Strontium results

Radioactive Strontium. Numerous oral exposure have demonstrated the enhanced risk of reproductive effects and cancer in animals exposed to radiostrontium in utero or during lactation. At the higher levels used in injection studies, teratogenic effects were observed on bone development. The possibility of neurological deficits from gestational exposure to radioactive strontium, resulting from radiostrontium incorporation into the cranium and subsequent irradiation of adjacent brain tissue, should be explored. The toxicokinetic and bioavailability issues mentioned in the previous section on Stable Strontium apply to radioactive strontium. Low-level exposure studies should be conducted to evaluate possible impairment of immune function, which results from irradiation of bone marrow by radiostrontium incorporated into bone and which has been observed in animal studies at higher levels. ... 

In general, the chemistry of inorganic lead compounds is similar to that of the alkaline-earth elements. Thus the carbonate, nitrate, and sulfate of lead are isomorphous with the corresponding compounds of calcium, barium, and strontium. In addition, many inorganic lead compounds possess two or more crystalline forms having different properties. For example, the oxides and the sulfide of bivalent lead are frequendy colored as a result of their state of crystallisation. Pure, tetragonal a-PbO is red pure, orthorhombic P PbO is yeUow and crystals of lead sulfide, PbS, have a black, metallic luster. 

Historically, strontium metal was produced only in very small quantities. Rapid growth of metal production occurred during the late 1980s, however, owing to use as a eutectic modifier in aluminum—silicon casting alloys. The addition of strontium changes the microstmcture of the alloy so that the siUcon is present as a fibrous stmcture, rather than as hard acicular particles. This results in improved ductility and strength in cast aluminum automotive parts such as wheels, intake manifolds, and cylinder heads. 

Bismuth trioxide forms numerous, complex, mixed oxides of varying composition when fused with CaO, SrO, BaO, and PbO. If high purity bismuth, lead, and copper oxides and strontium and calcium carbonates are mixed together with metal ratios Bi Pb Sn Ca Cu = 1.9 0.4 2 2 3 or 1.95 0.6 2 2 3 and calcined at 800—835°C, the resulting materials have the nominal composition Bi PbQ4Sr2Ca2Cu20 and Bi 25PbQgSr2Ca2Cu20 and become superconducting at about 110 K (25). 

Historically, materials based on doped barium titanate were used to achieve dielectric constants as high as 2,000 to 10,000. The high dielectric constants result from ionic polarization and the stress enhancement of k associated with the fine-grain size of the material. The specific dielectric properties are obtained through compositional modifications, ie, the inclusion of various additives at different doping levels. For example, additions of strontium titanate to barium titanate shift the Curie point, the temperature at which the ferroelectric to paraelectric phase transition occurs and the maximum dielectric constant is typically observed, to lower temperature as shown in Figure 1 (2). 

Dentifrices are also vehicles for agents that alleviate dentinal hypersensitivity. Among the materials that have given positive results in clinical tests are potassium nitrate [7757-79-1] (5%) and strontium chloride [10476-85-4] (10%). 

To be effective, there must be a certain minimum concentration of inhibitor at the interface to be protected. Therefore, there must be sufficient inhibitor in the primer, and these inhibitors need to be soluble enough in water to enable transport of inhibitor to the oxide surface as water permeates the adhesive joint. However, too high of a solubility will rapidly deplete the primer layer of inhibitor resulting in a loss of protection. One of the fortuitous properties of zinc and strontium chromates is the limited solubility of these compounds in water (about 1.2 g/1 at 15°C [33]). 

Calcichrome. This indicator, cyclotris-7-( l-azo-8-hydroxynaphthalene-3,6-disulphonic acid), is very selective for calcium. It is in fact not very suitable as an indicator for EDTA titrations because the colour change is not particularly sharp, but if EDTA is replaced by CDTA (see Section 2.26), then the indicator gives good results for calcium in the presence of large amounts of barium and small amounts of strontium.13... 

Thermogravimetry may be used to determine the composition of binary mixtures. If each component possesses a characteristic unique pyrolysis curve, then a resultant curve for the mixture will afford a basis for the determination of its composition. In such an automatic gravimetric determination the initial weight of the sample need not be known. A simple example is given by the automatic determination of a mixture of calcium and strontium as their carbonates. 

Thus, for example a solution containing potassium ions at a concentration of 2000 mg L "1 added to a solution containing calcium, barium, or strontium ions creates an excess of electrons when the resulting solution is nebulised into the flame, and this has the result that the ionisation of the metal to be determined is virtually completely suppressed. 

Barium and strontium salts of polystyrene with two active end-groups per chain were prepared by Francois et al.82). Direct electron transfer from tiny metal particles deposited on a filter through which a THF solution of the monomer was percolated yields the required polymers 82). The A.max of the resulting solution depends on the DPn of the formed oligomers, being identical with that of the salt of polymers with one active end-group per chain for DPn > 10, but is red-shifted at lower DPn. Moreover, for low DPn, (<5), the absorption peak splits due to chromophor-chromophor interaction caused by the vicinity of the reactive benzyl type anions. 

Bones of 19 individuals were analyzed for strontium, rubidium and zinc. The number of samples was limited by the availability of bone after the stable isotope analyses were completed. Strontium was analyzed in order to test for trophic level, and to compare to other results obtained in the region on prehistoric peoples (Katzenberg 1984). Rubidium is not expected in human bone, so its presence acts as a measure of contamination. The use of zinc as a paleodi-etary indicator has been questioned recently (Ezzo 1994) and we were interested to see if there was any relationship between zinc content in food and bone. 

Of the three elements for which analyses were carried out, only strontium is thought to have potential as a dietary indicator (reviewed by Sandford 1992 Ezzo 1994 Burton and Price, this volume). Mean Rb for 19 samples is 6 ppm with a standard deviation of 0.7 ppm. Mean Zn for 19 samples is 571 ppm with a standard deviation of 220 ppm. The range for zinc is very large with a minimum value of 267 and a maximum value of 1,144. This range suggests that there is little to be learned regarding diet or physiology. Trace element results for bone samples are presented in Table 1.4. 

Recognition among bone-chemistry researchers that strontium enters bone in proportion to dietary levels has resulted in widely accepted yet erroneous inferences about the relationships among various elements in bone and past diet. One such inference is that more of any element in the diet translates directly to more of that element in bone. If an element is not biogenically incorporated within bone, or if biological levels are metabolically controlled, then that element will not reflect diet. A second erroneous inference is that strontium can be used to measure the dietary plant/meat ratio. Sr/Ca ratios in meat are generally lower than those of plants, but meat is also low in calcium and hence has little effect on the composition of bone. Plants, on the other hand, contribute substantially to bone composition. Variations in the strontium levels of bone thus more likely reflect differential consumption of plants rather than trophic position. Although efforts to determine plant/meat ratios from strontium and to draw dietary inferences from elements other than strontium and barium have not been successful, this failure has been due to inappropriate expectations, not to a failure of bone strontium to reflect diet. 

The low-temperature (/1-)AE3(BN2)2 phases exhibit two distinct structures for AE = Ca and Sr that can be derived from the cation disordering in their respective high-temperature phases. For / -Ca3(BN2)2 an orthorhombic (Cmca) superstructure of the cubic cell with fi-a bo a, Cq ly l a was obtained, in which the former 8f sites are occupied by seven calcium ions in an ordered fashion. In contrast, the structure of / -Sr3(BN2)2 is simply the result of a transition from a cubic body-centered (Im3m) into a primitive structure (Pm3m), in which the former 2 a position (0, 0, 0 1/2, 1/2, 1/2) is split into two independent positions, of which only one is occupied by strontium (Fig. 8.6). 

---