of allylic alcohols can also be done with high enantioselectivity. In the Sharpless asymmetric epoxidation,allylic alcohols are converted to optically active epoxides in better than 90% ee, by treatment with r-BuOOH, titanium tetraisopropoxide and optically active diethyl tartrate. The Ti(OCHMe2)4 and diethyl tartrate can be present in catalytic amounts (15-lOmol %) if molecular sieves are present. Polymer-supported catalysts have also been reported. Since both (-t-) and ( —) diethyl tartrate are readily available, and the reaction is stereospecific, either enantiomer of the product can be prepared. The method has been successful for a wide range of primary allylic alcohols, where the double bond is mono-, di-, tri-, and tetrasubstituted. This procedure, in which an optically active catalyst is used to induce asymmetry, has proved to be one of the most important methods of asymmetric synthesis, and has been used to prepare a large number of optically active natural products and other compounds. The mechanism of the Sharpless epoxidation is believed to involve attack on the substrate by a compound formed from the titanium alkoxide and the diethyl tartrate to produce a complex that also contains the substrate and the r-BuOOH. ... 

Synthesis of Derivatizing Reagent III. We placed 50 mL of methanol, which had been previously dried over 4-S molecular sieves, in a 100-mL round-bottom flask and added 6.0 g of 2-hydroxynicotinic acid and 3 mL of boron trifluoride etherate. The solution was heated to reflux for 24 h and the solvent was removed under reduced pressure. The residue was dissolved in 50 mL of 0.1-ff sodium hydroxide and extracted with 60 mL of chloroform. The chloroform extract was concentrated under reduced pressure and the residue crystallized from isopropyl alcohol. The yield of 3-carbomethoxy-2(lH)pyridone was 5.0 g mp 152.5-154°C NMR (CDCI3) 6 3.85 (s, 3, -CH3), 6.34 (t, 1,... 

Karge, H.G. and Weitkamp J. (eds) (2002) Molecular Sieves 3 - Post-synthesis Modification I, Springer-Verlag, Heidelberg, pp. 203-255. 

U. (1998) Synthesis of porosils Crystalline nanoporous silicas with cage-and channel-like void structures in Molecular Sieves Science and Technology, vol. 1 (eds H.G.Karge and ). Weitkamp), Springer, Heidelberg, pp. 35-64. 

Thermal treatments can be applied to modify the properties of a material, for example, dealumination and optimization of crystalHne phases. These techniques do not require oxidants. Oxidative thermal treatments are generally employed to activate molecular sieves, by removing the organic templates employed during synthesis. This is one of the key steps when preparing porous catalysts or adsorbents. In air-atmosphere calcination, the templates are typically combusted between 400... 

Oxygen-containing molecules cannot be tolerated in the ammonia synthesis, primarily because they form iron oxide that blocks the active surface. First the CO2 is removed, through a scrubber, by reaction with a strong base. The remaining CO (and CO2) is then removed by the methanation reaction, converting the CO into methane and water. Finally the water is removed by, for example, molecular sieves. Methane does not present problems because it interacts weakly with the catalyst surface. The gas mixture (Tab. 8.6) is compressed to the roughly 200 bar needed for ammonia synthesis and admitted to the reactor. 

---