Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stationary phases preparation, protein

Sun XL, He XW, Chen LX, Zhang YK (2011) fii-column click preparation of hydrophobic organic monolithic stationary phases for protein separatirai. Anal Bioanal Chem 399 3407-3413... [Pg.187]

Proteins. A chiral stationary phase with immobilized a -acid glycoprotein on silica beads was introduced by Hermansson in 1983 [18, 19]. Several other proteins such as chicken egg albumin (ovalbumin), human serum albumin, and cellohy-drolase were also used later for the preparation of commercial CSPs. Their selectivity is believed to occur as a result of excess of dispersive forces acting on the more retained enantiomer [17]. These separation media often exhibit only modest loading capacity. [Pg.58]

Since the preparation of the PEO and PVP silicas was carried out under the circumstances corresponding to the plateau part of isotherms, it obviously led to tailed structures of the stationary phases. Their inherent repellency ensured the size-exclusion mechanism for chromatography of viruses and large proteins. [Pg.143]

The most reliable methods of the preparation of stable adsorbents involve, however, a covalent attachment of the polymeric stationary phases to the solid supporting material. In addition, the more diffuse interfaces formed in this case (see Sect. 2.2) are often favourable for the separation of proteins. [Pg.148]

The analysis demonstrates the elegant use of a very specific type of column packing. As a result, there is no sample preparation, so after the serum has been filtered or centrifuged, which is a precautionary measure to protect the apparatus, 10 p.1 of serum is injected directly on to the column. The separation obtained is shown in figure 13. The stationary phase, as described by Supelco, was a silica based material with a polymeric surface containing dispersive areas surrounded by a polar network. Small molecules can penetrate the polar network and interact with the dispersive areas and be retained, whereas the larger molecules, such as proteins, cannot reach the interactive surface and are thus rapidly eluted from the column. The chemical nature of the material is not clear, but it can be assumed that the dispersive surface where interaction with the small molecules can take place probably contains hydrocarbon chains like a reversed phase. [Pg.225]

There is a wide variety of commercially available chiral stationary phases and mobile phase additives.32 34 Preparative scale separations have been performed on the gram scale.32 Many stationary phases are based on chiral polymers such as cellulose or methacrylate, proteins such as human serum albumin or acid glycoprotein, Pirkle-type phases (often based on amino acids), or cyclodextrins. A typical application of a Pirkle phase column was the use of a N-(3,5-dinitrobenzyl)-a-amino phosphonate to synthesize several functionalized chiral stationary phases to separate enantiomers of... [Pg.12]

Membranes offer a format for interaction of an analyte with a stationary phase alternative to the familiar column. For certain kinds of separations, particularly preparative separations involving strong adsorption, the membrane format is extremely useful. A 5 x 4 mm hollow-fiber membrane layered with the protein bovine serum albumin was used for the chiral separation of the amino acid tryptophan, with a separation factor of up to 6.6.62 Diethey-laminoethyl-derivatized membrane disks were used for high-speed ion exchange separations of oligonucleotides.63 Sulfonated membranes were used for peptide separations, and reversed-phase separations of peptides, steroids, and aromatic hydrocarbons were accomplished on C18-derivatized membranes. [Pg.65]

Chemical surface modifications The first surface modification for the purpose of eliminating EOF and protein adsorption was recommended by Hjerten.28 The attachment of vinyl silanes allowed the polymerization of a variety of molecules to the surface. Most of the chemical modifications used for preparing capillaries for electrophoresis originated from the experience acquired over the years preparing GC and LC stationary phases. Chemical modification should conform to certain requirements, including the prevention of adsorption, the provision of stable and constant EOF over a wide pH range, chemical stability, ease of preparation, and reproduciblity of preparation. The effects of silanization of the inner surface of capillaries on electrophoretic separations have been extensively studied.26-29... [Pg.393]

Because plasma and urine are both aqueous matrixes, reverse-phase or polar organic mode enantiomeric separations are usually preferred as these approaches usually requires less elaborate sample preparation. Protein-, cyclodextrin-, and macrocyclic glycopeptide-based chiral stationary phases are the most commonly employed CSPs in the reverse phase mode. Also reverse phase and polar organic mode are more compatible mobile phases for mass spectrometers using electrospray ionization. Normal phase enantiomeric separations require more sample preparation (usually with at least one evaporation-to-dryness step). Therefore, normal phase CSPs are only used when a satisfactory enantiomeric separation cannot be obtained in reverse phase or polar organic mode. [Pg.328]

Reverse-phase HPLC (RP-HPLC) separates proteins on the basis of differences in their surface hydophobicity. The stationary phase in the HPLC column normally consists of silica or a polymeric support to which hydrophobic arms (usually alkyl chains, such as butyl, octyl or octadecyl groups) have been attached. Reverse-phase systems have proven themselves to be a particularly powerful analytical technique, capable of separating very similar molecules displaying only minor differences in hydrophobicity. In some instances a single amino acid substitution or the removal of a single amino acid from the end of a polypeptide chain can be detected by RP-HPLC. In most instances, modifications such as deamidation will also cause peak shifts. Such systems, therefore, may be used to detect impurities, be they related or unrelated to the protein product. RP-HPLC finds extensive application in, for example, the analysis of insulin preparations. Modified forms, or insulin polymers, are easily distinguishable from native insulin on reverse-phase columns. [Pg.184]

Although RP-HPLC has proven its analytical usefulness, its routine application to analysis of specific protein preparations should be undertaken only after extensive validation studies. HPLC in general can have a denaturing influence on many proteins (especially larger, complex proteins). Reverse-phase systems can be particularly harsh, as interaction with the highly hydrophobic stationary phase can induce irreversible protein denaturation. Denaturation would result in the generation of artifactual peaks on the chromatogram. [Pg.184]

Until the introduction of capillary columns, it was not possible to separate all the amino acids found in proteins on one column. The choice of stationary phase will depend upon the types of derivatives that have been prepared and in some situations it still may be preferable to use two different columns simultaneously. [Pg.372]


See other pages where Stationary phases preparation, protein is mentioned: [Pg.303]    [Pg.89]    [Pg.26]    [Pg.156]    [Pg.209]    [Pg.139]    [Pg.102]    [Pg.260]    [Pg.251]    [Pg.48]    [Pg.50]    [Pg.52]    [Pg.57]    [Pg.99]    [Pg.219]    [Pg.4]    [Pg.150]    [Pg.289]    [Pg.247]    [Pg.217]    [Pg.12]    [Pg.155]    [Pg.205]    [Pg.295]    [Pg.298]    [Pg.704]    [Pg.19]    [Pg.73]    [Pg.525]    [Pg.3]    [Pg.27]    [Pg.28]    [Pg.31]    [Pg.61]    [Pg.434]    [Pg.298]    [Pg.313]    [Pg.325]   
See also in sourсe #XX -- [ Pg.268 ]




SEARCH



Preparation phase

Protein phases preparation

Protein preparation

Proteins protein preparation

Stationary phases, preparation

© 2024 chempedia.info