Surface organic solvents

Self-assembled monolayers (SAMs) are molecular layers tliat fonn spontaneously upon adsorjDtion by immersing a substrate into a dilute solution of tire surface-active material in an organic solvent [115]. This is probably tire most comprehensive definition and includes compounds tliat adsorb spontaneously but are neither specifically bonded to tire substrate nor have intennolecular interactions which force tire molecules to organize tliemselves in tire sense tliat a defined orientation is adopted. Some polymers, for example, belong to tliis class. They might be attached to tire substrate via weak van der Waals interactions only. 

In contrast to tire preparation of LB films, tliat of SAMs is fairly simple and no special equipment is required. The inorganic substrate is simply immersed into a dilute solution of tire surface active material in an organic solvent (typically in tire mM range) and removed after an extended period ( 24 h). Subsequently, tire sample is rinsed extensively witli tire solvent to remove any excess material (wet chemical preparation). 

Anotlier model system consists of polymetliylmetliacrylate (PMMA) latex, stabilized in organic solvents by a comb polymer, consisting of a PMMA backbone witli poly-12-hydroxystearic acid (PHSA) chains attached to it [10]. The PHSA chains fonn a steric stabilization layer at tire surface (see section C2.6.4). Such particles can approach tire hard-sphere model very well [111. 

If a catalyst is to work well in solution, it (and tire reactants) must be sufficiently soluble and stable. Most polar catalysts (e.g., acids and bases) are used in water and most organometallic catalysts (compounds of metals witli organic ligands bonded to tliem) are used in organic solvents. Some enzymes function in aqueous biological solutions, witli tlieir solubilities detennined by the polar functional groups (R groups) on tlieir outer surfaces. 

If a compound has been recrystallised from petrol, benzene, etc.y some freshly cut shavings of clean paraffin wax should be added to the calcium chloride in (A) or to the sodium hydroxide in D, The surface of the wax absorbs organic solvent vapours (particularly the hydrocarbons) and the last trace of such solvents is thus readily removed from the recrystallised material. 

Moving-bed percolation systems are used for extraction from many types of ceUular particles such as seeds, beans, and peanuts (see Nuts). In most of these cases organic solvents are used to extract the oils from the particles. Pre-treatment of the seed or nut is usually necessary to increase the number of ceUs exposed to the solvent by increasing the specific surface by flaking or rolling. The oil-rich solvent (or misceUa) solution often contains a small proportion of fine particles which must be removed, as weU as the oil separated from the solvent after leaching. 

A varnish is often appHed on top of the paint layers. A varnish serves two purposes as a protective coating and also for an optical effect that enriches the colors of the painting. A traditional varnish consists of a natural plant resin dissolved or fused in a Hquid for appHcation to the surface (see Resins, natural). There are two types of varnish resins hard ones, the most important of which is copal, and soft ones, notably dammar and mastic. The hard resins are fossil, and to convert these to a fluid state, they are fused in oil at high temperature. The soft resins dissolve in organic solvents, eg, turpentine. The natural resin varnishes discolor over time and also become less soluble, making removal in case of failure more difficult (see Paint and FINNISH removers). Thus the use of more stable synthetic resins, such as certain methacrylates and cycHc ketone resins, has become quite common, especially in conservation practice. 

Membranes and Osmosis. Membranes based on PEI can be used for the dehydration of organic solvents such as 2-propanol, methyl ethyl ketone, and toluene (451), and for concentrating seawater (452—454). On exposure to ultrasound waves, aqueous PEI salt solutions and brominated poly(2,6-dimethylphenylene oxide) form stable emulsions from which it is possible to cast membranes in which submicrometer capsules of the salt solution ate embedded (455). The rate of release of the salt solution can be altered by surface—active substances. In membranes, PEI can act as a proton source in the generation of a photocurrent (456). The formation of a PEI coating on ion-exchange membranes modifies the transport properties and results in permanent selectivity of the membrane (457). The electrochemical testing of salts (458) is another possible appHcation of PEI. 

Emulsives are solutions of toxicant in water-immiscible organic solvents, commonly at 15 ndash 50%, with a few percent of surface-active agent to promote emulsification, wetting, and spreading. The choice of solvent is predicated upon solvency, safety to plants and animals, volatility, flammabiUty, compatibihty, odor, and cost. The most commonly used solvents are kerosene, xylenes and related petroleum fractions, methyl isobutyl ketone, and amyl acetate. Water emulsion sprays from such emulsive concentrates are widely used in plant protection and for household insect control. 

Properties. Hydroxypropylcellulose [9004-64-2] (HPC) is a thermoplastic, nonionic cellulose ether that is soluble in water and in many organic solvents. HPC combines organic solvent solubiUty, thermoplasticity, and surface activity with the aqueous thickening and stabilising properties characteristic of other water-soluble ceUulosic polymers described herein. Like the methylceUuloses, HPC exhibits a low critical solution temperature in water. 

---