Styrene reactivity

Steric effects similar to those in radical copolymerization are also operative in cationic copolymerizations. Table 6-9 shows the effect of methyl substituents in the a- and 11-positions of styrene. Reactivity is increased by the a-methyl substituent because of its electron-donating power. The decreased reactivity of P-methylstyrene relative to styrene indicates that the steric effect of the P-substituent outweighs its polar effect of increasing the electron density on the double bond. Furthermore, the tranx-fl-methylstyrene appears to be more reactive than the cis isomer, although the difference is much less than in radical copolymerization (Sec. 6-3b-2). It is worth noting that 1,2-disubstituted alkenes have finite r values in cationic copolymerization compared to the values of zero in radical copolymerization (Table 6-2). There is a tendency for 1,2-disubstituted alkenes to self-propagate in cationic copolymerization, although this tendency is low in the radical reaction. 

It has thus been suggested [223,224] that it is the kind of ligand rather than the kind of lanthanide that affects styrene reactivity in copolymerisation the optimum ligand at the rare-earth metal atom, which appeared to be CI3CCOO, gave an adequate energy level of the catalyst, thus favouring a proper balance of the donation and back-donation processes between styrene and the rare-earth metal for the copolymerisation. 

Tidwell has noted that the precision of most of the correlations of styrene reactivities is only fair. The correlation of the reactivity requires a choice of the acidity at which to make the comparison. The acidity dependences of the reactivity of these alkenes are not identical, and extrapolations through the... 

Table 6. Effect of Temperature on Copolymerization of Styrene Reactivity Ratios...

Unfortunately, the reaction fails with most a,o>-dienes. One reason for this is that the Ru catalyst isomerizes terminal a,co-dienes such as 1,7-heptadiene to internal dienes which are not reactive. Conjugated dienes such as 1,3-butadiene or 2,3-di-methyl-1,3-butadiene are also unreactive. Further C-C double bonds substituted with electron withdrawing groups such those of methyl acrylate, acrylonitrile, or methyl vinyl ketones do not react. So why are the C-C double bonds of vinylsilanes, vinyl-siloxanes and styrenes reactive Perhaps the simplest explanation is that silicon and... 

Remember from Sec. 1.3 that graft copolymers have polymeric side chains which differ in the nature of the repeat unit from the backbone. These can be prepared by introducing a prepolymerized sample of the backbone polymer into a reactive mixture—i.e., one containing a source of free radicals—of the side-chain monomer. As an example, consider introducing polybutadiene into a reactive mixture of styrene ... 

It is proposed to polymerize the vinyl group of the hemin molecule with other vinyl comonomers to prepare model compounds to be used in hemoglobin research. Considering hemin and styrene to be species 1 and 2, respectively, use the resonance concept to rank the reactivity ratios rj and X2. 

Alfrey assigned styrene an e value of-1.0, but this was revised to the present value, which gives better agreement with experimental reactivity ratios. 

Reactivity ratios for the 7V-vinylphthalimide (molecule 1)-styrene (molecule 2) system were measured, and foundt to be ri = 0.075 and I2 = 8.3. Use these values to estimate values of Q and e for 7V-vinylphthalimide then estimate the parameters rj and 12 for system in which molecule 2 is vinyl acetate. 

Styrene and methyl methacylate have been used as comonomers in many investigations of copolymerization. Use the following listj of ri values for each of these copolymerizing with the monomers listed below to rank the latter with respect to reactivity ... 

An emulsion model that assumes the locus of reaction to be inside the particles and considers the partition of AN between the aqueous and oil phases has been developed (50). The model predicts copolymerization results very well when bulk reactivity ratios of 0.32 and 0.12 for styrene and acrylonitrile, respectively, ate used. 

Acrylonitrile copolymeri2es readily with many electron-donor monomers other than styrene. Hundreds of acrylonitrile copolymers have been reported, and a comprehensive listing of reactivity ratios for acrylonitrile copolymeri2ations is readily available (34,102). Copolymeri2ation mitigates the undesirable properties of acrylonitrile homopolymer, such as poor thermal stabiUty and poor processabiUty. At the same time, desirable attributes such as rigidity, chemical resistance, and excellent barrier properties are iacorporated iato melt-processable resias. 

Acryhc stmctural adhesives have been modified by elastomers in order to obtain a phase-separated, toughened system. A significant contribution in this technology has been made in which acryhc adhesives were modified by the addition of chlorosulfonated polyethylene to obtain a phase-separated stmctural adhesive (11). Such adhesives also contain methyl methacrylate, glacial methacrylic acid, and cross-linkers such as ethylene glycol dimethacrylate [97-90-5]. The polymerization initiation system, which includes cumene hydroperoxide, N,1S7-dimethyl- -toluidine, and saccharin, can be apphed to the adherend surface as a primer, or it can be formulated as the second part of a two-part adhesive. Modification of cyanoacrylates using elastomers has also been attempted copolymers of acrylonitrile, butadiene, and styrene ethylene copolymers with methylacrylate or copolymers of methacrylates with butadiene and styrene have been used. However, because of the extreme reactivity of the monomer, modification of cyanoacrylate adhesives is very difficult and material purity is essential in order to be able to modify the cyanoacrylate without causing premature reaction. 

Brominated Styrene. Dibromostyrene [31780-26 ] is used commercially as a flame retardant in ABS (57). Tribromostyrene [61368-34-1] (TBS) has been proposed as a reactive flame retardant for incorporation either during polymerization or during compounding. In the latter case, the TBS could graft onto the host polymer or homopolymerize to form poly(tribromostyrene) in situ (58). 

Aromatic. Aromatic feedstreams (C-8, C-9, C-10) derived from the steam cracking of petroleum distillates are composed of styrene, iadene, vinyltoluenes (eg, meta- and i ra-methylstyrene), and their respective alkylated analogues. A typical aromatic feedstream might contain 50% reactive olefins with the remainder being alkylated benzenes and higher aromatics. 

Thermoplastic resins produced from pure monomers such as styrene, alkyl-substituted styrenes, and isobutylene are produced commercially. An advantage of these resins is the fact that they are typically lighter in color than Gardner 1 (water-white) without being hydrogenated. Among the earliest resins in this category were those made from styrene and sold as Piccolastic. Styrene and alkyl-substituted styrenes such as a-methylstyrene are very reactive toward Friedel-Crafts polymerization catalysts. 

AlkyUithium compounds are primarily used as initiators for polymerizations of styrenes and dienes (52). These initiators are too reactive for alkyl methacrylates and vinylpyridines. / -ButyUithium [109-72-8] is used commercially to initiate anionic homopolymerization and copolymerization of butadiene, isoprene, and styrene with linear and branched stmctures. Because of the high degree of association (hexameric), -butyIUthium-initiated polymerizations are often effected at elevated temperatures (>50° C) to increase the rate of initiation relative to propagation and thus to obtain polymers with narrower molecular weight distributions (53). Hydrocarbon solutions of this initiator are quite stable at room temperature for extended periods of time the rate of decomposition per month is 0.06% at 20°C (39). 

GopolymeriZation Initiators. The copolymerization of styrene and dienes in hydrocarbon solution with alkyUithium initiators produces a tapered block copolymer stmcture because of the large differences in monomer reactivity ratios for styrene (r < 0.1) and dienes (r > 10) (1,33,34). In order to obtain random copolymers of styrene and dienes, it is necessary to either add small amounts of a Lewis base such as tetrahydrofuran or an alkaU metal alkoxide (MtOR, where Mt = Na, K, Rb, or Cs). In contrast to Lewis bases which promote formation of undesirable vinyl microstmcture in diene polymerizations (57), the addition of small amounts of an alkaU metal alkoxide such as potassium amyloxide ([ROK]/[Li] = 0.08) is sufficient to promote random copolymerization of styrene and diene without producing significant increases in the amount of vinyl microstmcture (58,59). 

When using a cation source in conjunction with a Friedel-Crafts acid the concentration of growing centers is most often difficult to measure and remains unknown. By the use of stable carbocation salts (for instance trityl and tropyhum hexachloroantimonate) the uncertainty of the concentration of initiating cations is eliminated. Due to the highly reproducible rates, stable carbocation salts have been used in kinetic studies. Their use, however, is limited to cationicaHy fairly reactive monomers (eg, A/-vinylcarbazole, -methoxystyrene, alkyl vinyl ethers) since they are too stable and therefore ineffective initiators of less reactive monomers, such as isobutylene, styrene, and dienes. 

---