Summary of costs

General purpose unsaturated polyester resin, blended with styrene = 80p kg-1 

Special purpose resin blended with styrene = up to 120p kg l 

Note The SMC and corresponding resin are the same price due to the relatively cheap additives used to make the SMC. 

Reinforced Plastics, Guide to Hand lay-up and Spray-up, Photocopying and Fabricating Owens-Corning Fibreglass Corporation, Toledo, Ohio, USA. 

Smith W.S., Plastics Bodywork for Truck Cabs, Europlastics Monthly April 1973, pp71-75. 

---

TABLE 1 Summary of Costs (in Dollars) Associated with Various Treatment Alternatives at Lawrence Livermore National Laboratory... 

TABLE 2 Centrifugal Shot Blasting Versus Baseline Mechanical Scabbling—Summary of Cost-Variable Conditions... 

Summary of Cost Comparisons for Radiation-Cured vs. Conventional Coatings on a Coil Coating Line... 

AETE (Aquatic Effects Technology Evaluation) (1998) Summary of Cost-effectiveness Evaluation of Aquatic Effects Monitoring Technologies Applied in the 1997AETE Field Evaluation Program. Beak International and Golder Associates, Ottawa, Ontario. 

The more serious accusations of profiteering were investigated by the Treasury in the light of the most recent summary of costs, which had risen by April, 1942, to 8,578,702. It was explained that due to the previously untried nature of the work the MAP initially awarded contracts on a costs plus profit basis, which in wartime was a notorious licence to print money. About half of the contracts were later renegotiated on a scheduled cost basis, 80% of which involved a bonus incentive, (80% of which was achieved). 

Early in July Mr Minns, the MOWB accountant at Corsham, forwarded yet another summary of costs to the Treasury which indicated a total of 9,917,387. This caused grave consternation, as an internal memorandum dated 25th July reveals ... 

U.S. Bureau of Mines — Mineral Industry Survey — Fuel Qil Sales Annual, Federal Power Commission — Annual Summary of Cost and Quality of Steam — Electric Plant Fuels... 

AppMidix C. SUMMARY OF COST SENSITIVITY DATA ON 16 MISSIONS... 

TABLE 4.15 Summary of Costs and Life Expectancy for New Construction Corrosion Control... 

TABLE 37.4 Summary of Costs for Direct-Nitrided Si3N4 Powder... 

It is difficult to give definite cost information as this varies from job to job and country to country. Summaries of costs for cathodic protection are given in Society for Cathodic Protection of Reinforced Concrete (1995) for the UK and in Bennett et sL (1993b) for the USA. These techniques are generally only specified if they offer a co,st saving to the owner of the structure over its lifetime (Unwin and Hall, 1993). 

Table 3 Summary of cost comparison for the five options...

For the mould tool assembly, the handling attributes data are shown in Fig. 7.12. Such details were captured for all the parts, including the purchased ones. A section of the assembly task sequence for the mould tool is shown in Fig. 7.13, including the summary of cost. 

TYPICAL EXAMPLE OF ECONOMICAL SUMMARY OF COST OF ENERGY (refer to Table 4) Saving in Energy Cost... 

The DiffEq example depicted earlier, was first presented in an early DAC paper [2] and used subsequently in the Splicer [16] and Catree [17] systems. The summary of costs for Aese and the HAL system is given in Table 1. interconnect, register and functional unit costs are given relative to the results of an early version [2] of the HAL system (which is normalized to a value of 100%). 

The consortium has developed an interactive cost model which provides comparative capital and operating cost data needed by manufacturers. A summary of cost model results for replacing variable power, 600W/in lamps with a similar output robotic curing cell is shown in the accompanying figure. 

---