Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Subject recommendations

Validate the cost to implement the subject recommendation. If it is not a cost effective measure or approach, include risk acceptance as an option with insurance alternatives. [Pg.68]

The large seareh engines (Tabic 5-6) generally provide a larger number of hits, hilt often from commercial if not even dubious sources. Yet if information on a new or rare compound is needed, they ean be recommended as a fust choice. The smaller subject engines provide more reliable data, but vary considerably in their results [47]. [Pg.272]

It is recommended that the reader become familiar with the point-group symmetry tools developed in Appendix E before proceeding with this section. In particular, it is important to know how to label atomic orbitals as well as the various hybrids that can be formed from them according to the irreducible representations of the molecule s point group and how to construct symmetry adapted combinations of atomic, hybrid, and molecular orbitals using projection operator methods. If additional material on group theory is needed. Cotton s book on this subject is very good and provides many excellent chemical applications. [Pg.149]

Type J thermocouples (Table 11.58) are one of the most common types of industrial thermocouples because of the relatively high Seebeck coefficient and low cost. They are recommended for use in the temperature range from 0 to 760°C (but never above 760°C due to an abrupt magnetic transformation that can cause decalibration even when returned to lower temperatures). Use is permitted in vacuum and in oxidizing, reducing, or inert atmospheres, with the exception of sulfurous atmospheres above 500°C. For extended use above 500°C, heavy-gauge wires are recommended. They are not recommended for subzero temperatures. These thermocouples are subject to poor conformance characteristics because of impurities in the iron. [Pg.1216]

Spectroscopy (Royal Society of Chemistry, 2002) approaches the subject at a simpler level than Modern Spectroscopy, being fairly non-mathematical and including many worked problems. Neither book is included in the bibliography but each is recommended as additional reading, depending on the level required. [Pg.473]

Weldments subjected to corrosive attack over a period of time may crack adjacent to the weld seams if the residual stresses are not removed. Gas—tungsten arc welding and gas—metal arc welding ate recommended for joining magnesium, the former for thinner materials and the latter for thicker materials. Maintaining a protective atmosphere is a critical issue in welding these alloys. [Pg.347]

Soft-wheat flours are sold for general family use, as biscuit or cake flours, and for the commercial production of crackers, pretzels, cakes, cookies, and pastry. The protein in soft wheat flour mns from 7 to 10%. There are differences in appearance, texture, and absorption capacity between hard- and soft-wheat flour subjected to the same milling procedures. Hard-wheat flour falls into separate particles if shaken in the hand whereas, soft-wheat flour tends to clump and hold its shape if pressed together. Hard-wheat flour feels slightly coarse and granular when mbbed between the fingers soft-wheat flour feels soft and smooth. Hard-wheat flour absorbs more Hquid than does soft-wheat flour. Consequently, many recipes recommend a variable measure of either flour or Hquid to achieve a desired consistency. [Pg.357]

Early applications of crystalline fructose focused on foods for special dietary applications, primarily calorie reduction and diabetes control. The latter application sought to capitalize on a signiftcandy lower serum glucose level and insulin response in subjects with noninsulin-dependent diabetes melUtus (21,22) and insulin-dependent diabetes (23). However, because fmctose is a nutritive sweetener and because dietary fmctose conversion to glucose in the hver requires insulin in the same way as dietary glucose or sucrose, recommendations for its use are the same as for other nutritive sugars (24). Review of the health effects of dietary fmctose is available (25). [Pg.45]

The metal parts of the injection molder, ie, the liner, torpedo, and nozzle, that contact the hot molten resin must be of the noncatalytic type to prevent accelerated decomposition of the polymer. In addition, they must be resistant to corrosion by HCl. Iron, copper, and zinc are catalytic to the decomposition and caimot be used, even as components of alloys. Magnesium is noncatalytic but is subject to corrosive attack, as is chromium when used as plating. Nickel alloys such as Duranickel, HasteUoy B, and HasteUoy C are recommended as constmction materials for injection-molding metal parts. These and pure nickel are noncatalytic and corrosion-resistant however, pure nickel is rather soft and is not recommended. [Pg.440]

Because of the importance of cellulose and the difficulty in unraveling its secrets, several societies (CeUucon, American Chemical Society, and TAPPI) are dedicated to cellulose, lignin, and related molecules, as is at least one journal that is abstracted by Chemicaly hstracts (3). The length of the proceedings of the Tenth Cellulose Conference (1638 pages) (4) indicates the vitaUty and interest in this subject, but research results are pubUshed in many other journals as well. There are also several recent books on cellulose (5—9). Reference 10 is a comprehensive review and is recommended especially for the historical review of proof of chemical stmcture, one of the milestones in organic chemistry. [Pg.237]

Certain commercial materials and equipment may be identified in the article for adequate definition of subject matter. In no instance does such identification imply recommendation or endorsement by the National Institute of Standards and Technology, or that the material or equipment is necessarily the best available for the purpose. [Pg.496]

N. R. Legge, G. Holden, and H. E. Schroeder, eds.. Thermoplastic Elastomers—H Comprehensive Keview Cad Hanser Vedag and Oxford University Press, Munich, New York, 1987. This reference and the next are recommended for readers who wish to obtain more detailed information on the subject. [Pg.21]

Perhaps the most precise, reHable, accurate, convenient, selective, inexpensive, and commercially successful electroanalytical techniques are the passive techniques, which include only potentiometry and use of ion-selective electrodes, either direcdy or in potentiometric titrations. Whereas these techniques receive only cursory or no treatment in electrochemistry textbooks, the subject is regularly reviewed and treated (19—22). Reference 22 is especially recommended for novices in the field. Additionally, there is a journal, Ion-Selective Electrode Reviews, devoted solely to the use of ion-selective electrodes. [Pg.55]

Pressure thrust, which is the product of the effective thrust area times the maximum pressure to which the joint will be subjected during normal operation. (For shp joints the effective thrust area shall be computed by using the outside diameter of the pipe. For corrugated, omega, or disk-type joints, the effective thrust area shall be that area recommended by the joint manufacturer. If this information is unobtainable, the effective area shall be computed by using the maximum inside diameter of the expansion-joint bellows.)... [Pg.1002]

The classic work on this subject is that of Ramachandran and Sharma [Trans. Inst. Chem. Ting., 49, 253 (1971)] and is recommended to those needing further details. The following references also are offered as a sampling of the literature on the subjec t ... [Pg.1369]

Desorption with Chemical Reaction When chemical reactions are involved in a stripping operation, the design problem can become extremely complex. In fact, much less is known about this very important process than is known about absorption. A classic work on this subject is that of Shah and Sharma [Trans. In.st. Chem. Tng., 54, 1 (1976)], which is recommended to those in need of more details. [Pg.1369]


See other pages where Subject recommendations is mentioned: [Pg.1116]    [Pg.129]    [Pg.281]    [Pg.317]    [Pg.16]    [Pg.1116]    [Pg.129]    [Pg.281]    [Pg.317]    [Pg.16]    [Pg.3032]    [Pg.478]    [Pg.637]    [Pg.657]    [Pg.141]    [Pg.1193]    [Pg.353]    [Pg.169]    [Pg.36]    [Pg.503]    [Pg.504]    [Pg.17]    [Pg.268]    [Pg.226]    [Pg.66]    [Pg.204]    [Pg.122]    [Pg.187]    [Pg.463]    [Pg.7]    [Pg.47]    [Pg.575]    [Pg.515]    [Pg.30]    [Pg.480]    [Pg.526]    [Pg.500]    [Pg.183]    [Pg.581]    [Pg.1926]   
See also in sourсe #XX -- [ Pg.97 , Pg.98 , Pg.176 ]




SEARCH



Subject recommended dietary allowance

© 2024 chempedia.info