6- membered synthesis

Thiazolo-[2 c]> and -[3,2-h]>sym-triazoles (C2Nj-CjNS).—3-(2-Furyl)-5-phenylthiazolo[2,3-c]-sym-triazole (126) is obtainable from the appropriate triazole-5-thiol and phenacyl bromide by Hantzsch s synthesis.Members of the isomeric [3,2-b]-ring system (127) have been obtained by annelating... 

Glycine is the simplest member of a large and very important class of compounds, the a-amino-carboxylic acids. TTiere are many different methods available for the synthesis of amino-acids, but glycine can be readily prepared by the action of an excess of ammonia on chloroacetic acid ... 

Compounds containing a double or triple bond, usually activated by additional unsaturation (carbonyl, cyano, nitro, phenyl, etc.) In the ap position, add to the I 4-positions of a conjugated (buta-1 3-diene) system with the formation of a ax-membered ring. The ethylenic or acetylenic compound is known as the dieTwphile and the second reactant as the diene the product is the adduct. The addition is generally termed the Diels-Alder reaction or the diene synthesis. The product in the case of an ethylenic dienophile is a cyctohexene and in that of an acetylenic dienophile is a cyctohexa-1 4-diene. The active unsaturated portion of the dienophile, or that of the diene, or those in both, may be involved in rings the adduct is then polycyclic. 

In the Diels-Alder reaction (in older literature referred to as the diene synthesis ) a six-membered ring is fonned through fusion of a four-tt component, usually a diene and a two-7C component, which is commonly referred to as the dienophile (Scheme 1.1). 

Revision Problem 3 House fJ. Org. Chem., 1965, 3 1061) wanted to study intramolecular Diels-Alder reactions and wanted molecules Uke TM 396 in which n is 3 or 4, so that the product will have a 5 or 6 membered ring if the reaction works. It would obviously be a good thing if the synthesis can easily be modified to make other size rings as well. What do you suggest ... 

This cyclopentadione is needed to provide ring D in some steroid synthesis. Unlike the corresponding six-membered ring compound it is difficult to make. Can you suggest any solutions ... 

The synthesis of five-, six-, and seven-membered cyclic esters or timides uses intramolecular condensations under the same reaction condifions as described for intermolecular reactions. Yields are generally excellent. An example from the colchicine synthesis of E.E. van Ta-melen (1961) is given below. The synthesis of macrocyclic lactones (macrolides) and lactams (n > 8), however, which are of considerable biochemical and pharmacological interest, poses additional problems because of competing intermolecular polymerization reactions (see p. 246ff.). Inconveniently high dilution, which would be necessary to circumvent this side-... 

A completely different, important type of synthesis, which was developed more recently, takes advantage of the electrophilicity of nitrogen-containing 1,3-dipolar compounds rather than the nucleophilicity of amines or enamines. Such compounds add to multiple bonds, e.g. C—C, C C, C—O, in a [2 + 3 -cycioaddition to form five-membered heterocycles. 

A few typical examples indicate the large variety of five-membered heterocycles, which can be synthesized efficiently by [2 + 3]-cycloadditions. [2 + 2]-Cycloadditions are useful in the synthesis of certain four-membered heterocycles (H. Ulrich, 1967), e.g. of 8-lactams (J.R. 

The 1,6-difunctional hydroxyketone given below contains an octyl chain at the keto group and two chiral centers at C-2 and C-3 (G. Magnusson, 1977). In the first step of the antithesis of this molecule it is best to disconnect the octyl chain and to transform the chiral residue into a cyclic synthon simultaneously. Since we know that ketones can be produced from add derivatives by alkylation (see p. 45ff,), an obvious precursor would be a seven-membered lactone ring, which is opened in synthesis by octyl anion at low temperature. The lactone in turn can be transformed into cis-2,3-dimethyicyclohexanone, which is available by FGI from (2,3-cis)-2,3-dimethylcyclohexanol. The latter can be separated from the commercial ds-trans mixture, e.g. by distillation or chromatography. 

The two-bond disconnection (re/ro-cycloaddition) approach also often works very well if the target molecule contains three-, four-, or five-membered rings (see section 1.13 and 2.5). The following tricyclic aziridine can be transformed by one step into a monocyclic amine (W. Nagata, 1968). In synthesis one would have to convert the amine into a nitrene, which-would add spontcaneously to a C—C double bond in the vicinity. 

In spite of the diverse nature of alkaloid structures, two structural units, i.e. fused pyrrolidine and piperidine rings in different oxidation states, appear as rather common denominators. We therefore chose to give several examples for four types of synthetic reactions which have frequently been used in alkaloid total synthesis and which provide generally useful routes to polycyclic compounds with five- or six-membered rings containing one nitrogen atom. These are ... 

The intramolecular version for synthesizing cyclic and polycyclic compounds offers a powerful synthetic method for naturally occurring macrocyclic and polycyclic compounds, and novel total syntheses of many naturally occurring complex molecules have been achieved by synthetic designs based on this methodology. Cyclization by the coupling of an enone and alkenyl iodide has been applied to the synthesis of a model compound of l6-membered car-bomycin B 162 in 55% yield. A stoichiometric amount of the catalyst was used because the reaction was carried out under high dilution conditions[132]. 

Synthesis of camptothecin (163) is another example[133]. The iboga alkaloid analog 164 has been synthesized smoothly by the intramolecular coupling of iodoindole and unsaturated ester to form an eight-membered ring. Af-Methyl protection of the indole is important for a smooth reaction[134]. An efficient construction of the multifunctionalized skeleton 165 of congeners of FR900482 has been achieved[135]. 

The alkylpalladium intermediate 198 cyclizes on to an aromatic ring, rather than forming a three-membered ring by alkene insertion[161], Spirocyclic compounds are easily prepared[l62]. Various spiroindolines such as 200 were prepared. In this synthesis, the second ring formation involves attack of an alkylpalladium species 199 on an aromatic ring, including electron-rich or -poor heteroaromatic rings[l6.5]. 

Carbonylation of halides in the presence of primary and secondary amines at I atm affords amides[351j. The intramolecular carbonylation of an aryl bromide which has amino group affords a lactam and has been used for the synthesis of the isoquinoline alkaloid 498(352], The naturally occurring seven-membered lactam 499 (tomaymycin, neothramycin) is prepared by this method(353]. The a-methylene-d-lactam 500 is formed by the intramolecular carbonylation of 2-bromo-3-alkylamino-l-propene(354]. 

Intramolecular 1,4-addition is useful for macrolide synthesis. An unusual molecule of punctaporonin B (272) has been synthesized by this 1,4-addition of 271(160]. Cyclization to form the seventeen-membered ring macrolide 273 was carried out at 0.1-0.5 vi concentration[161. The choice of ligands seems to be important in the macrocyclization. The 26-membered ring model 274 for a synthesis of the ring system of tetrin A was obtained in 92% yield by using triisopropyl phosphite as a ligand[162]. 

Allyl aryl ethers are used for allylation under basic conditionsfh], but they can be cleaved under neutral conditions. Formation of the five-membered ring compound 284 based on the cyclization of 283 has been applied to the syntheses of methyl jasmonate (285)[15], and sarkomycin[169]. The trisannulation reagent 286 for steroid synthesis undergoes Pd-catalyzed cyclization and aldol condensation to afford CD rings 287 of steroids with a functionalized 18-methyl group 170]. The 3-vinylcyclopentanonecarboxylate 289, formed from 288, is useful for the synthesis of 18-hydroxyestrone (290)[I7I]. 

Intramolecular amination with allylic acetates is used for the synthesis of cyclic alkaloids 175]. Cyclization of 293 affords the six-membered ring compound 294 rather than a four-membered ring. The reaction is particularly... 

Acetoxy-l,7-octadiene (40) is converted into l,7-octadien-3-one (124) by hydrolysis and oxidation. The most useful application of this enone 124 is bisannulation to form two fused six-membered ketonesfl 13], The Michael addition of 2-methyl-1,3-cyclopentanedione (125) to 124 and asymmetric aldol condensation using (5)-phenylalanine afford the optically active diketone 126. The terminal alkene is oxidi2ed with PdCl2-CuCl2-02 to give the methyl ketone 127 in 77% yield. Finally, reduction of the double bond and aldol condensation produce the important intermediate 128 of steroid synthesis in optically pure form[114]. 

The telomer 145 of nitroethane was used for the synthesis of recifeiolide (148)[121], The nitro group was converted into a hydroxy group via the ketone and the terminal double bond was converted into iodide to give 146. The ester 147 of phenythioacetic acid was prepared and its intramolecular alkylation afforded the 12-membered lactone, which was converted into recifeiolide (148),... 

Lactones whose rings are three or four membered (a lactones and p lactones) are very reactive making their isolation difficult Special methods are normally required for the laboratory synthesis of small ring lactones as well as those that contain rings larger than SIX membered... 

Cyclopropanes can also be obtained by the reaction of vinyltrialkylborates with aldehydes followed by treatment with phosphoms pentachloride and base (300), and by the rearrangement of 5-substituted alkynyltrialkylborates (308). It is also possible to utilize this approach for the synthesis of five- and six-membered rings (3). Trans-1,4-elimination ia cycHc systems leads to the formation of stereodefined acycHc 1,5-dienes or medium-ring dienes, depending on the starting compound (309). 

Another important class of titanates that can be produced by hydrothermal synthesis processes are those in the lead zirconate—lead titanate (PZT) family. These piezoelectric materials are widely used in manufacture of ultrasonic transducers, sensors, and minia ture actuators. The electrical properties of these materials are derived from the formation of a homogeneous soHd solution of the oxide end members. The process consists of preparing a coprecipitated titanium—zirconium hydroxide gel. The gel reacts with lead oxide in water to form crystalline PZT particles having an average size of about 1 ]lni (Eig. 3b). A process has been developed at BatteUe (Columbus, Ohio) to the pilot-scale level (5-kg/h). 

P-Hydroxy acids lose water, especially in the presence of an acid catalyst, to give a,P-unsaturated acids, and frequendy P,y-unsaturated acids. P-Hydroxy acids do not form lactones readily because of the difficulty of four-membered ring formation. The simplest P-lactone, P-propiolactone, can be made from ketene and formaldehyde in the presence of methyl borate but not from P-hydroxypropionic acid. P-Propiolactone [57-57-8] is a usehil intermediate for organic synthesis but caution should be exercised when handling this lactone because it is a known carcinogen. 

In shape-selective catalysis, the pore size of the zeoHte is important. For example, the ZSM-5 framework contains 10-membered rings with 0.6-nm pore size. This material is used in xylene isomerization, ethylbenzene synthesis, dewaxing of lubricatius oils and light fuel oil, ie, diesel and jet fuel, and the conversion of methanol to Hquid hydrocarbon fuels (21). 

---