Surfactants viscosity

Thus, the enhancement of heat transfer may be connected to the decrease in the surface tension value at low surfactant concentration. In such a system of coordinates, the effect of the surface tension on excess heat transfer (/z — /zw)/ (/ max — w) may be presented as the linear fit of the value C/Cq. On the other hand, the decrease in heat transfer at higher surfactant concentration may be related to the increased viscosity. Unfortunately, we did not find surfactant viscosity data in the other studies. However, we can assume that the effect of viscosity on heat transfer at surfactant boiling becomes negligible at low concentration of surfactant only. The surface tension of a rapidly extending interface in surfactant solution may be different from the static value, because the surfactant component cannot diffuse to the absorber layer promptly. This may result in an interfacial flow driven by the surface tension gradi-... 

FIG. 5.12 Effect of rheology modifier concentration on cationic surfactant viscosity. 

WO 83/03621 (1983) [70] Kolodny et al. (American Home Prod.) Xanthan gum thickener mixture of anionic and nonionic surfactants Viscosity 3000-6000 cP yield point 250-825... 

Furthermore, the mechanisms that dominate gas holdup (e.g., surface tension, particle wettability, ionic force of surfactant, viscosity, and density) require consideration. If the liquid undergoes viscosity or density changes through, for example, particle addition, the initial bubble diameter does not affect gas holdup in the heterogeneous flow regime. If, on the other hand, the other mechanisms are affected... 

Active substances Quality Excipients Application Raw material Labelling Pharmacopoeia FRC Solvents Surfactants Viscosity enhancers Preservatives Colouring agents Herbal... 

Low cloud point surfactant viscosity stabilizer in natural soap systems. 

Mild, high-foaming surfactant viscosity enhancer when used with alkylsulfates and sulfonates. 

Uses Granulation binder in pharmaceutical controlled release hydrophilic matrix systems and controlled release coatings surfactant, viscosity modifier, and suspending agent In pharmaceutical liq. lems Regulatory USP, EP, JP, kosher... 

The energetics and kinetics of film formation appear to be especially important when two or more solutes are present, since now the matter of monolayer penetration or complex formation enters the picture (see Section IV-7). Schul-man and co-workers [77, 78], in particular, noted that especially stable emulsions result when the adsorbed film of surfactant material forms strong penetration complexes with a species present in the oil phase. The stabilizing effect of such mixed films may lie in their slow desorption or elevated viscosity. The dynamic effects of surfactant transport have been investigated by Shah and coworkers [22] who show the correlation between micellar lifetime and droplet size. More stable micelles are unable to rapidly transport surfactant from the bulk to the surface, and hence they support emulsions containing larger droplets. 

Eactors that could potentiaHy affect microbial retention include filter type, eg, stmcture, base polymer, surface modification chemistry, pore size distribution, and thickness fluid components, eg, formulation, surfactants, and additives sterilization conditions, eg, temperature, pressure, and time fluid properties, eg, pH, viscosity, osmolarity, and ionic strength and process conditions, eg, temperature, pressure differential, flow rate, and time. 

Microemulsion Polymerization. Polyacrylamide microemulsions are low viscosity, non settling, clear, thermodynamically stable water-in-od emulsions with particle sizes less than about 100 nm (98—100). They were developed to try to overcome the inherent settling problems of the larger particle size, conventional inverse emulsion polyacrylamides. To achieve the smaller microemulsion particle size, increased surfactant levels are required, making this system more expensive than inverse emulsions. Acrylamide microemulsions form spontaneously when the correct combinations and types of oils, surfactants, and aqueous monomer solutions are combined. Consequendy, no homogenization is required. Polymerization of acrylamide microemulsions is conducted similarly to conventional acrylamide inverse emulsions. To date, polyacrylamide microemulsions have not been commercialized, although work has continued in an effort to exploit the unique features of this technology (100). 

Emulsion Adhesives. The most widely used emulsion-based adhesive is that based upon poly(vinyl acetate)—poly(vinyl alcohol) copolymers formed by free-radical polymerization in an emulsion system. Poly(vinyl alcohol) is typically formed by hydrolysis of the poly(vinyl acetate). The properties of the emulsion are derived from the polymer employed in the polymerization as weU as from the system used to emulsify the polymer in water. The emulsion is stabilized by a combination of a surfactant plus a coUoid protection system. The protective coUoids are similar to those used paint (qv) to stabilize latex. For poly(vinyl acetate), the protective coUoids are isolated from natural gums and ceUulosic resins (carboxymethylceUulose or hydroxyethjdceUulose). The hydroHzed polymer may also be used. The physical properties of the poly(vinyl acetate) polymer can be modified by changing the co-monomer used in the polymerization. Any material which is free-radically active and participates in an emulsion polymerization can be employed. Plasticizers (qv), tackifiers, viscosity modifiers, solvents (added to coalesce the emulsion particles), fillers, humectants, and other materials are often added to the adhesive to meet specifications for the intended appHcation. Because the presence of foam in the bond line could decrease performance of the adhesion joint, agents that control the amount of air entrapped in an adhesive bond must be added. Biocides are also necessary many of the materials that are used to stabilize poly(vinyl acetate) emulsions are natural products. Poly(vinyl acetate) adhesives known as "white glue" or "carpenter s glue" are available under a number of different trade names. AppHcations are found mosdy in the area of adhesion to paper and wood (see Vinyl polymers). 

Nonionie Detergents. Nonionic surfactants rarely are used as the primary cleansing additives ia shampoos. They are generally poor foaming, but have value as additives to modify shampoo properties, eg, as viscosity builders, solubilizers, emulsifiers, and conditioning aids. 

The WAG process has been used extensively in the field, particularly in supercritical CO2 injection, with considerable success (22,157,158). However, a method to further reduce the viscosity of injected gas or supercritical fluid is desired. One means of increasing the viscosity of CO2 is through the use of supercritical C02-soluble polymers and other additives (159). The use of surfactants to form low mobihty foams or supercritical CO2 dispersions within the formation has received more attention (160—162). Foam has also been used to reduce mobihty of hydrocarbon gases and nitrogen. The behavior of foam in porous media has been the subject of extensive study (4). X-ray computerized tomographic analysis of core floods indicate that addition of 500 ppm of an alcohol ethoxyglycerylsulfonate increased volumetric sweep efficiency substantially over that obtained in a WAG process (156). 

Ophthalmic ointments usually contain petrolatum as the base. The petrolatum is sterilized by dry heat and combined with the sterile dmg powder under aseptic conditions. Ophthalmic suspensions contain very fine (- 10 ji) particle sized soHds suspended in an aqueous vehicle. The vehicle is adjusted to isotonicity and viscosity-increasing excipients, chelating agents, and surfactants also may be needed. The aqueous vehicle in these cases is generally autoclaved and mixed with sterile dmg powder asceptically (30). 

In addition to chemical and spectral sensitizers, several other classes of chemical compounds are added to emulsions before coating. Additives are used to facihtate coating operations, eg, surfactants (qv) and viscosity enhancers to reduce spontaneous development ia unexposed regions, eg, tetraazaiadenes and mercaptotetrazoles and to reduce abrasion and permit high temperature processing, eg, aldehydes (qv). 

Pigment Dispersion. AMP is used widely as a pigment dispersant for water-based paints and paper coatings. In small amounts, it efficiently disperses pigments and improves pH stabiUty, viscosity, corrosion inhibition, and odor (13). When AMP is used in conjunction with other surfactants, enhanced performance is obtained with less of these ingredients in the dispersion. 

---